OmniMount OBT125 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor OmniMount OBT125 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 1.5 gebruikers gemiddeld met 4.9 sterren beoordeeld

Pagina 1/12
Instruction Manual /Manual De Instrucciones
OBT125
LOW PROFILE FLAT PANEL TILT MOUNT
Reduce.Reuse.Recycle
Max screen size: 80”
Max weight 125 lbs 56.7kg
CAUTION: DO NOT EXCEED MAXIMUM
LISTED WEIGHT CAPACITY. SERIOUS
OCCUR
!
ISSUES/QUESTIONS? / ¿PREGUNTAS?
STOP
PARADA
HAVE A SMARTPHONE?/ ¿TIENES UN TELEFONO INTELIGENTE?
Before you return this product to Sam’s Club,
please let us help you. You can reach us by
phone 24/7 at 877.PLUGD.IN (877.758.4346).
Antes de devolver este producto al Sam’s Club, por
favor, déjenos ayudarle. Usted puede contactarnos por
teléfono 24/7 llame al 877.PLUGD.IN (877.758.4346).
Scan this QR code with your Smartphone to see
a short installation video. This installation video
is for demonstration purposes only. Please refer
to this manual for complete instructions.
Escanear este codigo QR con su teléfono inteligente para
ver un corto video de instalación. Este video de instalación
es con proposito de demostracion. Consulte el manual
para completar las instrucciones.
PN: 888-61-040-M-00 revD
OM1100602
P2
125lbs
56.7kg
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER
INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.
If you do not understand the instructions or have any concerns or questions, please contact us 24/7 at
877.PLUGD.IN (877.758.4346).
Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts
please call 877.PLUGD.IN (877.758.4346).
FOR WALL MOUNTED PRODUCT: This product has been designed for use on a vertical wall constructed of
wood studs or solid concrete. Wood studs being defined as a wall consisting of a minimum of 2” x 4” studs
with a maximum of 24” stud spacing and a minimum of 16” stud spacing with a maximum of ½” inch of wall
covering (drywall, lath, plaster). For custom installations please contact 877.PLUGD.IN (877.758.4346). For
safe installation, the wall you are mounting to must support 4 times the weight of the total load (flat panel and
wall mount). If not, the surface must be reinforced to meet this standard. The installer is responsible for
verifying that the wall structure/surface and the anchors used in the installation will safely support the total
load. Do not use this product for any application other than those specified by OmniMount.
This product may contain moving parts. Use with caution.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.
WARNING!
¡ADVERTENCIA!
MAXIMUM WEIGHT CAPACITY
MÁXIMA CAPACIDAD DE PESO
POUNDS (LBS) / KILOGRAMS (KG)
LIBRAS (LB) / KILOGRAMOS (KG)
MAXIMUM SCREEN SIZE
TAMAÑO DE PANTALLA MÁXIMO
COMPLETE UNIT 125 (LBS) / 56.7 (KG) 80 in.
80”
LA INSTALACIÓN O EL MONTAJE INAPROPIADOS PUEDEN PROVOCAR LESIONES, DAÑOS
MATERIALES O INCLUSO LA MUERTE. ANTES DE COMENZAR, LEA LAS SIGUIENTES
ADVERTENCIAS.
Si las instrucciones no le resultan claras o si tiene alguna duda o pregunta, comuníquese con un instalador calificado. Si
el producto o el hardware está dañado o no se le envió alguna pieza, no realice la instalación ni el montaje. Si necesita
piezas de repuesto, comuníquese con el servicio de Atención al cliente llame al 877.PLUGD.IN (877.758.4346).
Para montaje en la pared:Este producto está diseñado para ser instalado en paredes verticales con paneles de madera u
hormigón. Se define a los paneles verticales como una pared que consiste de un mínimo de paneles de 5 x 10 cm con un espacio
entre paneles máximo de 60 cm y un espacio mínimo entre paneles de 41 cm, con un máximo de cobertura de pared (hoja de
yeso, listón, yeso) de 13 mm. Para instalaciones a medida contacte 877.PLUGD.IN (877.758.4346). Para realizar una instalación
segura, la pared elegida debe ser capaz de soportar 4 veces el peso de la carga total (montaje plano del panel y de la pared). De
lo contrario, deberá reforzar la superficie para que cumpla con este requisito. El instalador es el responsable de comprobar que la
estructura/superficie de la pared y los tacos que se utilizan en la instalación soporten la carga total de manera segura.
Este producto puede contener componentes móviles. Úselo con precaución.
NO EXCEDA LA CAPACIDAD DE PESO MÁXIMA PARA ESTE PRODUCTO.
USE WITH FLAT PANELS LARGER THAN THE MAXIMUM
WEIGHT AND/OR SCREEN SIZE MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY.
EL USO CON DE LA MONTURA CON TELEVISORES MÁS
GRANDES QUE EL PESO O EL TAMAÑO MAXIMO PUEDES
PROVOCAR LA FALLA DE LA MONTURA Y PROVOCAR LESIONES.
PN: 888-61-040-M-00
W-C
W-A W-B
X2 X2 X2
CONTENTS / CONTENIDO
SCREW / HARDWARE PACK FOR WALL
SCREW / HARDWARE PACK FOR TV / TORNILLOS / KIT PARA LA TV
Wall Kit 516-2vC
Monitor Kit L-U-vD
CONTENTS / CONTENIDO
5
2
3
4
6
1
Contents
Part # Qty
Description
1 1 Wall Plate
2 1 Vertical Rail - Right
3 1 Vertical Rail - Left
4 1 Locking Bar
5 2 Wall Plate Covers
6 2 Tilt Tension Knobs
7 1 Stud Finder/Level
8 2 Tilt Pins: For 80” TV’s
7
Screws / Hardware for TV (BOP:697-613-00)
Part # Qty
Description
M-A 4 Philips screws M4 x 15mm
M-B 4 Philips screws M4 x 30mm
M-C 4 Philips screws M5 x 15mm
M-D 4 Philips screws M5 x 30mm
M-E 4 Philips screws M6 x 15mm
M-F 4 Philips screws M6 x 30mm
M-G 4 Philips screws M8 x 15mm
M-H 4 Philips screws M8 x 30mm
M-I 4 Round Spacers: M6 - M8 x 5mm
M-J 4 Round Spacers: M6 – M8 x 10mm
M-K 4 Round Washer: M4-M5
M-L 4 Round Washer: M6-M8
Screws / Hardware for Wall (BOP:697-582-00)
Part # Qty
Description
W-A 2 Lag Bolts (8mm x 65mm)
W-B 2 Steel Washer (18mm x 8.5mm x 1.5mm)
W-C 2 Wall Anchor (10mm OD x 8mm ID)
M-A M-B M-C M-D M-E M-F M-G M-H
M-I
X4 X4 X4X4 X4 X4 X4 X4
X4
Spacers
M-L
Washers
M-J
X4
Spacers
M-K
Washers
X4 X4
8
PN: 888-61-040-M-00


Product specificaties

Merk: OmniMount
Categorie: Niet gecategoriseerd
Model: OBT125

Heb je hulp nodig?

Als je hulp nodig hebt met OmniMount OBT125 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden