Newstar NMPRO-C22 Handleiding

Newstar Flat panel steun NMPRO-C22

Lees hieronder de 📖 handleiding in het Nederlandse voor Newstar NMPRO-C22 (11 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11

NMPRO-C12

This instruction is applicable to all the following

models and related extended products

Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before

attempting to begin your installation.

This products should only be installed by someone who has a basic knowledge of building constructio

installations and fully undestnd these instrudtions.

Always have someone assit you to lift and position your equipment.

Tighten screws and bolts firmly, but do not over tighten. Over tightening can damage the item and greatly

reduce their ability to hold.Please refer to suggested torque values where applicable in these instructions.

(With fixed arms) (With fixed arms)

NMPRO-C22

NMPRO-C32 NMPRO-C33

X4 800mm*81000mm*2+480mm*4 X4X6X4 X4 X8 X2 X16

D4 D6D5D3 D9 D10 D11 D12D7 D8

X6 800mm*121000mm*6+480mm*2 X6X9X6 X4 X12 X3 X24

D4 D6D5D3 D9 D10 D11 D12D7 D8

Parts list (NMPRO-C12)

M5X15 M6X15 M8X15 Ø6XØ6.2X1.5

X4 X4 X4

X2 800mm*4680mm*2 X2X3X2 X4 X4 X1

D4 D6D5D3 D9 D10 D11D7 D8

A2 A3 A4

Ø16XØ8.2X1.5

X1 X1 X1

B1 B2 B3

6mm5mm M8X12

Open-

wrench

X8 X8 X8

B4 B5 B6

X3 X12 X1 X4 X6 X6

C1 C2 C3 C4 C5 C6

M8x70 M8x60 M8Ø6XØ8.2X1.5 Lag bolt Anchor

Parts list (NMPRO-C22)

M5X15 M6X15 M8X15 Ø6XØ6.2X1.5

X4 X4 X4 X4

A1 A2 A3 A4

X3 X12 X1 X4 X6 X6

C1 C2 C3 C4 C5 C6

M8x70 M8x60 M8Ø6XØ8.2X1.5 Lag bolt Anchor

Parts list (NMPRO-C32)

M5X15 M6X15 M8X15 Ø6XØ6.2X1.5

X4 X4 X4 X4

A1 A2 A3 A4

X3 X12 X1 X4 X6 X6

C1 C2 C3 C4 C5 C6

M8x70 M8x60 M8Ø6XØ8.2X1.5 Lag bolt Anchor

Ø16XØ8.2X1.5

X1 X1 X1

B1 B2 B3

6mm5mm 3mm M8X12

Open-

wrench

X16 X16 X16

B4 B5 B6

Ø16XØ8.2X1.5

X1 X1 X1

B1 B2 B3

6mm5mm 3mm M8X12

Open-

wrench

X24 X24 X24

B4 B5 B6

Product specificaties

Merk:	Newstar
Categorie:	Flat panel steun
Model:	NMPRO-C22
Kleur van het product:	Zwart
Breedte:	1970 mm
Diepte:	200 mm
Hoogte:	3250 mm
Breedte verpakking:	250 mm
Diepte verpakking:	240 mm
Hoogte verpakking:	1050 mm
In hoogte verstelbaar:	Ja
Montagewijze:	Plafond
Land van herkomst:	China
Maximale gewichtscapaciteit:	30 kg
Paneelmontage-interface:	100 x 100,600 x 400 mm
Netto gewicht kartonnen doos:	38000 g
Netto gewicht pakket:	38000 g
Montage interface compatibiliteit (min):	100 x 100 mm
Montage interface compatibiliteit (max):	600 x 400 mm
Aantal displays ondersteund:	4
Verbeterd kabelbeheer:	Ja
(Buitenste) hoofdverpakking hoogte:	1060 mm
(Buitenste) hoofdverpakking breedte:	250 mm
(Buitenste) hoofdverpakking brutogewicht:	38000 g
(Buitenste) hoofdverpakking lengte:	240 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Maximale schermgrootte:	55 "
Code geharmoniseerd systeem (HS):	HS940320809000
Producten per pallet (EU):	18 stuk(s)
Minimale schermgrootte:	32 "
Type hoogteverstelling:	Handmatig