Netgear GS305PP Handleiding

Bekijk gratis de handleiding van Netgear GS305PP (2 pagina’s), behorend tot de categorie Hűvös doboz. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over Netgear GS305PP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Guide

1. Register with the NETGEAR Insight app

1. Search for NETGEAR Insight and download the latest app.

2. Set up a NETGEAR account if you do not have one.

3. Tap the menu in the upper-left corner.

4. Tap REGISTER ANY NETGEAR DEVICE.

5. Use the camera on your mobile device to scan the serial number bar code,

or enter the serial number located on the bottom of the switch.

6. Tap GO.

The switch is registered and added to your account. You can now view the

switch in the NETGEAR Insight app.

Note: Because this is an unmanaged switch, you cannot congure or manage it

in NETGEAR Insight.

2. Connect the switch

VoIP phone

Internet

GS305PP

Internet

PoE

Sample connections

Security cameras

Access point

5-Port Gigabit Ethernet PoE Unmanaged Switch

GS305P (55W)

5-Port Gigabit Ethernet PoE+ Unmanaged Switch

GS305PP (83W)

Package contents

• Switch model GS305P or GS305PP

• DC power adapter

• Detachable power cable (varies by region)

• Wall-mount kit screws

• Four rubber footpads

• Installation guide

Note: We recommend that you use Category 5e (Cat 5e) cable or higher for

Gigabit Ethernet connections.

Note: The GS305PP switch supports both 802.3at (PoE+) and 802.3af (PoE).

Model GS305P supports 802.3af (PoE) only.

3. Check the LEDs

When you connect the power adapter to the switch and plug it into an electrical

outlet, the LEDs indicate the status.

The GS305P provides PoE power on ports 1–4 up to 15.4W PoE to each port, with

a PoE power budget of 55.5W across all active PoE ports.

The GS305PP provides PoE+ or PoE power on ports 1–4 up to 30W PoE to each

port, with a PoE power budget of 83W across all active PoE ports.

LED

Description

Power On. The switch is receiving power.

Off. The switch is not receiving power.

Ports 1–5

left port

On.1000 Mbps link on this port.

On. 100 Mbps or 10 Mbps link on this port.

Blinking. 1000 Mbps activity on this port.

Blinking. 100 Mbps or 10 Mbps activity on this port.

Off. No link is detected on this port.

Ports 1–4

right port

On. PoE is in use.

On. PoE halted.

Off. PoE is not in use on this port.

PoE MaxThe PoE Max LED indicates the status of the PoE budget on the

switch:

Off. Sufcient. More than 7W of PoE power is available.

On. Less than 7W of PoE power is available.

Blinking. At least once during the previous two minutes, less

than 7W of PoE power was available.

Router

Product specificaties