Netgear GS316v3 Handleiding

Bekijk gratis de handleiding van Netgear GS316v3 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over Netgear GS316v3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

16-port Gigabit Ethernet Unmanaged Switch

Model GS316v3

•NETGEAR 16-port Gigabit Ethernet Unmanaged Switch Model GS316v3

•Power adapter

•Wall-mount installation kit

•Rubber feet

•Installation Guide

Package contents

2. Connect the switch

November 2022

3. Connect to power

This switch is designed for indoor use only. If you want to connect it to a device located

outdoors, the outdoor device must be properly grounded and surge protected, and you

must install an Ethernet surge protector inline between the switch and the outdoor device.

Failure to do so can damage the switch.

WARNING: Before connecting this switch to outdoor cables or devices, see

https://kb.netgear.com/000057103 for safety and warranty information.

1. Register the switch

1. From a computer or mobile device that is connected to the Internet, visit

my.netgear.com.

2. Log in to your NETGEAR account.

NOTE: If you don’t have a free NETGEAR account, you can create one.

The Your Registered Products page displays.

3. Click the REGISTER NEW PRODUCT button.

4. In the SERIAL NUMBER eld,typetheserialnumberofyourswitch.

The serial number is 13 digits long. It is printed on the switch label.

5. From the PURCHASE DATE menus, select the date that you purchased the switch.

6. Click the button.REGISTER

Your switch is registered to your NETGEAR account.

AconrmationemailissenttoyourNETGEARaccountemailaddress.

Sample connections

Desktop

IP camera

Smart TV

LaptopServer

Printer

WAX214v2 AP

Desktop

GS316v3 switch

Router

Internet

4. Check the LEDs

When you connect the power adapter to the switch and plug the cable into an electrical

outlet, the LEDs indicate the status:

LEDDescription

Power LED

Solid green: The switch is powered on and operating normally.

Off:Power is not supplied to the switch.

Both Port LEDs

Solid green: 1 Gbps link on this port.

Blinking green: 1 Gbps activity on this port.

Off: No link is detected on this port.

Left Port LED only

Solid green: 100 Mbps link on this port.

Blinking green: 100 Mbps activity on this port.

Off: No link is detected on this port.

Right Port LED only

Solid green: 10 Mbps link on this port.

Blinking green: 10 Mbps activity on this port.

Off: No link is detected on this port.

Installation Guide

Product specificaties