Neutrik NE8MC6-MO Handleiding

Neutrik Niet gecategoriseerd NE8MC6-MO

Lees hieronder de 📖 handleiding in het Nederlandse voor Neutrik NE8MC6-MO (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

Slide the boot onto the cable.

Terminate RJ45 connector on the cable.

Press the locking latch of the RJ45 and place the

two adapters onto the RJ45.

Put chuck onto the cable.

Slide RJ45 and chuck together into the housing.

Finish the assembly by turning the bushing onto the

connector. Screw bushing fully up to the end.

Jacket:

See following pages.

onductors with an

insulation. O.D. 0.037” / 0.95 mm to 0.047” / 1.07 mm.

O.D. 0.22” / 5.5 mm to 0.25” / 6.5 mm

Pay attention: Hold the brackets together.

Pay attention to the plug latch which has to be on the

opposite side of the key.

Attention: Pay attention to the guiding key.

Suitable cables:

AWG 22 to 28 soldid or stranded c

Key

NEUTRIK AG

NEUTRIK Zürich AG

NEUTRIK USA Inc.

NEUTRIK UK Ltd.

( )

USA

T: F:

+423 / 237 24 24 +423 / 232 53 93

+41 44 / 736 5010 +41 44 / 736 5011

+1 732 / 901 9488 +1 732 / 901 9608

+44 1983 / 811441 +44 1983 / 811 439

NEUTRIK

NEUTRIK France

NEUTRIK Tokyo Ltd.

NEUTRIK

Vertriebs GmbH

Ltd.Hong Kong

DE / NL / AT

T: F:

+49 8131 / 280 890 +49 8131 / 280 830

+33 1 / 4131 6750 +33 1 / 4131 0511

+81 3 / 3663 4733 +81 3 / 3663 4796

+852 / 2687 6055 +852 / 2687 6052

www.neutrik.com

ASSEMBLY INSTRUCTION

NE8MC6 etherCON Cable Connector CAT 6

- 2 -

ASSEMBLY INSTRUCTION etherCON CAT 6

Terminate RJ45 connector on the cable.

Consider cable end termination usually straight - thru

cable acc. TIA 568A.

Assembly of wire, load bar and plug.

Strip outer jacket 20 mm long.

Separate pairs in bundles.

Straighten and separate into individual leads.

Organize leads into proper order and trim edge to be

even.

Wire lead ends shown organized and trimmed.

White-Green

Green

White-Orange

Blue

White-Blue

Orange

White-Brown

Brown

BDA 194 20.05.2010

ASSEMBLY INSTRUCTION etherCON CAT 6

- 3 -

Insert Load Bar and load Wires into open end.

Slide Load Bar into position against Jacket.

Trim leads so Jacket is 8.64 mm / 0.34” from edge.

Inser Wires and Load Bar into Plug and push ful forward.

Terminate Plug with Hand Terminator MOLEX #62202-

0500 or any other suitable crimp tool.

In the case of using shielded cable crimp shield to

connector.

8.64 mm

[0.34”]

BDA 194 20.05.2010

Product specificaties

Merk:	Neutrik
Categorie:	Niet gecategoriseerd
Model:	NE8MC6-MO
Kleur van het product:	Black, Bronze
Internationale veiligheidscode (IP):	IP65
Materiaal:	Polyamide, Zinc
Aantal per verpakking:	1 stuk(s)
Aansluiting(en):	RJ-45
Bedrijfstemperatuur (T-T):	-10 - 60 °C
AWG draad omvang:	22/28
Kabel standaard:	Cat6