Netgear AG711F Handleiding

Netgear Niet gecategoriseerd AG711F

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear AG711F (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

Gigabit Ethernet Modules AG711T AG711F/

™

The modularity of the FS726 and 750 Switches provides you with a highly

adaptable network. You not only can configure your network for copper and/or

fiber gigabit uplinks, but you also can opt to expand your network gradually

and affordably, as needed.

Installing a Gigabit Ethernet module:

1. Unscrew and remove the module cover plate.

2. Insert the module into the slot, pressing firmly to seat the module.

3. Tighten the module screws.

4. Press the reset button if the power has remained on throughout the installation 

of the gigabit modules.

Trademarks

NETGEAR is a registered trademark of NETGEAR, Inc., in the

United States and other countries. All other trademarks and

registered trademarks are the property of their respective owners.

Statement of Conditions

In the interest of improving internal design, operational function,

and/or reliability, NETGEAR reserves the right to make changes to

the products described in this document without notice. NETGEAR

does not assume any liability that may occur due to the use or

application of the product(s) or circuit layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified the NETGEAR Model AG711T and AG711F

Product Description has been suppressed in accordance with the

conditions set out in the MBPT-AmtsblVfg 243/1991 and Vfg

46/1992. The operation of some equipment (for example, test

transmitters) in accordance with the regulations may, however,

be subject to certain restrictions. Please refer to the notes in the

operating instructions. Federal Office for Telecommunications

Approvals has been notified of the placing of this equipment on

the market and has been granted the right to test the series for

compliance with the regulations.

EN 55 022 Declaration of Conformance

This is to certify that the NETGEAR Model AG711T and AG711F

Product Description is shielded against the generation of radio

interference in accordance with the application of Council Directive

89/336/EEC, Article 4a. Conformity is declared by the application

of EN 55 022 Class A (CISPR 22)

FCC Compliance Notice: Radio Frequency Notice

Federal Communications Commission (FCC) Compliance Notice:

Radio Frequency Notice

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions:

- This device may not cause harmful interference.

- This device mush accept any interference received, including 

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a commercial

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference

to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in which

case users will be required to take whatever measures may be

necessary to correct the interference at their own expense.

Warning/Logo

Warning: This is a Class A product. In a domestic environment,

this product may cause radio interference, in which case the user

may be required to take appropriate measures.

Specifications

AG711T: IEEE802.3ab 1000BASE-T Gigabit Ethernet

AG711F: IEEE802.3z 1000BASE-SX Gigabit Ethernet

M1-AG711-0

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	AG711F
Kleur van het product:	Grijs
Connectiviteitstechnologie:	Bedraad
Bekabelingstechnologie:	1000Base-SX
Intern:	Ja
Overdrachtssnelheid:	1 Gbit/s