Netgear XAVB2101-100PES Handleiding

Bekijk gratis de handleiding van Netgear XAVB2101-100PES (2 pagina’s), behorend tot de categorie Powerline adapter. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.4 sterren uit 2 reviews. Heb je een vraag over Netgear XAVB2101-100PES of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Guide

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should be

treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or

registered trademarks of NETGEAR, Inc. in the United States and/or other countries.

Information is subject to change without notice.Other brand and product names are

trademarks or registered trademarks of their respective holders. ©2012 by NETGEAR, Inc.

All rights reserved.

May 2012

Item Description

Power LED•Solid green. The electrical power is on.

•Solid amber. The adapter is in power saving mode.

•. The adapter is in the process of Blinking green

setting up security.

•Off. There is no electrical power.

Powerline

LED

•. The adapter is connected to a Powerline Solid

network.

•Off. The adapter has not found any other compatible

Powerline devices using the same encryption key.

The Pick A Plug feature lets you pick the electrical

outlet with the strongest link rate, indicated by the

color displayed by the LED:

Green: Link

rate > 80 Mbps

(Best)

Amber: Link rate >

50 and < 80 Mbps

(Better)

Red: Link

rate < 50

Mbps (Good)

Powerline LED

Power LED

Ethernet LED

Reset

Security

Power LED is offMake sure that power is supplied to the electrical

outlet, and that the Powerline devices are not plugged

into an extension cord, power strip, or surge protector.

Power LED is

amber

Power saving mode occurs when the Ethernet LED is

off. This can occur when:

•The Ethernet cable is unplugged.

•The device connected through the Ethernet cable is

turned off.

•The adapter is idle for 10 minutes.

It returns to normal mode within 2 seconds once the

Ethernet link is up.

Powerline LED

is off

•If you have set network security, make sure that all

Power line devices are using the same encryption

key; see the online for details.User Manual

•Press the button on each device for 1 second Reset

to return the Powerline adapter to its factory default

settings.

Powerline LED

is amber or red

Move the Powerline device to a closer location.

Ethernet LED is

off

•Make sure that the Ethernet cables are working and

securely plugged into the devices.

•Press the button on each device for 1 second Reset

to return the Powerline adapter to its factory default

settings.

Warning: Do not press the button on the Powerline Security

adapter until installation is complete and the adapters are

communicating with each other (indicated by the blinking

Powerline LED). Pressing this button too soon can temporarily

disable Powerline communication. If this should occur, use the

Factory Reset button to return the Powerline adapter to its

factory default settings.

Ethernet

LED

•. The Ethernet port is linked.Solid

•. There is no Ethernet connection.Off

Factory

Reset

Press the button for 1 second, then release it to Reset

return the Powerline adapter to its factory default set-

tings.

Security

Button

After you plug in your new AV adapter, press the

Security button for 2 seconds, then press the security

button on one of the other AV adapters in your exist-

ing network for 2 seconds. Both buttons must be

pressed within 2 minutes.

Note: The Security button does not work in power

saving mode (see “Power LED is amber” in the Trouble-

shooting Tips table).

Item Description

Powerline 200

Nano Adapters

Ethernet cablesIn some regions,

a Resource CD is

included with your

product.

Product specificaties