Noise Engineering Soleo Vero Handleiding
Noise Engineering
Audio tuner
Soleo Vero
Bekijk gratis de handleiding van Noise Engineering Soleo Vero (4 pagina’s), behorend tot de categorie Audio tuner. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Noise Engineering Soleo Vero of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Overview
Soleo Vero is a 4HP stroboscope tuner for up to three oscillators. Patch directly through the SV to avoid
patching and repatching. Stroboscope allows tuning across a range of octaves on the y...and even without
audio monitoring. No more bumped oscillator surprises! Optional mode allows tuning to either the 440Hz
and 432Hz standards.
1
Noise Engineering
Soleo Vero
Patch-through stroboscope tuner
Type
Tuner
Size
4HP Eurorack
Depth
.8 Inches
Power
2x5 Eurorack
+12 mA
42 mA
-12 mA
5 mA
Etymology
Soleo -- from Latin solere: “to be accustomed to”
Vero -- from Latin vero: “without a doubt”
“I am in the habit of truth”
Soleo Vero tunes from the lowest A of 27.5 Hz to a highest A of 3520 Hz.
Tuning Range
Patch Tutorial
Patch the output of an oscillator into Input 1. Choose input 1 with the input
switch. Choose a note you’d like to tune to. Use your oscillator’s pitch control to
move to the octave you’d like to be in. When the pitch is close, the sharp at or
indicator LED will illuminate. Adjust the oscillator in the opposite direction and
continue to tune up or down until the strobe stops moving. Optional: plug the
output into a mixer to listen.
2
Interface
In: three inputs, each normaled horizontally across the module to its output.
Through: output
1/2/3 Switch: selects which input is being tuned.
Note: Chooses which note you wish to tune to. Tap once to see current setting.
Tap again to select another note. The selected note will be applied to all three
channels.
Octave: The green octave readout gives a quick indication of the octave of
oscillator’s pitch. Use to cross reference across channels.
Flat/Sharp: blue LEDs that illuminate when coarse tuning an oscillator to tell
you whether the oscillator is flat or sharp.
Stroboscope: The stroboscope portion of the display is the fine tuning readout.
As with other stroboscope tuners, when the display stabilizes, the input oscillator
is identical in pitch to the internal reference. As long as the strobe is stable or
moving very slowly, the input oscillator will be in tune.
Mode: To change between
Noise Engineering
Soleo Vero
Patch-through stroboscope tuner
3
Changing modes
Mode: To change between A=440Hz and A=432 Hz tuning standard modes, power cycle the SV
while pressing the Note button. The illuminated lights on the stroboscope at startup will indicate
the current mode
Noise Engineering
Soleo Vero
Patch-through stroboscope tuner
A=432Hz Mode A=440Hz Mode
Product specificaties
| Merk: | Noise Engineering |
| Categorie: | Audio tuner |
| Model: | Soleo Vero |
Heb je hulp nodig?
Als je hulp nodig hebt met Noise Engineering Soleo Vero stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Audio tuner Noise Engineering
18 Maart 2025
Handleiding Audio tuner
- Rotel
- Pro-Ject
- Electro Harmonix
- Harman Kardon
- Marantz
- Teac
- Vimar
- Arcam
- Apart
- Sony
- Crestron
- Sirius
- Pioneer
- Adastra
- Vincent
Nieuwste handleidingen voor Audio tuner
28 Maart 2025
29 Januari 2025
12 November 2024
4 April 2024
27 Februari 2024
22 Februari 2024
6 November 2023
8 Juli 2023
7 Juli 2023
4 Juli 2023