Nilfisk SC100 Handleiding
Nilfisk
Niet gecategoriseerd
SC100
Bekijk gratis de handleiding van Nilfisk SC100 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 4.7 sterren uit 26.5 reviews. Heb je een vraag over Nilfisk SC100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Nilfisk A/S
Kornmarksvej 1
DK-2605 Broendby
DENMARK
Tel.: +45 43 23 40 50
Fax: +45 43 43 77 00
mail.com@nilfisk.com
www.nilfisk.com
(*) ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.
(**) THE MANUAL SUCTION HOSE IS INCLUDED ACCESSORY ONLY FOR THE FULL PACKAGE VERSION; FOR THE BASIC VERSION IS AN OPTION
Use and Maintenance
- SC100
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual.
14. Disconnect the power plug from
the electrical socket and rewind
the cable from the machine and
place it in the cable holder.
13. Park the machine in upright
position. If needed turn off the
machine by pressing the main
button. Press the main switch to
“0”.
11. The red LED blinks when the
machine is getting low on solution
and fixed light when empty. Empty
the recovery and refill the solution
tank to continue working.
12. To use the manual suction hose
press the main button to start the
machine in upright position. Turn
the hose connection to ON and use
the suction tube. When done press
the main button and turn hose
connection to OFF. (**)
15. Empty the recovery and solution
tank. Clean them with water.
19. Clean the squeegee bars and the
cylindrical brush with water.
17. Remove the squeegee bars. 18. Unscrew by turning the knob
clockwise to remove the cylindrical
brush.
20. Clean the machine using a damp
cloth and where needed use a
neutral cleaning product. Then
store the machine in a clean and
dry place.
16. Check and clean the solution
and vacuum filter regularly.
2. Fill the solution tank with a clean
water. The clean water temperature
must not exceed 40 °C.
3. The tank cap can be used for
dosing the detergent. One full cap
is 30ml giving 1% detergent of the
3L tank capacity. (*)
4. Connect the power plug to the
electrical socket.
1. Release the handle to remove the
tank assembly.
5. Turn on the machine with the
main switch to “I”.
9. Move the machine with the
handle and start cleaning the
floor.
10. For double scrubbing, use the
pedal to lift/lower squeegees.
6. Use the orange pedal to put the
machine in working position.
7. When machine is in working
position press the main button
and start cleaning. Machine will
automatically stop when parked
upright.
8. PPress one of the solution
buttons, according to the type of
cleaning to be performed:
1 drop - normal cleaning
2 drop - heavy duty cleaning
Nilfisk A/S
Kornmarksvej 1
DK-2605 Broendby
DENMARK
Tel.: +45 43 23 40 50
Fax: +45 43 43 77 00
mail.com@nilfisk.com
www.nilfisk.com
Troubleshooting
- SC100
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual.
1. Check if the cylindrical brush is
correctly installed and not worn out.
The machine
doesn’t work
as it should?
The suction
doesn’t work
as it should?
The machine
doesn’t clean
as it should?
The brush
doesn’t work
as it should?
1. Check if the power supply cable is
damaged, faulty or disconnected
from the electrical mains.
2. The main switch is broken. (*) 3. The push button panel is broken.
(*)
(*) For these causes the mainte-
nance procedure must be per-
formed by an authorised Nilfisk
Service Center.
For further information refer to the
Service Manual, available at any
Nilfisk Service Center.
1. Check if you have the right
detergent solution settings or the
solution tank is empty.
2. Check if the solution filter is dirty.
Clean it if needed.
3. Check if the holes in solution
dispensers are clogged. Remove
them and clean if needed.
1. Check if the recovery tank is full. 2. Check if the squeegee bars are
dirty or the blades are worn or
damaged.
3. Check if the inspection
compartment is dirty.
4. Check if the recovery vacuum
hose is disconnected or dirty.
Product specificaties
| Merk: | Nilfisk |
| Categorie: | Niet gecategoriseerd |
| Model: | SC100 |
Het water wordt niet meer opgezogen???
Dorie Hendriks - 8 Juni 2025Heb je hulp nodig?
Als je hulp nodig hebt met Nilfisk SC100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Nilfisk
7 December 2024
25 Maart 2024
28 November 2023
26 Augustus 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
8 Juli 2023
8 Juli 2023
Handleiding Niet gecategoriseerd
- Budda
- Carrier
- Anybus
- Brandson
- Futurelight
- T.I.P.
- Claypaky
- Korg
- Panduit
- Integra
- Oceanic
- Café
- Ibico
- Nobo
- Baja Mobility
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025