Netgear AFM735 Handleiding

Bekijk gratis de handleiding van Netgear AFM735 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Netgear AFM735 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Guide

e

ProSafe 100MBaseFX SFP Module AFM735

Install Your Optical Module

The 100MBaseFX SFP Module provides a full-duplex 100M bps each direction for

Ethernet operation on NETGEAR managed switches.

The switch will automatically detect the AFM735, so you can simply plug it into an

available module slot.

The module can be inserted or removed while the switch is operational.

AFM735

Tx

Rx

Installing a AFM735 Module

Insert the module firmly into the slot that supports the SFP interface. The AFM735

supports legacy 62.5/125µm OM1 multimode fiber cables up to 2km.

Removing a AFM735 Module

Release the module latch by pulling down the handle bar across the module, and pull

the module out of the module slot.

Tx

Rx

Tx

Rx

Table 1:

Technical Specifications

StandardsIEEE 802.3-2002 100BaseFX

Wave Length1310nm

Dimensions (HxWxD)0.48" x 2.70" x 0.54"

(12.2mm x 68.56mm x 13.70mm)

Weight0.055 lb (25g)

Operating Temperature23 -158º F (-5 - 70ºC)

Storage Temperature-40 ~185 ºF (-40 ~ 85ºC)

Operative relative humidity5 to 95% @ (25ºC)

Operating DistanceUp to 2km for the 62.5/125µm MMF

Connectors LC

Power Consumption<1.2W

MTBF1,587,201 Hrs(~181 years) at 25ºC

Safety CertificationUL 60950-1,CSA C22.2 No. 60950-1-03

Environmental ComplianceRoHS

AFM735_IG_12July10.fm Page 1 Monday, July 12, 2010 12:45 PM

Product specificaties