OneTouch Ultra Plus Flex Handleiding

Bekijk gratis de handleiding van OneTouch Ultra Plus Flex (2 pagina’s), behorend tot de categorie Bloedsuikermeter. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.7 sterren uit 7 reviews. Heb je een vraag over OneTouch Ultra Plus Flex of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start Guide

OneTouch Ultra Plus Flex™ Blood Glucose

Monitoring System

Use this guide to get to know your meter, and follow the steps

inside to get started.

IMPORTANT: Please read the Owner's Booklet that came

with your system.

Intended use

The OneTouch Ultra Plus Flex™ Blood Glucose Monitoring System

is intended to be used for the quantitative measurement of

glucose (sugar) in fresh capillary whole blood samples drawn

from the fingertip.

The OneTouch Ultra Plus Flex™ Blood Glucose Monitoring System

is intended for self-testing outside the body (in vitro diagnostic

use) by people with diabetes at home as an aid to monitor

eectiveness of diabetes control.

Limitations

The OneTouch Ultra Plus Flex™ Blood Glucose Monitoring System

is intended to be used by a single patient and should not be

shared. Do not use on multiple patients. The OneTouch Ultra Plus

Flex™ System is not to be used for the diagnosis or screening

of diabetes or for neonatal use. The OneTouch Ultra Plus Flex™

System is not for use on critically ill patients, patients in shock,

severely dehydrated patients or hyperosmolar patients (with

or without ketosis). Do Not use the OneTouch Ultra Plus Flex™

System for alternate site testing (AST).

PLEASE REFER TO YOUR OWNER’S BOOKLET FOR ADDITIONAL

LIMITATIONS OF USE.

2

Take a test

Insert a test strip (blue side

and 2 silver prongs facing

you) to turn the meter on.

Flashing blood drop

appears.

Apply blood sample to the

channel on either side of

the test strip. Wait for the

channel to fill.

The channel turns red and

the meter counts down

from 5 to 1.

Turn it on

Press and hold until the

start-up screen appears.

1

Set the time and date on your meter

Set the time on the first SET screen

> Hour flashes. Press

if correct

or edit and confirm.

> Minutes flash. Press if correct

or edit and confirm.

> AM/PM flashes. Press if

correct or edit and confirm.

Set the date on the next SET screen

> Year flashes. Press

if correct

or edit and confirm.

> Month flashes. Press if

correct or edit and confirm.

> Day flashes. Press if correct

or edit and confirm.

Ready to test

Your meter setup is complete when

the screen with 3 dashes appears.

Use

buttons to edit each

setting and press to confirm.

AW 07295201A

Register your meter or download

the Spanish Owners booklet

support.onetouch.com

Product specificaties