Olympus DP-10 Handleiding

Olympus Geluid DP-10

Lees hieronder de 📖 handleiding in het Nederlandse voor Olympus DP-10 (6 pagina's) in de categorie Geluid. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
VOICE RECORDER
NOTE CORDER DP-10
EN
INSTRUCTIONS
Thank you for purchasing an Olympus Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we recommend that
you test the record function and volume before use.
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan.
Tel. +81 (0)3-3340-2111
http://www.olympus.com
3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.
Tel. 1-888-553-4448
http://www.olympusamerica.com
For customers in North and South America:
Canadian RFI:
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Cet appareil numérique ne dépasse pas les limites de la Catégorie B pour
les émissions de bruit radio émanant d’appareils numériques, tel que prévu
dans les Règlements sur l’Interférence Radio du Département Canadien des
Communications.
Declaration of Conformity
Model Number: DP-10
Trade Name: DIGITAL VOICE RECORDER
Responsible Party: OLYMPUS IMAGING AMERICA INC.
Address: 3500 Corporate Parkway, P.O. Box 610, Center Valley,
PA 18034-0610,U.S.A.
Telephone Number: 1-888-553-4448
This device Complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Recording
Recording
High
Low
Playback
Playback
U1-BS0596-01
AP1007
Introduction
The contents of this document may be changed in the future without advanced
notice. Contact our Customer Support Center for the latest information relating
to product names and model numbers.
The screen and recorder illustrations shown in this manual were produced during
the development stages and may differ from the actual product. The utmost care
has been taken to ensure the integrity of the contents of this document. In the
unlikely event that a questionable item, error, or omission is found, please contact
our Customer Support Center.
Any liability for passive damages or damage of any kind occurred due to data loss
incurred by a defect of the product, repair performed by the third party other
than Olympus or an Olympus authorized service station, or any other reason is
excluded.
```
a Current date
b Recording mode indicator
c Microphone sensitivity indicator
d Total number of recorded fi les
for the date
e Current le number
f Elapsed recording time
g Remaining recording time
a
b
c
d
e
f
g
```
Getting started
1 Inserting batteries 2 Turning on the power
Slide the POWER switch to the [ON] position.
Turning off the power:
While the recorder is in stop mode, slide the POWER switch to the
[OFF/HOLD] position.
Power save mode:
If the recorder is on and stops for 10 minutes or longer, the display
shuts off and it goes into power save mode. To exit power save mode,
press any button.
HOLD:
If you slide the POWER switch to the [OFF/HOLD] position, the
current conditions will be preserved, and all buttons and switches
will be disabled.
Strap hole
Strap is not supplied.
Battery indicator:
When [
] appears on the display, replace the batteries as soon as possible.
When the batteries are too weak, [
] and [Battery Low] appears on the
display and the recorder shuts down.
First, set the time and date.
“Setting time and date” (Verso)
“Changing the recording mode” (Verso)
Recording indicator light is lit while recording.
Pause
Microphone sensitivity
Turn the microphone in
the direction of the source
to be recorded.
High
Low
This is a highly sensitive mode which can record
surrounding noises. (
A
H
)
This is the standard
level of microphone
sensitivity. (
A
L
)
To ensure successful recordings, we recommend that you test the record function and
volume before use.
To ensure recording from the beginning, start recording after you see the recording
indicator light on.
Recorder will not be able to record anymore when [Memory Full] or [Maximum File
Size is reached] appears. Delete any unnecessary fi les before recording any further.
If the recorder is placed directly on a table when recording a conference, etc., the
vibrations of the table are likely to be recorded. To obtain a clear recording, place a
notebook or handkerchief between the recorder and the table to prevent the vibrations
from being recorded.
When remaining recording time is less than 60 seconds, the recording indicator light
starts fl ashing. When the recording time is decreasing to 30 or 10 seconds, the light
ashes faster.
Recording
Recording
Recording
Recording
When you use this recorder for the fi rst time after purchasing, or when you switch it on after removing the batteries for more than
30 minutes when exchanging batteries etc, the time will return to the default setting and the [Set Time & Date] will appear.
If the time and date are not set, the fi le is saved using default time and date.
High
Low
Playback
Playback
You can
also change
the recording
mode!
If the recorder is in recording mode and the REC (x)
button is pressed, recording pauses. If the REC (x)
button is pressed again, recording resumes.
The recorder will time out after 60 minutes
when left in [PAUSE].
Set the recording mode to match the surrounding conditions.
``` ``` ```
```
a
b
c
d
Recording
Recording
a Recording date
b Current le number
c Elapsed playback time
d Playback position bar indicator
Forwarding and Rewinding
Changing the playback speed
Noise cancel
Fast
Slow
Noise Cancel indicator
On
Off
Noise will be reduced in
the file when it’s played
back for better sound
quality.
When the earphone is used, the recorder speaker will be
switched-off. Playback is in monaural.
To avoid irritation to the ear, insert the
earphone after turning down the volume
level. When you listen with the earphone
during playback, do not raise the volume
too much. It may cause hearing impair-
ment and a decrease in hearing ability.
Earphone is not supplied.
Volume
High
High
Low
Low
File search
Recorder status
indicator
M : During playback
M
F
: During fast playback
M
S
: During slow playback
While the recorder is in
stop mode, press and
hold the STOP (z) but-
ton to display the [Time &
Date] and [Remain].
e Approximate le length
Playback
Playback
Playback
Playback
Press and hold
e
Recorded files are
grouped by date.
s
If the 0 or 9 button is pressed and held while the recorder is in playback
mode, the fi le advances with sound.
s
If the 0 or 9 button is pressed while the recorder is in stop mode, the
recorder moves to the beginning of the fi le.
s
Fast forwarding and rewinding are possible beyond the date.
Playback speed can be
changed to the following
settings: 0.5x, 0.75x, normal,
1.25x, and 1.5x.
The file is played back as it
was recorded.
When the NOISE CANCEL switch is set to [ON], playback
speed returns to normal playback.
Search for files
by the date they
were recorded.
s
When searching for a fi le recorded on October 15.
The date display
appears.
Select October 15. The first file is
played back.
If the file is skipped,
the recorder
switches to the
next file.


Product specificaties

Merk: Olympus
Categorie: Geluid
Model: DP-10

Heb je hulp nodig?

Als je hulp nodig hebt met Olympus DP-10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Geluid Olympus

Handleiding Geluid

Nieuwste handleidingen voor Geluid