Nitecore HA20 Handleiding

Bekijk gratis de handleiding van Nitecore HA20 (2 pagina’s), behorend tot de categorie Zaklamp. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.0 sterren uit 4 reviews. Heb je een vraag over Nitecore HA20 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User Manual

Features

·Unibody die-cast, lightweight and rugged

·Dual-source headlamp with CREE XP-G2 LED and two F5 red LEDs

·Powered by two AA batteries for a maximum output up to 300 Lumens

·High efficiency circuit board provides up to 160 hours runtime

·Integrated “Precision Digital Optics Technology” provides extreme

reflector performance

·Five brightness levels and three concealed special modes to select

from

·Red LEDs provide constant/flashing illumination

·Displays battery voltage with red light (accurate to 0.1V)

·Features intelligent memory effect

·Innovative single button two-stage switch is remarkably user-friendly

(Chinese Patent: ZL201120062948.1)

·Tilting mechanism provides 90°vertical movement to eliminate

illumination blind zones

·A custom catoptrics-based system produces an extremely wide 100°

beam angle

·Featuring Advanced Temperature Regulation (ATR) technology to

dynamically adjust output performance according to its internal

temperature

·Comfortable chafe-free and breathable nylon headband

·Toughened ultra-clear mineral glass with anti-reflective coating

·Constructed from aero-grade aluminum alloy

·Waterproof in accordance with IP67

·Impact resistant to 1.5 meters

Dimensions

Size: 3.54” x 2.18” x 1.98” (90mm x 55.4mm x 50.4mm)

Head diameter: 0.94” (24mm)

Weight: 2.17oz (61.4g) (without battery)

Accessories

Spare O-ring

Battery Options

Output & Runtime

Note: Each time batteries are inserted, the red LEDs will blink to indicate

battery voltage. Please refer to the “Power Tips” section in this manual

for details.

Caution: DO NOT direct the beam towards human or animal eyes when

using HA20.

On/O Operations

To turn HA20 on: Press the switch all the way down until a “Click” is

heard;

To turn HA20 off: Press the switch all the way down again until a “Click”

is heard.

Brightness Levels

With HA20 turned on, press the switch partway down to cycle through

brightness levels: ultralow, low, medium, high-turbo. HA20 has memory

effect for brightness levels. Each time it is turned on, HA20 will enter the

brightness level last used.

Special Modes(Police Warning/Location

Beacon/SOS)

With HA20 turned on, press the switch all the way down for over one

second to enter police warning mode. Press the switch partway down to

cycle through location beacon-SOS-police warning modes. To exit, press

the switch all the way down to turn HA20 off.

Constant/Flashing Red Illumination

With the light turned off, press the switch partway down for over one

second to enter constant red illumination mode (7 hours and 25 minutes

runtime at 16 Lumens);

In red illumination mode, press the switch partway down to switch

between constant and flashlight red illumination. To exit, press the switch

all the way down to turn HA20 off.

Power Tips

Upon battery installation, the red LEDs will blink to indicate battery

voltage (accurate to 0.1V). For example, when battery voltage is 2.4V,

red LEDs blink twice, followed by a 1.5 second pause, and blink four

Thanks for purchasing NITECORE!

®

The All-Round Flashlight Expert

HA20

Operating Instructions

HA20 utilizes a two-stage switch to enable various operations based on

finger pressure.

Battery Installation

Insert two AA batteries with the positive (+) and negative (-) ends

corresponding to the diagram below. Align the cover .

TYPE

Nominal voltage

Compatible

Primary AA batteryAA1.5V Y (Recommended)

Rechargeable AA batteryAA1.2V Y (Recommended)

Primary AA Lithium batteryL91 1.5VY

NOTICE

The above data has been measured in accordance with the international

flashlight testing standards ANSI/NEMA FL1 using 2 x 1.2V 2400mAh AA

batteries under laboratory conditions. The data may vary slightly during

real-world use due to battery type, individual usage habits and

environmental factors.

TURBOHIGHMIDLOW ULTRALOW

LUMENS

300

LUMENS

160

LUMENS

90

LUMENS

30

LUMEN

1

1

h

45

min

2

h

30

min

5

h

45

min

17h 160h

110m

(Beam Distance)

1.5m

(Impact Resistant)

3050cd

(Peak Beam Intensity)

IP67

(

Dust & Water Resistant)

)

-

-

+

+

Product specificaties