Netgear PS101 Handleiding
Netgear
Printserver
PS101
Lees hieronder de đź“– handleiding in het Nederlandse voor Netgear PS101 (16 pagina's) in de categorie Printserver. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
Installation Guide
Mini Print Ser ver
MODEL PS101
Technical Support
YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN
PROOF OF PURCHASE AND THE WARRANTY INFORMATION.
To register your product, get product support or obtain product information and product
documentation, go to http://www.NETGEAR.com/register.
You will find technical support information at http://www.NETGEAR.com through the
Customer Support area. If you want to contact technical support by telephone, see the support
information card for the correct telephone number for your country.
Technical support is available 24 hours a day, 7 days a week.
NETGEAR, INC.
E-mail: support@NETGEAR.com
www.NETGEAR.com
©2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and AutoUplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or
other countries. Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
Introduction
Thank you for purchasing a NETGEAR PS101
Mini Print Server. With this print server you can
share your printer with all the computers in your
home or office that run Microsoft® Windows®
95 OSR2, 98, 2000, NT 4.x, Me, or XP
operating system.
This installation guide shows you how to connect
the print server to your printer and configure it to
use with your computers. Setup is easy – if you
follow the instructions in this guide, the print server
will soon be up and running for your computers.
If you have problems, there is a troubleshooting section on page 9 to help you. You can get
more detailed troubleshooting information from the Reference Manual on the CD or online at
www.NETGEAR.com in our Support section.
Installation Procedure Overview
Estimated time: 30 minutes
1. Unpack the box and verify the contents.
2. Connect the print server to the printer and to the network.
3. Configure the print server to be recognized on the network.
4. Configure each computer to print through the print server.
Note: You only need to go through procedures 1 through 3 once. Repeat procedure
4 for each computer that will share the printer with the print server. It takes less
than 5 minutes to configure and test each computer.
On the CD, you will find a containing more detailedPS101 Resource Reference Manual
information about installation, troubleshooting and configuration.
1
Product specificaties
| Merk: | Netgear |
| Categorie: | Printserver |
| Model: | PS101 |
Heb je hulp nodig?
Als je hulp nodig hebt met Netgear PS101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printserver Netgear
8 Mei 2023
12 April 2023
24 Maart 2023
16 Februari 2023
Handleiding Printserver
- Printserver HP
- Printserver Airlive
- Printserver D-Link
- Printserver Digitus
- Printserver Edimax
- Printserver Gembird
- Printserver LevelOne
- Printserver Lexmark
- Printserver Sitecom
- Printserver Star
- Printserver TP Link
- Printserver Trendnet
- Printserver Hamlet
- Printserver Intellinet
- Printserver Silex
- Printserver Lindy
- Printserver IOGEAR
- Printserver Hawking Technologies
- Printserver SEH
- Printserver StarTech.com
- Printserver Inter-Tech
- Printserver EXSYS
- Printserver Atlantis Land
- Printserver Lantronix
Nieuwste handleidingen voor Printserver
13 Maart 2024
13 Maart 2024
12 Maart 2024
5 Maart 2024
31 Januari 2024
31 Januari 2024
11 September 2023
11 September 2023
28 Augustus 2023
19 Augustus 2023