Olivetti PG L2535 Handleiding


Bekijk gratis de handleiding van Olivetti PG L2535 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over Olivetti PG L2535 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
KIT COMPONENTS
99-6500
INSTALLATION
INSTRUCTIONS
TOOLS REQUIRED
Cutting tool
Socket wrench
Phillips screwdriver
KIT FEATURES
Shaft and
DIN unit
provisions
APPLICATIONS
CHRYSLER / DODGE / EAGLE / FORD / JEEP
LINCOLN / MERCURY / PLYMOUTH
VEHICLES 1974-00
(SEE INSIDE FOR SPECIFIC APPLICATIONS)
2-SHAFT HEAD UNITS: Slide the aftermarket head unit into the kit and secure with shaft
nuts. (see Fig. A)
DIN HEAD UNITS: Cut and remove the shaft supports from the Radio Housing. Slide the
DIN cage into the kit and secure by bending the metal locking tabs down. Slide the aftermarket
head unit into the cage until secure. (see Fig. B)
2
Fig. A
3
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with those screws
previously removed in the dash disassembly.
4
Fig. B
ALL VEHICLES
3
Radio Housing
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
rev. 230701

Beoordeel deze handleiding

4.2/5 (6 Beoordelingen)

Product specificaties

Merk: Olivetti
Categorie: Niet gecategoriseerd
Model: PG L2535

Heb je hulp nodig?

Als je hulp nodig hebt met Olivetti PG L2535 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden