NovoPro CDJ Dual Table Stand Handleiding
NovoPro
Fietsenrek
CDJ Dual Table Stand
Lees hieronder de 📖 handleiding in het Nederlandse voor NovoPro CDJ Dual Table Stand (2 pagina's) in de categorie Fietsenrek. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Step 7
Final and IMPORTANT adjustments:
Please ensure that you have selected
your preferred tray working angle, you
have the support mounts in the correct
place and have the foam EVA pads pro-
tecting your equipment.
Tighten all nuts, bolts and screws as
required.
Your Novopro CDJ dual stand is now
ready to be used.
Please remove your equipment from
the stand before making any adjustments
to the position of the trays.
d 2015.E&OE.
Please carefully unpack the
contents.
You will find the fixings and screws
inside the rectangular box, we
suggest you lay out the parts on a
suitable area so you have these
ready for the following steps.
Please locate one of the main
trays as shown.
Connecting the tray to the arm:
Whilst holding a nut inside the tray
arm, slide the bolt through the
hole and then tighten with the
supplied allen key.
Do this for the top and bottom
parts of the arm as shown.
Then push in the plastic end cap
onto the tray arm.
Adding the support mounts:
There are four L shaped metal brackets to hold your player in place.
You can select the most suitable position from the 8 available holes.
(larger CDJ style units use the outer hole positions)
These are attached using the smaller nuts and bolts within the package.
Please tighten these into position.
Attach the rectangular foam EVA protective pads to these brackets once
you have ensured they are in the correct position – this is important
so that you do not damage your equipment.
Attaching the main support pole:
Insert the OPEN END of the main
pole into the base – the plastic
capped end should be visible,
facing upwards.
Tighten the pole using a chrome
butterfly bolt.
Attach the round foam EVA protec-
tive pads to the underside of the
base plate.
Now attach the metal collar to the
main pole as shown and tighten to
the pole using a chrome butterfly
bolt.
Attaching the tray arm to the
metal collar:
You will find that inserting the
retaining pin bolt (that adjusts the
tray angle) will make this step
easier….
Position the tray arm and use the
nuts and bolts to secure to the me-
tal collar and then add the plastic
end cap – in the same way as STEP 2.
PLEASE REPEAT STEPS 1-6 FOR THE
SECOND TRAY.
Step 4
Step 6
Step 1
Step 2
Step 3
Step 5
Product specificaties
| Merk: | NovoPro |
| Categorie: | Fietsenrek |
| Model: | CDJ Dual Table Stand |
Heb je hulp nodig?
Als je hulp nodig hebt met NovoPro CDJ Dual Table Stand stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Fietsenrek NovoPro
18 Mei 2023
12 Maart 2023
26 Januari 2023
3 December 2022
Andere handleidingen NovoPro
18 Mei 2023
12 Maart 2023
26 Januari 2023
3 December 2022