Ninja BL480NZ Handleiding

Ninja Blender BL480NZ

Lees hieronder de 📖 handleiding in het Nederlandse voor Ninja BL480NZ (16 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
OWNER’S GUIDE
BL480NZ
2CU ST OM ER CARE - NZ : 08 00 0 02 9 99
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NUTRI NINJA™
WITH AUTO IQ™.
IMPORTANT:
This appliance is not intended for use by persons
with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children shall not use or play with this appliance.
Close supervision is necessary to keep appliance
and cord out of reach of children during use.
WARNING:
The blades are not afxed to the unit. They
are removable and very sharp. Handle with
care!
CAUTION:
ln order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance
must not be supplied through an external
switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by
the utility.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
2. DO NOT allow young children to operate the
appliance or use as a toy. Close supervision
is necessary when any appliance is used
nearchildren.
3. Never leave an appliance unattended when in
use.
4. Turn the appliance off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts,
accessing parts that move while in use and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
5. DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead, grasp
the plug and pull to disconnect.
6. DO NOT use with damaged cord or plug. Contact
Customer Service or Service Center for the
repair or replacement of the line cord.
7. DO NOT USE if the appliance is not working, has
been dropped, dropped into water, damaged or
left outdoors.
8. NO SERVICEABLE PARTS. Incorrect re-
assembly or repair can cause a risk of electrical
shock or injury to persons when the appliance
is used. Contact Customer Service or Service
Center for the repair or replacement under the
warranty agreement.
9. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
CU ST OM ER CARE - AU : 180 0 89 0 84 0 3
22. CAUTION: DO NOT PROCESS HOT FOODS
OR HOT LIQUIDS. Allow hot ingredients to cool
before processing.
23. Extreme caution must be used when moving an
appliance containing hot food, water or other
liquids.
24. DO NOT expose containers to extreme
temperature changes.
25. CAUTION: DO NOT process dry ingredients
without adding liquid to the cup. This
product is not intended for dry blending.
26. DO NOT overll. Do not exceed Max Fill line.
27. DO NOT operate the appliance empty.
28. If the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 30 minutes before using again.
29. To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
30. Max ON time is 1 minute under 1000W load. If
the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 30 minutes before using again.
31. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
32. Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
WARNING: Extension cords are not
recommended for use with this product.
10. DO NOT let the power cord hang over the edge
of table or counter or touch hot surfaces such as
the stove.
11. Always use the appliance on a dry, level surface.
12. Keep hands, hair, clothing, as well as utensils
out of container while processing or blending
to reduce the risk of severe injury to persons or
damage to the appliance. A scraper may be used
but only when the appliance is not running.
13. CAUTION: The blades are not afxed to the
unit. They are removable and extremely
sharp. When handling the blade assembly,
do not hold the blades but rather always
hold by the base of the blade assembly.
Blades are sharp. Handle carefully!
14. Avoid contact with moving parts.
15. DO NOT attempt to sharpen blades.
16. DO NOT use the appliance if blade assembly is
bent or damaged.
17. To reduce the risk of injury, never attempt to
place the Pro Extractor Blades
™ assembly onto
the motor base without rst assembling the
blade assembly to the Nutri Ninja
™ Cup.
18. DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
19. The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in re, electric shock or
personal injury.
20. DO NOT remove any container from the motor
base while the appliance is in operation. Always
unplug the unit when not in use.
21. To reduce the risk of injury, NEVER operate the
appliance without the blade assembly in place;
DO NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
SAVE THESE INSTRUCTIONS


Product specificaties

Merk: Ninja
Categorie: Blender
Model: BL480NZ

Heb je hulp nodig?

Als je hulp nodig hebt met Ninja BL480NZ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Ninja

Handleiding Blender

Nieuwste handleidingen voor Blender