NeXtime 5202WI Handleiding

Bekijk gratis de handleiding van NeXtime 5202WI (2 pagina’s), behorend tot de categorie Klok. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over NeXtime 5202WI of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN

This alarm clock is working on:

2 x 1.5V(AA)

• Different types of batteries or new and used batteries

cannot be mixed.

• Batteries must be inserted with the correct polarity.

• Please remove exhausted batteries from the product.

• Batteries shall be disposed of in a safe way. Only dispose

batteries in specific collection containers (contact your

retailer for more information) in order to protect the

environment.

WARNING: Batteries shall not be exposed to excessive heat

such as sunshine, fire or the like.

1. Radio control (DCF)

2. 12/24Hr time display

3. Alarm with touch snooze

4. LED backlight (around 4 seconds)

5. Calendar (2000-2099)

6. Temperature display in °C/°F

7. Humidity Display

The Radio Control (RC) function will automatically start

and receive RC signal after you put battery into battery

compartment.

Please note that it will only work in the following time zone:

• DCF – Most parts of Europe

The clock automatically receives the RC signal daily to

check the current time, one time a day. If the RC signal is

scanned, the clock will stop to receive the signal until the

next day. It will capture the signal according to the following

schedule:

BATTERY

FUNCTIONS

RADIO CONTROL FUNCTION

DCF SUMMER: AM 3:02, AM 4:02, AM 5:02, AM 6:02

DCF WINTER: AM 2:02, AM 3:02, AM 4:02, AM 5:02

If you receive the signal, but you live in another Time Zone

than where the signal originates from, you can adjust the

time zone:

• Hold on “Tuner” for 2 seconds for turning on the setting

mode and go to set time zone first.

• Turn “Tuner” to adjust value

If you live a a zone where the signal cannot be found, the

clock will work normal by setting the time manually.

Please see the next page for the instructions how to do this.

It is possible to show different functions on the display, by

pressing the “Tuner” several times. It will go back to the

Default Mode (Time) after around 10 second, except when

selecting circular function (A circular symbol is shown on

top right corner ). When in Circular Mode, it continually

shows all modes.

1. Time Display(Default Mode)

2. Date Display

3. Weather Display

4. Alarm Display

5. Circular Display

1. Default of time is 00:00.00(24hr)

2. Default of Alarm is 00:00(24hr)

3. Default of Date is 1st Jan,2014

4. Default of interval of snooze is 5 minutes

5. Default of temperature unit is °C

6. Default time zone is 0

If there is no RC signal provided in your country/area, you

can set the time manually as below procedure.

CHANGING WORKING MODE

TIME SETTING

1. Press “Tuner” to select mode (among time display, date

display and circular display can go into setting mode)

2. Hold on “Tuner” for 2 seconds for turning on the setting

mode and go to set time zone first

3. Turn “Tuner” to adjust value

4. Press “Tuner” again to set hour

5. Turn “Tuner” to adjust value

6. Press “Tuner” again to set minute

7. Turn “Tuner” to adjust value

8. Press “Tuner” again to set mode of time display 12/24

9. Turn “Tuner” to change 12/24

10. Press “Tuner again to set year

11. Turn “Tuner” to adjust value

12 . Press “Tuner” again to set month

13 . Turn “Tuner” to adjust value

14 . Press “Tuner” again to set day

15 . Turn “Tuner” to adjust value

16 . Press “Tuner” again to set temperature unit

17 . Turn “Tuner” to change °C or °F

18 . Press “Tuner” again to exit setting mode

When you live in a country/area where the clock should

have signal, but the clock is unable to receive a good signal,

it can happen that the signal is disturbed by other signals.

For example dect phones or microwaves.

Another possibility is that the signal cannot reach the

clock because it is blocked by parts of the building.

For example a steel construction, or when the clock is inside

a basement. The signal is best received when the clock is

close to a window.

The clock has a special white LED backlight.

The light will stay on for about 5 seconds, after you touch

the top of the clock.

This touch button on top of the clock also functions as a

snooze button when the alarm is ringing.

SNOOZE/LIGHT

Product specificaties