Netgear GS752TPP Handleiding

Netgear Schakelaar GS752TPP

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear GS752TPP (115 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/115

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

September 2021

202-12021-06

User Manual

24-Port and 48-Port Gigabit Ethernet PoE+

Smart Switches with 4 SFP Ports

GS728TPv2

GS728TPPv2

GS752TPv2

GS752TPP

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports

User Manual2

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads.

You can also check out our NETGEAR Community for helpful advice at community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à

https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at

https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR's Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of

purchase within your return period.

Do not use this device outdoors. For products that support Power over Ethernet (PoE), the PoE source is intended

for intra building connection only.

Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil

platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while

flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or

communications with unmanned aircraft systems.

This switch is designed for indoor use only. If you want to connect to a device located outdoors, the outdoor device

must be properly grounded and surge protected, and you must install an Ethernet surge protector inline between

the switch and the outdoor device. Failure to do so can damage the switch.

WARNING: Before connecting this switch to outdoor cables or devices, see https://kb.netgear.com/000057103 for

safety and warranty information.

Trademarks

trademarks are used for reference purposes only.

Revision History

Publication

Part Number

Publish Date Comments

202-12021-06 September 2021 We removed “Managed Pro” from the product name.

202-12021-05 August 2021 We changed Configure the CoS settings for an interface on page 301.

202-12021-04 April 2021 • We changed Chapter 1, Get Started to document the following:

- The new device UI login options for initial access to the device UI. (HTTP

rather than HTTPS is now the default protocol for access to the device UI.)

See Access the switch on-network and connected to the Internet, Access

the switch off-network and not connected to the Internet, and

Credentials for the device UI.

- The new options to register the switch to activate your warranty. See

- The new requirements to change the management mode. See

Change the

management mode of the switch.

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports

User Manual3

(continued)

202-12021-04

(continued)

April 2021

(continued)

• We changed the login steps in all tasks in the manual to document the new

device UI login options.

• We changed Manage the Smart Control Center.

• We added Browser security warning with HTTPS access.

• We changed Reset the switch to factory default settings and reset the

registration status.

• We made multiple minor changes, including changes in terminology.

202-12021-03 March 2020 • We changed Reboot the switch.

• We changed Reset the switch to its factory default settings and added the

following sections:

- Reset the switch to factory default settings but maintain the registration

status.

- Reset the switch to factory default settings and reset the registration

status.

202-12021-02 February 2020 • We changed the login procedures for all tasks, including the tasks for initial

access in Chapter 1, Get Started. After you register and access the switch

with your NETGEAR account, you now can access the switch with the

device admin password. You now can also obtain and use a registration key

for oine access.

• We changed Credentials for the device UI.

• We changed Register the switch and added two sections:

- Register the switch with your NETGEAR account and access the switch

online

- Register the switch with your NETGEAR account and get a registration

key for offline access

• We changed Reset the switch to its factory default settings.

• We added Use an HTTP session to download and install an SSL security

certificate file on the switch.

• We changed local browser interface to device UI.

202-12021-01 August 2019 • We changed the login procedures for all tasks. After you register and access

the switch with your NETGEAR account, you can now access the switch with

the device admin password.

• The switch now supports management through the NETGEAR Insight app

and Insight Cloud portal.

• We reorganized the information in Chapter 1, Get Started and added or

revised the following sections:

- Available publications

- Switch management options and default management mode

- About on-network and off-network access

- Access the switch on-network and connected to the Internet

- Access the switch off-network and not connected to the Internet

- Credentials for the device UI

- Register the switch

- Change the language of the device UI

- Change the management mode of the switch

- PoE Max LED in the Device View

- LED Mode LED in the Device View

Product specificaties

Merk:	Netgear
Categorie:	Schakelaar
Model:	GS752TPP
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Gebruiksaanwijzing:	Ja
Frequentie van processor:	700 MHz
Vormfactor:	1U
Snelstartgids:	Ja
Aantal USB 2.0-poorten:	1
Certificering:	CE mark, commercial, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI
Intern geheugen:	128 MB
Type processor:	Ja
Aantal ventilatoren:	3 ventilator(en)
Web-gebaseerd management:	Ja
Rack-montage:	Ja
Flash memory:	32 MB
VLAN=ondersteuning:	Ja
Power over Ethernet (PoE):	Ja
Switchingcapaciteit:	104 Gbit/s
MAC-adrestabel:	16000 entries
10G support:	Nee
Aantal VLANs:	256
Switch type:	Managed
Multicast-ondersteuning:	Ja
Aantal basis-switching RJ-45 Ethernet-poorten:	48
Switch-laag:	L2/L3/L4
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Packet buffergeheugen:	1.5 MB
Latentie (1 Gbps):	3.35 µs
Totaal Power over Ethernet (PoE)-budget:	760 W
Aantal Power over Ethernet plus (PoE +)-poorten:	48
Aantal geïnstalleerde SFP modules:	4
Rekbevestigingspakket:	Ja
Multicast MAC adrestabel:	512 entries
Statische route:	Ja
Regels voor toegangscontrolelijst (ACL):	100