Neutrik NBNC75BFH6 Handleiding

Neutrik Coax-kabel NBNC75BFH6

Bekijk gratis de handleiding van Neutrik NBNC75BFH6 (2 pagina’s), behorend tot de categorie Coax-kabel. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Neutrik NBNC75BFH6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
Slide the boot onto the cable
- Position the labeling to the cabelend
Slide the crimp ferrule onto the cable
Spread the braided shield
(It`s easily with the NEUTRIK
“SHIELD-SPREADING-TOOL”!)
Crimp the pin
- position the pin on the center conductor
- Crimp the pin with the tool
(For best crimping-results it is recommended to use the original
Neutrik crimp tool
- HXBNC with the corresponding insert
or hexcrimp acc. to IEC 803-W (SW 1.7)
or squarecrimp acc. to IEC 803-2 (SW 1.6)
- Pin can also be soldered (Optional)!
- Straighten the pin if misaligned.
Insert the cable into the connector body
Slide the crimp ferrule over the shield to the front
and push the cable to it`s end position until you
hear a snap noise.
Crimp the ferrule with the tool
(For best crimping-results it is recommended to use the
original Neutrik tool - HXBNC with the corresponding insert)
Snap the boot onto the connector body
Prepare cable as shown
- Use an adjustable coaxial cable stripper
®
A
A
B
C
D
D
E
EF
G
H
I
B
C
Pin flush to the insulator
Please note:
Position the connector body
Flush with the die face.
CRIMP
OPE RA
TION!
H
Don't damage the foil!
(if existing)
Boot
Crimp ferrule
X
Labeling
F
G
I
H
X
rearTWIST BNC 75Cable Connector -
Crimp version
|W
ASSEMBLY INSTRUCTION
Draft. Nr.: BDA 076Update:17.02.2012 / 3102M0771
I IData subject to change without prior notice. 2012 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
® ®
©
www.neutrik.com
Assembled Connector
[ ]
C: 4.16”
[ ]
B:5 .197”
[ ]
A: 12.473”
NEUTRIK AGLI T: F: +423 /23724 24 +423/232 53 93
NEUTRIKUSA Inc.USA T: F: +1704/972 3050 +1704 /438 9202
( )
NEUTRIKUK Ltd.UK T: +44 1983 / 811 441+44 1983 / 811 439 F:
NEUTRIK Vertriebs GmbHDE/ NL/ AT/DK T: F: +49 8131/ 280 890 +49 8131 / 280 830
NEUTRIK FranceFR T: F: +33 1 / 4131 6750+33 1 / 4131 0511
NEUTRIK Tokyo Ltd.JP T: F: +81 3 / 3663 4733+81 3 / 3663 4796
NEUTRIK Hong Kong Ltd.T: F: HK +852 / 2687 6055+852 / 2687 6052
R
R

Beoordeel deze handleiding

4.7/5 (3 Beoordelingen)

Product specificaties

Merk: Neutrik
Categorie: Coax-kabel
Model: NBNC75BFH6
Kleur van het product: Zwart, zilver
Certificering: IEC 60803, IEC 60352-2
Aantal per verpakking: 1 stuk(s)
Impedantie: 75 Ohm
Compatibele producten: Kansai 3C-5S, Proel HPC 820
Operating voltage: 50 V
Bedrijfstemperatuur (T-T): -30 - 85 °C
Aansluiting 1: BNC
Aansluiting 1 type: Mannelijk
Insulation Material: Polytetrafluoroethyleen (PTFE)
Aansluiting type: BNC
Insulatie weerstand: 5000 MΩ
Retentiekracht: 30 N

Heb je hulp nodig?

Als je hulp nodig hebt met Neutrik NBNC75BFH6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden