Netgear XAVB1201 Handleiding

Bekijk gratis de handleiding van Netgear XAVB1201 (2 pagina’s), behorend tot de categorie Powerline adapter. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.3 sterren uit 9 reviews. Heb je een vraag over Netgear XAVB1201 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

NETGEAR, the NETGEAR logo, and Connect

with Innovation are trademarks and/or

registered trademarks of NETGEAR, Inc. and/

or its subsidiaries in the United States and/or

other countries. Information is subject to

change without notice. © NETGEAR, Inc. All

rights reserved.

For indoor use only. Valid for sale in all EU

member states, EFTA states, and Switzerland.

March 2013

Installation Guide

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

LED and Button Descriptions

Item Description

Power LED•Solid green. The electrical power is on.

•Solid amber. The adapter is in power saving

mode. Power saving mode is disabled by default.

•Blinking green. The adapter is in the process of

setting up security.

•Off. There is no electrical power.

Ethernet

LED

•Solid. The adapter is connected through the

Ethernet port to a powered-on Ethernet device.

•Off. There is no Ethernet connection.

Powerline LED

Power LED

Ethernet LED

Factory Reset button

Security button

Powerline 100 (2-pack) XAVB1201

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the

label of your product and use it to register your product at

https://my.netgear.com.

You must register your product before you can use NETGEAR

telephone support. NETGEAR recommends registering your

product through the NETGEAR website.

For product updates and web support, visit

http://support.netgear.com.

NETGEAR recommends that you use only the official

NETGEAR support resources.

You can get the user manual online at 

http://downloadcenter.netgear.com or through a link in the

product’s user interface.

For the current EU Declaration of Conformity, visit 

http://support.netgear.com/app/answers/detail/a_id/11621/.

Package Contents

WARNING: Do not press the Security button on the Powerline

adapter until installation is complete and the adapters are

communicating with each other (indicated by the blinking Powerline

LED). Pressing this button too soon can temporarily disable Powerline

communication. If Powerline communication is disabled, use the

Factory Reset button to return the Powerline adapter to its factory

default settings.

Powerline

LED

•Solid. The adapter is connected to a Powerline

network.

•Off. The adapter has not found any other

compatible Powerline devices using the same

encryption key.

The Pick A Plug feature lets you pick the electrical

outlet with the fastest link rate, indicated by the color

of the LED.

Green: Link

rate > 80 Mbps

(Fast)

Amber: Link rate >

50 and < 80 Mbps 

(Medium)

Red: Link

rate < 50

Mbps (Slow)

Factory

Reset

Press the Reset button for 1 second, then release it

to return the Powerline adapter to its factory default

settings.

Security

Button

After you plug in your new adapter, press the

Security button for 2 seconds, then press the

Security button on one of the other adapters in your

existing network for 2 seconds. Both buttons must be

pressed within 2 minutes.

To enable power saving mode, press and hold the

Securitybutton for 10 seconds or more, then release

it. Pressing the Security button again powers the

adapter back on.

Item Description

Ethernet Cables

Powerline 100

Mini Adapters

Product specificaties