Nedis SAMP41148ME Handleiding

Nedis Receiver SAMP41148ME

Lees hieronder de 📖 handleiding in het Nederlandse voor Nedis SAMP41148ME (1 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

5.0V 1.0 A, 5.0 W

NL-5215MC 28

Made in China

Bat ch: 013984/XXXXXXXXXX

POWER IN

CATV Amplier

SAMP41148ME

Features

●

5-65MHz, 85-1218MHz two way frequency range

For use with cable TV

Simple to install

LED power on indicator

Connections for up to four devices

Part list

Amplifier

AC/DC adapter

Wood screws x 2

Quick setup guide

Connecting the amplifier

Specifications

Installation methods

18.5 mm

6.8 mm

2.0 m max.

(79”)

Wall

Product

Wood screws

86 mm

Bi-directional CATV Amplifier

SAMP41148ME

Cable modem

Coaxial

Cable

Adapter

Safety

1. Connect a coaxial cable to the INPUT jack on the amplifier

and to the cable TV.

2. Connect a coaxial cable to the OUT 1 jack on the amplifier

and to the CATV IN jack on the back of the TV, or cable

modem.

3. Connect the AC/AD adapter to the POWER IN jack and to a

power outlet. When the amplifer is connected to a power

outlet, the POWER IN indicator lights.

NOTE: You can also connect devices to the OUT2, OUT3, and

OUT4 jacks.

Unused outputs must be terminated with a 75 ohm

terminating resistor.

This bi-directional CATV amplifier is designed to work with cable systems that have pay-per-view, digital cable,

or cable modems.

Fre encyqu

Gain

Return path

Return loss

Noise figure

Output level

Impedance

Connector

Output

Power adapter

Dimensions

5-65MHz

n.a.

-7.5dB typ.

15dB typ.

n.a.

85-1 MHz218

9dB

15dB typ.

5.5dB

105dBµV

n.a.

75 ohm

F Female

4 connectors

100-240V 50-60Hz / 5.0V 1.0A, 5.0W ~

94 x 69 x 22 (mm)

• Indoor wall mount: Mount two wood screws with center

distance 86mm (3.39") into the wall.

• The wood screws is suitable for mounting at height 2.0m

max. (79")

• Refer to the illustration to install the device correctly.

To reduce risk of shock, this product should only be opened by

an authorized technician when service is required.

Disconnect the product from the mains and other equipment if a

problem should occur.

Read the manual carefully before use. Keep the manual for

future reference.

Only use the device for its intended purposes. Do not use the

device for other purposes than described in the manual.

Do not use the device if any part is damaged or defective.If the

device is damaged or defective, replace the device

immediately.

The device is suitable for indoor use only. Do not use the

device outdoors.

Do not expose the product to water or moisture. Only use the

supplied power adapter.

Where the MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily

operable.

●

Product specificaties

Merk:	Nedis
Categorie:	Receiver
Model:	SAMP41148ME
Kleur van het product:	Zilver
Breedte:	94 mm
Diepte:	22.5 mm
Hoogte:	72 mm
Snoerlengte:	1.8 m
Breedte verpakking:	45 mm
Diepte verpakking:	100 mm
Hoogte verpakking:	175 mm
Type stroombron:	DC
Ingangsspanning:	5 V
Aantal:	1
Frequentie bereik:	85 - 1218 MHz
Type product:	Forward-equalizer
Aantal poorten:	4
Frequentie bereik (achterwaartse pad):	5 - 65 MHz
Geluid figuur:	5.5 dB
Winst:	9 dB