Nemco 6200 Handleiding

Bekijk gratis de handleiding van Nemco 6200 (2 pagina’s), behorend tot de categorie Pizzaoven. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over Nemco 6200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

NEMCO OVEN

Model Series: 6200 WARMING & BAKING OVEN

OPERATING INSTRUCTIONS

INTRODUCTION

1.Read These Operating Instructions thoroughly before installing or using this Equipment. Improper

installation or use can result in equipment or property damage, electric shock or personal injury.

2.Nemco Ovens are heavy duty and are designed for commercial use.

3.Trained personnel should operate this equipment only.

SAFETY INSTRUCTIONS

1.IMPORTANT: Clean machine thoroughly before first use and after all uses, using cleaning instructions

below.

2.IMPORTANT: Incoming power MUST be the same as the equipment’s rating. Refer to the Electrical

Ratings listed on the equipment’s Data Tag Located on the back of the unit.

3.CAUTION: This Oven’s power cord is equipped with a GROUNDED, 3-prong power cord. Plug only into a

Matching, grounded outlet. DO NOT cut or break off the third prong. Operating this equipment without

proper grounding may result in electric shock.

4.CAUTION: Always disconnect Power before servicing.

5.CAUTION: Do not operate with a damaged cord or plug or after the machine malfunctions, has been

dropped or damaged. Use authorized service for examination, electrical or mechanical adjustment or

repair.

6.CAUTION: Equipment surfaces are HOT during use and a short time after disconnecting the power.

Allow to cool before moving or servicing.

ELECTRICAL REQUIREMENTS

1.The electrical ratings are listed on the equipment’s Data Tag located on the back of this equipment.

2.Model: 6200 is rated 120 Volts, 1500 Watts, and 12.5 Amps and has a NEMA 5-20P plug and grounded

cord.

3.This equipment must be properly GROUNDED.

PREPARATION

1.Cut banding and lift top carton off.

2.Lift unit out of bottom tray and set unit on a flat surface.

3.Open door & Remove racks/unwrap & reinstall in desired position.

4.Remove any white plastic coating that may be affixed to stainless steel surfaces.

5.Position unit near the power outlet. Do not use extension cords. Arrange cord where it will not be

tripped over.

6.This appliance has hot and live electrical parts inside. Do not use it in areas where gasoline, paint or

flammable liquids are used or stored.

7.This model must be operated with legs at all times.

8.If unit fails to work properly when first operated call NEMCO customer service at 1-800-782-6761.

Product specificaties