Nutrichef PICEM25 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Nutrichef PICEM25 (5 pagina's) in de categorie Ijsblokjesmachine. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
1
Description
1. Silicon stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. View window
7. Back front cover
8. Control Panel
9. Water tray
10. Evaporator
11. Ice shovel
12. Ice basket
Function
Instant making ice
Ice full alarming deficient water alarming ,
Crystalline ice bullet warhead
9pcs of ice cube in 10mintues
Before/First Use of Your Ice Maker
1.During transportation the incline angle of the cabinet should not be over 45° .Do not turn the Ice maker ,
upside down. As this may damage the compressor and sealed system.
2.Remove all packing material and carefully check your ice maker to ensure it is in good condition and that
there is no damage to the ice maker or power cord and plug.
3.The Ice maker should be placed horizontally on a level surface.To ensure proper ventilation for your Ice
maker allow 150mm of space at the top the back and on each side. Do not install the Ice maker near an ,
oven radiator, , or any other heat source.
4. Before using the Ice maker for the first time please wait 2 hours after positioning it and keep the front lid , ,
open for at least 2hours
5. Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
6. Pure water is not allowed to be used on this unit spring water is recommended.,
2
Control Panel Operation
ON/OFF Press it to turn unit on or off : .
ADD WATER This light will come on with long noise ' ' noise. You will need to add water and press the : a DI
'STOP' then the 'START' button to restart the Ice maker.
ICE FULL This light will come on with ' ' noise when the ice has reached the maximum capacity of the a DI DI,
storage cabinet. Press ON/OFF button to restart the Ice maker after some of the ice has been taken away.
Operating Instructions
Step 1.
Open the lid and fill the water reservoir with water.
Note: Make sure the water level in the water reservoir is not over the Ice collecting tray.
Step 2 .
Connect to the power.
Step 3.
Press ON/OFF button to turn unit on. The ice maker begins to work.
Note: For the first three cycles the ice may be small and irregular in size. ,
Step 4
If indicator ADD WATER is red with 'DI' noise then take out the basket then add water as step 1 then , , per
press ON/OFF to restart the ice maker
Note: If no water is pumped up to the water tray over two cycles but the water in water tank is enough,
then please move the unit ahead a little then remove the silicon stopper, , and let several drops water
runs out.
Step 5
If indicator ICE FULL is in red with 'DI DI' noise please take out the ice with the scoop. ,
Note: When the ice collecting tray is full please remove the ice immediately, Do not allow
the ice collecting tray to overfill.
Step 6
Press /OFF button to stop the machine. ON


Product specificaties

Merk: Nutrichef
Categorie: Ijsblokjesmachine
Model: PICEM25

Heb je hulp nodig?

Als je hulp nodig hebt met Nutrichef PICEM25 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ijsblokjesmachine Nutrichef

Handleiding Ijsblokjesmachine

Nieuwste handleidingen voor Ijsblokjesmachine