Netgear FS108Pv3 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Netgear FS108Pv3 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ProSafe 8-Port Switch with 4-Port PoE FS108P
Step 2. Connect power Step 3. Check status
Optional
modem
Step 1. Connect equipment
FS108P
Optional router
Computer Server
Internet
On
Off
Power LED
Activity (blinking)
No link (off)
(right LED)
10 Mbps link
Port LEDs
(left LED)
100 Mbps link
Installation Guide
PoE LEDs
Less than 7W of PoE
power is available
PoE Max. LED
PoE ports are working normally (off)
PoE MAX LED was active
in the previous 2 minutes (blinking)
PoE Active
No PoE use (off)
PoE fault
PoE Fault LED
FS108P IG 11oct2.fm Page 1 Friday, October 12, 2012 3:29 PM
September 2012
This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction’s laws that implement the
WEEE directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Specifications
Specification Description
Network interface 10/100Mbps Auto-Uplink RJ45 ports with PoE enabled (ports 1 - 4)
10/100Mbps Auto-Uplink RJ45 ports (port 5 - 8)
Network cable Category 5 (Cat 5) or better Ethernet cable
Ports 8
Power adapter 48V @ 1.25A DC input
PoE Power
consumption
53W max (all PoE ports, ports 1 to 4), 15.4W max per PoE port
Weight 0.74 kg (1.7 lbs)
Dimensions
(W x D x H)
235 mm x103 mm x 27 mm
9.3 in. x 4.1 in.x 1.1 in.
Operating
temperature
0 to 40 C (32 to 104 F)
Operating humidity 10% to 90% relative humidity, non-condensing
Electromagnetic
compliance
CE Class B; FCC Class B; VCCI Class B; C-Tick Class B, CCC
Safety agency
approvals
CE/LVD, CCC
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at .https://my.netgear.com
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit http://support.netgear.com.
FS108P IG 11oct2.fm Page 2 Friday, October 12, 2012 3:29 PM


Product specificaties

Merk: Netgear
Categorie: Niet gecategoriseerd
Model: FS108Pv3

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear FS108Pv3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Netgear

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd