Netgear POE101 Handleiding
Netgear
Niet gecategoriseerd
POE101
Bekijk gratis de handleiding van Netgear POE101 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 62 mensen en kreeg gemiddeld 4.9 sterren uit 31.5 reviews. Heb je een vraag over Netgear POE101 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
POE101
Power Over Ethernet Adapters
Installation Guide
Introduction
NETGEAR POE101 Power over Ethernet adapters are designed to supply operational power to
devices through an Ethernet cable. These adapters make it easy to extend reach of your wireless
local network. The POE101 provides an ideal solution for locating an access point in a building
ceiling or attic, for example, where it has optimal radio coverage without requiring an AC
power outlet. The POE101 can extend the placement of a wireless access point up to 328 feet
(100 meters)1by using standard category 5 Ethernet cable.
Important
You should never connect a POE101 base unit LAN OUT to any network devices, such as
hubs, switches, and network interface cards (NIC). Doing so may damage the hub, switch,
NIC device, or even your computer. NETGEAR holds no responsibility for any loss from using
this product. PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE USING
THE NETGEAR POE101 PRODUCT. Using this product means that you agree with this
disclaimer. Damage to the product due to disregarding instructions in this guide will void the
warranty.
POE101 Base unit POE101 Terminal unit
1 This is a limitation of the Fast Ethernet specification. The total network length is added up from the connection of
the Ethernet switch to base unit, base unit to the terminal unit, and the terminal unit to an access point.
Package contents
• Power over Ethernet base unit
• Power over Ethernet terminal unit
• Localized AC power cable
• 100~240 V AC to 24V DC 30W power adapter
• Two 2-foot DC power cables
• 2-foot Ethernet cable
• Wall mount kit
• Installation Guide
• Warranty and support information cards
Setup Requirements
• Two straight through Category 5 Ethernet cables:
• a short cable from an Ethernet hub or switch to the POE101 base unit and
• a second cable (up to 328 feet) for connecting from base unit to a terminal unit.
These cables are not included in the NETGEAR POE101 packaging.
• A 5V DC powered NETGEAR access point2.
POE101 installation guide,
support information card &
warranty/registration card
Category 5
100 Mbps
Ethernet cable
110v cord
Power adapter
DC Power cables
POE101Base unit POE101 Terminal unit
Wall mount kit
1
1
2 One set of POE101 adapters per access point is required.
Product specificaties
| Merk: | Netgear |
| Categorie: | Niet gecategoriseerd |
| Model: | POE101 |
Heb je hulp nodig?
Als je hulp nodig hebt met Netgear POE101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Netgear
15 Juni 2025
15 Juni 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
26 Maart 2025
24 December 2024
30 September 2024
26 September 2024
Handleiding Niet gecategoriseerd
- Aviom
- Rode
- Stäubli
- Sonnet
- Alto
- JL Cooper
- EnOcean
- Kelty
- CEEM
- Lorex
- Silhouette
- Profizelt24
- Integral LED
- Bearware
- Crestron
Nieuwste handleidingen voor Niet gecategoriseerd
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025