Novation Supernova II Handleiding

Bekijk gratis de handleiding van Novation Supernova II (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.3 sterren uit 5 reviews. Heb je een vraag over Novation Supernova II of wil je andere gebruikers van dit product iets vragen? Stel een vraag

A Guide To Using The Supernova II Multitimbrally With A Sequencer

There is a template inside the Supernova - Performance A126 “Multi Ch 1 -8” which has been setup specially for easy multitimbral use.

This Performance has all available 8 Parts active, with Part 1 set to midi channel 1, Part 2 set to midi channel 2 ... Part 8 set to midi channel 8.

Performance A 126 should be selected when you wish to use more than 1 Part at a time on dierent midi channels.

The Supernova II needs to be set up to use this Performance eectively for the following reasons:

Attempting to assign a Program to a Part where the Part midi channel is identical to the Global Midi channel will result in the Supernova chang-

ing back into Program Mode. Hence It is important that the Global Midi channel inside the Supernova is changed from it’s default value of midi

channel 1 to any channel higher than channel 8 when using the Multitimbral Performance. Channels 9 and 16 are popular choices simply

because they are easy to remember.

When the Supernova II is used with a full midi loop such as with a sequencer, it is recommended that the Local Control is turned o. This will

ensure that the Supernova II does not recieve two messages corresponging to one change (ie a direct message from the front panel and one

via midi).

Performance A126 can be set to be the default patch the Supernova II shows when turned on. [the default patch is set when the Global Data is

written to memory].

Step By Step Operations:

1) select Performance A126 from the front panel of the Supernova.

2) Press the Global button to activate the global menu.

3) Page down to nd the Global Miidi channel page. Set this to a channel greater than 8 (9 is used throughout this example).

4) Page up to nd the page with Memory Protect and Local Control settings. Turn Memory Protect o.

5) Turn Local Control o.

6) Press the “write” button. The screen will show “save global set up with memory protect o?” You can change the default memory protect

status to “on” if you wish (the data encoder to the right of the screen toggles between on & o). Once the Memory Protect setting is set as

you wish press the “write” button once more.

7) Turn the Supernova o and then back on, notice that the Supernova now shows Performance A126 on the screen when it is rst turned

on.

PLEASE NOTE:When the local control is turned off, the Supernova will not respond to it’s

own front panel or keyboard Instead, every single button press or control tweakAT.A L L

will transmit a corresponding midi message which must be routed back into the Supernova

on an appropriate midi channel.

Product specificaties