Netgear Nighthawk RS400 Handleiding

Netgear Router Nighthawk RS400

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear Nighthawk RS400 (11 pagina's) in de categorie Router. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

12 V Laser Temp-Gun™ Thermometers

Thermomètre laser Temp-Gun™ de 12 V

Termómetros láser Temp-Gun™ de 12 V

Cat. No.

No de Cat.

2276-20

2277-20

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S

MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN

COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL

MANUAL DEL OPERADOR.

LOG

MODE

SET

12V LASER TEMP-GUN

AVOID EXPOSURE

LASER RADIATION

IS EM ITTED FROM THIS APERTUR E

LASER R ADIATION - DO NOT STARE INTO BEAM

MAXIMUM POWER < 1m W WAVE LENGTH 630-670 nm

CLASS II LASER PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11

C A UT IO N

CAT. NO . 2276-20

MADE IN CHINA

READ

OPERATORS

MANUAL

IMPORTANT SAFETY INSTRUCTIONS

WARNING READ ALL SAFETY WARNINGS AND INSTRUCTIONS. Failure to

follow the warnings and instructions may result in electric shock, ﬁ re and/or serious injury.

Save these instructions - This operator’s manual contains important safety and operating

instructions for MILWAUKEE Laser Temp-Gun™ Thermometers. Before using the Temp-Gun™,

read this operator’s manual, your battery pack and charger operator’s manual, and all labels

on the battery pack, charger and Temp-Gun™.

FUNCTIONAL DESCRIPTION

PERSONAL SAFETY

LASER SAFETY

WORK AREA SAFETY

• Laser light - Do not stare into beam or view

directly with optical instruments. Do not point

laser light at others. Laser light can cause eye

damage.

• Avoid exposure to laser radiation. Laser may

emit hazardous radiation.

• Do not point laser at reﬂ ective surfaces. Un-

predictable results may occur.

• Keep children and bystanders away while

operating Temp-Gun™. Store idle Temp-Gun™

out of the reach of children and do not allow

persons unfamiliar with the tool or these in-

structions to operate them.

• Avoid dangerous environments. Do not use in

rain, snow, damp or wet locations. Do not use in

the presence of explosive atmospheres (gaseous

fumes, dust or ﬂ ammable materials) because

sparks may be generated when inserting or re-

moving battery pack, possibly causing ﬁ re.

• Stay alert, watch what you are doing and use

common sense when operating Temp-Gun™.

Do not use while you are tired or under the

inﬂ uence of drugs, alcohol or medication.

A moment of inattention may result in serious

personal injury.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

in unexpected situations.

BATTERY USE AND CARE

• Under abusive conditions, liquid may be

ejected from the battery, avoid contact. If

contact accidentally occurs, ﬂ ush with water. If

liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause

irritation or burns.

SERVICE

• Have your Temp-Gun™ serviced by a qualiﬁ ed

repair person using only identical replacement

parts. This will ensure that the safety of the tool

is maintained.

• Do not disassemble. Incorrect reassembly may

result in the risk of electric shock or ﬁ re. If it is dam-

aged, take it to a MILWAUKEE service facility.

• Store in a cool, dry place. Do not store where

temperatures may exceed 120°F (50°C) such as

in direct sunlight, a vehicle or metal building during

the summer.

• Do not remove or deface labels. Maintain

labels and nameplates. These carry important

information. If unreadable or missing, contact

a MILWAUK E E service facility for a free

replacement.

• Recharge only with the charger speciﬁ ed by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of ﬁ re

when used with another battery pack.

• Use power tools only with speciﬁ cally desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and ﬁ re.

• When battery pack is not in use, keep it away

from other metal objects like paper clips,

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another. Shorting the battery termi-

nals together may cause burns or a ﬁ re.

1. Display

2. K-Type thermocouple input

3. Key pad

4. Lock-on button

5. Nameplate

6. Laser window

Speciﬁ cations

Laser Type: Class II

Max Power: <1mW

Wavelength: 630-670 nm

IR Temperature range: -30°C to 800°C (-22°F to 1472°F)

IR Accuracy: -30°C to 0°C (-22°F to 32°F): ±1.5°C (3°F) +0.1/1°C or F

0°C to 120°C (32°F to 248°F): ±1.0°C (2°F) +0.1/1°C or F

120°C to 380°C (248°F to 716°F): ±1.5°C (3°F) or 1.5% of reading, whichever is greater

380°C to 800°C (716°F to 1472°F): ±2°C (4°F) or 2% of reading, whichever is greater

Min. measuring distance: 2” < 50°C (122°F), 4” > 50°C (122°F)

Display resolution: 0.1°C/°F Primary and Secondary

Contact temp range: -40°C to 550°C (-40°F to 1022°F)

Contact temp input accuracy: ±1.1°C, ±2°F

Contact temp display resolution: 0.1°C/°F

K-Type Probe temp range: -40°C to 260°C (-40°F to 500°F)

K-Type Probe temp input accuracy: < 400°C ±2.5°C (< 752°F ±5°F)

Emissivity: Pre-set 0.95 (can be manually set)

RH Display (2277-20 only): 10%-90%

RH Accuracy (2277-20 only): ±5%

Response time: <500 msec

Drop: 1.5 meter

Log spaces: 20

Spectral response: 8 to 14 microns thermopile detector

Distance to spot: 40 to 1

Repeatability: ±0.5% OR ±1°C (±2°F) (whichever is greater)

Operating temperature: 0°C to 50°C (32°F to120°F)

Storage temperature: -20°C to 60°C (-4°F to 140°F) without battery

Relative humidity: 10 to 90% RH non-condensing at <30°C (<86°F) ambient

Voltage: 12 DC

Battery run time: Greater than 12 hrs with all functions

LOG

MODE

SET

13. Log

14. Settings

15. Backlight on/off

16. Arrow down

7. Infrared sensor

8. LED Floodlight

9. Trigger

10. Battery pack

11. Alarm on/off

12. Arrow up

17. Operation modes

18. Battery life indicator

19. Laser active indicator

20. Emissivity active indicator

21. Alarm indicator

22. Hold indicator

23. C° or F° indicator

24. Primary measurement

25. Humidity indicator

26. Trigger lock indicator

27. Secondary measurement

28. Log indicator

29. Emissivity value

Federal Communications Commission

WARNING: Changes or modiﬁ cations to this unit not ex-

pressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

12V LASER TEMP-GUN

AVOID EXPOSURE

LASER RADIATION

IS EMITTED FROM THIS APERTURE

LASER RADIATION - DO NOT STARE INTO BEAM

MAXIMUM POWER < 1mW WAVE LENGTH 630-670 nm

CLASS II LASER PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11

C AU T IO N

CAT. NO. 2277-20

MADE IN CHINA

READ

OPERATORS

MANUAL

Selecting MODES

Press the MODE button to display one of the fol-

lowing:

Average Temperature (AVG)

During a temperature reading,

the average temperature read

during the scan is displayed.

Maximum Temperature (MAX)

During a temperature reading,

the highest temperature read

during the scan is displayed.

Minimum Temperature (MIN)

During a temperature reading,

the lowest temperature read

during the scan is displayed.

Humidity (HUM)-2277-20 only

During a temperature reading,

the relative humidity (RH%) read

during the scan is displayed.

The relative humidity is taken at

the meter, not at the point of the

temperature reading.

Dew Point Temperature

(DEW)

During a temperature reading,

the dew point read during the

scan is displayed. The dew

point is taken at the meter, not

at the point of the temperature

reading.

OPERATION

WARNING Always remove battery

pack before changing or removing acces-

sories. Only use accessories specifically

recommended for this tool. Others may be

hazardous.

Scanning Object IR Temperature

1. Pull and hold the trigger for at least 2 seconds

and scan the surface temperature of an object.

A laser pointer indicates the center of the circular

area being scanned.

NOTE: The object should be larger than the spot

being scanned. If not, readings will be affected.

See Distance To Spot for necessary object size.

Distance to Spot 40:1

At 120" (10') away,

spot is 3" in diameter

At 80" away,

spot is 2" in diameter

At 40" away,

spot is 1" in diameter

—— Center of Spot

– – – Laser pointer (approx. 3/4" above center of spot)

Spot size at distance indicated

2. As you continue to hold

the trigger, the icon is

displayed along with the sur-

face temperature (primary

measurement) along with

any selected mode readings

(secondary measurement).

3. Release the trigger. HOLD

is displayed until the screen

shuts off in about seven sec-

onds.

NOTE: A quick change in tem-

perature affects the unit’s read-

ings. Allow unit to reach ambient

temperature before use.

ASSEMBLY

WARNING Recharge only with the

charger speciﬁ ed for the battery. For speciﬁ c

charging instructions, read the operator’s

manual supplied with your charger and

battery.

Inserting/Removing the Battery

To remove the battery, push in the release buttons

and pull the battery pack away from the tool.

To insert the battery, slide the pack into the body of

the tool. Make sure it latches securely into place.

Symbology

Volts Direct Current

CAUTION Laser Light - Do Not

Stare Into Beam

Laser product

Avoid Exposure: Laser Radiation Is

Emitted From This Aperture

To reduce the risk of injury, user must

read operator’s manual.

WARNING Never connect the Tem-

perature Probe to an energized circuit.

Contact Temperature Measurement with K-Type

Probe

Only use K-type Temperature Probes with this

meter.

1. Insert the probe. The unit

detects a connection of a K-

type probe and displays the

contact temperature (CON)

as the secondary measure-

ment.

2 The display will continue

to update the contact tem-

perature (CON) while the

temperature probe reaches

thermal equilibrium with the

object being measured. The

display will shut off after

about 20 minutes.

3. To take an IR reading while

using the K-type probe, pull

the trigger. The IR reading is displayed as the

primary measurement.

4 If set, the alarm will alert for the contact tem-

perature when the sensor probe is installed.

Product specificaties

Merk:	Netgear
Categorie:	Router
Model:	Nighthawk RS400
Kleur van het product:	Zwart
Gewicht:	750 g
Breedte:	285 mm
Diepte:	184.5 mm
Hoogte:	50 mm
Gewicht verpakking:	1450 g
Breedte verpakking:	256 mm
Diepte verpakking:	348 mm
Hoogte verpakking:	79 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Stroom
Aan/uitschakelaar:	Ja
Frequentie van processor:	1 MHz
Aantal processorkernen:	2
Wi-Fi-standaarden:	802.11a,802.11b,802.11g,Wi-Fi 4 (802.11n),Wi-Fi 5 (802.11ac)
USB-poort:	Ja
Ethernet LAN:	Ja
Type stroombron:	DC
Meegeleverde kabels:	DC,LAN (RJ-45)
Inclusief AC-adapter:	Ja
Indicatielampje:	Ja
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	4
Aansluiting voor netstroomadapter:	Ja
Intern geheugen:	256 MB
Type processor:	Ja
Geheugenkaart slot(s):	Ja
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Wifi-standaard:	Wi-Fi 5 (802.11ac)
WLAN gegevensoverdrachtsnelheid (max):	1625 Mbit/s
WLAN gegevensoverdrachtsnelheid (eerste band):	600 Mbit/s
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Antennas quantity:	3
Ondersteunt Windows:	Windows 10,Windows 2000,Windows 7,Windows 8,Windows Vista,Windows XP
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	1
Ondersteunt Mac-besturingssysteem:	Ja
Reset button:	Ja
Ethernet WAN:	Ja
Ondersteunt Linux:	Ja
DoS aanval preventie:	Ja
Snelle installatiehandleiding:	Ja
Flash memory:	128 MB
Ondersteunde browser:	Internet Explorer, Microsoft Edge, Google Chrome, Firefox, Safari
Hoog vermogen:	Ja
(Buitenste) hoofdverpakking hoogte:	298 mm
(Buitenste) hoofdverpakking breedte:	190 mm
(Buitenste) hoofdverpakking brutogewicht:	380 g
(Buitenste) hoofdverpakking lengte:	380 mm
Type WAN-aansluiting:	RJ-45
Type product:	Router om neer te zetten
Aantal producten inbegrepen:	1 stuk(s)
VPN eigenschappen:	Secure access to your home network away from home
Antenne-ontwerp:	Extern
NAT functionality:	Double firewall protection (SPI and NAT)
Stateful Packet Inspection (SPI):	Ja