Nec NC1440L Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Nec NC1440L (90 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/90
User’s Manual
DLP Cinema® Projector
NC1040L-A/NC1440L-A
Laser Unit
NP-10LU01
DLP Cinema® Projector
Model No.
NP-NC1040L-A
NP-NC1440L-A
2
Important Information (for NC1040L-A)
Precautions: Please read this manual carefully before
using your NC1040L-A and NP-10LU01 and keep the man-
ual handy for future reference.
The NC1040L-A (projector unit) is called the “projector”, and
the NP-10LU01 (laser unit) is called the “laser unit” in this
manual.
• DLP, DLP Cinema and their respective logos are trade-
marks or registered trademarks of Texas Instruments.
• CineLink, CineCanvas, CinePallette, and CineBlack are
trademarks of Texas Instruments.
• Microsoft, Windows, and Internet Explorer are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
• Java is a trademark of Oracle Corporation in the United
States and other countries.
• Linux is a Registered Trademark of Linus Torvalds.
• Mozilla, Firefox is a trademark of Mozilla Foundation.
• Other product names and manufacturer names described
in this manual are the registered trademarks or trade-
marks of their respective companies.
• The display screens and illustrations shown in this man-
ual may differ slightly from the actual ones.
• GPL/LGPL Software Licenses
The product includes software licensed under GNU
General Public License (GPL), GNU Lesser General
Public License (LGPL), and others.
For more information on each software, see “readme.pdf”
inside the “about GPL&LGPL” folder on the supplied
CD-ROM.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT OPEN
TOP COVER. NO USER-SERVICEABLE PARTS
INSIDE.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact
with any part inside of this unit.
This symbol alerts the user that important lit-
erature concerning the operation and mainte-
nance of this unit has been included. Therefore,
it should be read carefully in order to avoid any
problems.
Laser Safety Caution
This products is classiîšśed as Class 3R of IEC60825-1:2007.
Also complies with FDA performance standards for laser
products except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007. Obey the laws and regulations of
your country in relation to the installation andmanagement
the device.
CAUTION – CLASS 3R LASER PRODUCT
LASER LIGHT – AVOID DIRECT EYE EXPOSURE
CAUTION
Use of controls or adjustments or performance of proce-
dures other than those speciîšśed herein may result in
hazardous radiation exposure.
• Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
• Do not look at the light coming from the lens using optical
equipment (such as magnifying glasses or mirrors).
Doing so may cause loss of vision.
• When you turn on the projector, check that nobody is
looking at the lens.
• The following laser light is used in this projector.
• RED: Max. 49 W, LD, CW, 636 to 644 nm
• GREEN: Max. 32 W, SOLID STATE LASER, CW, 532
nm
• BLUE: Max. 23 W, LD, CW, 455 to 470 nm
DOC compliance Notice
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in
accordance with EN ISO 7779.
3
Important Information (for NC1040L-A)
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
CAUTION
• In order to reduce any interference with radio and tele-
vision reception use a signal cable with ferrite core
attached. Use of signal cables without a ferrite core
attached may cause interference with radio and televi-
sion reception.
• This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the installa-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
WARNING
THE END USER IS NOT ALLOWED TO OPEN OR
MODIFY THE PRODUCT.
NO USER SERVICEABLE PARTS.
MAINTAIN AND SERVICE OF THE PRODUCT IS ONLY
TO BE HANDLED BY NEC AUTHORIZED TECHNICIANS.
Important Safeguards
These safety instructions are to ensure the long life of your
projector and to prevent îšśre and shock. Please read them
carefully and heed all warnings.
Installation
1. Do not point the projection beam toward other people or
reîš«ective objects. Consult your dealer for information
about transporting and installing the projector. Do not
attempt to transport and install the projector yourself.
The projector must be installed by qualiîšśed technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
2. Place the projector on a îš«at, level surface in a dry area
away from dust and moisture.
Do not put the projector on its side when the light source
is on.
Doing so may cause damage to the projector.
3. Do not place the projector in direct sunlight, near heaters
or heat radiating appliances.
4. Exposure to direct sunlight, smoke or steam could harm
internal components.
5. Handle your projector carefully. Dropping or jarring your
projector could damage internal components.
6. To carry the projector, a minimum of three persons are
required.
7. Do not hold the lens part with your hand. Otherwise the
projector may tumble or drop, causing personal injury.
8. Do not place heavy objects on top of the projector.
9. Turn off the projector, and disconnect the power cable
before moving the projector.
10. The cooling fan settings need to be conîšśgured when
using the projector in a location at an altitude of approxi-
mately 5500 feet/1600 meters or higher. Consult your
dealer in advance.
11. If you wish to have the projector installed on the ceiling;
• Do not attempt to install the projector yourself.
• The projector must be installed by qualied techni-
cians in order to ensure proper operation and reduce
the risk of bodily injury.
• In addition, the ceiling must be strong enough to sup-
port the projector and the installation must be in
accordance with any local building codes.
• Please consult your dealer for more information.
12. Turn off the projector when removing and installing
lenses. Failure to do so can cause loss of vision.
13. Do not place the projector in the following conditions:
• on an unstable cart, stand, or table.
• near water, baths, or damp rooms.
• in direct sunlight, near heaters, or heat radiating
appliances.
• in a dusty, smoky, or steamy environment.
• on a sheet of paper or cloth, rugs or carpets.
14. When moving the projector, check the following:
• That the projector and laser unit are turned off, the
projector power plug is disconnected from the outlet,
and the breaker connected to the AC power cable of
the laser unit is disconnected
• That the connector cable that connects the device to
the projector is unplugged
WARNING
1. Do not use the projector with the supplied lens cap or
glass protector cap attached, and do not attach the
glass protector cap while the projector is operating.
This may cause the lens cap or glass protector cap to
heat up and deform or melt.
2. Do not place any objects which are easily affected by
heat in front of the projector lens while the projector
is on. Doing so could lead to the object melting from
the heat that is emitted from the light output.
Product specificaties
| Merk: | Nec |
| Categorie: | Beamer |
| Model: | NC1440L |
Heb je hulp nodig?
Als je hulp nodig hebt met Nec NC1440L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beamer Nec
29 Juni 2023
26 Juni 2023
21 Juni 2023
20 Juni 2023
11 Juni 2023
7 Juni 2023
4 Juni 2023
3 Juni 2023
24 Mei 2023
22 Mei 2023
Handleiding Beamer
- Beamer Philips
- Beamer HP
- Beamer Sony
- Beamer Samsung
- Beamer Xiaomi
- Beamer Casio
- Beamer Panasonic
- Beamer Epson
- Beamer LG
- Beamer Asus
- Beamer Canon
- Beamer JVC
- Beamer Medion
- Beamer Toshiba
- Beamer Yamaha
- Beamer Acco
- Beamer Acer
- Beamer Aiptek
- Beamer Anker
- Beamer ASK Proxima
- Beamer Auna
- Beamer Barco
- Beamer BenQ
- Beamer Blaupunkt
- Beamer D-Link
- Beamer Dell
- Beamer Easymaxx
- Beamer Eiki
- Beamer Elmo
- Beamer Emtec
- Beamer GPX
- Beamer Hama
- Beamer Hisense
- Beamer Hitachi
- Beamer Ibm
- Beamer InFocus
- Beamer Ion
- Beamer Klarstein
- Beamer Kodak
- Beamer La Vague
- Beamer Lenco
- Beamer Lenovo
- Beamer Livoo
- Beamer Marantz
- Beamer Maxell
- Beamer Mitsubishi
- Beamer Nebula
- Beamer PLUS
- Beamer Polaroid
- Beamer Pyle
- Beamer RCA
- Beamer Reflecta
- Beamer Renkforce
- Beamer Ricoh
- Beamer Salora
- Beamer Sanyo
- Beamer Sharp
- Beamer Showtec
- Beamer Smart
- Beamer Smartwares
- Beamer Speaka
- Beamer Steinel
- Beamer Technaxx
- Beamer Viewsonic
- Beamer Vivitek
- Beamer Vogels
- Beamer XGIMI
- Beamer ZTE
- Beamer Odys
- Beamer OK
- Beamer Oki
- Beamer Optoma
- Beamer Overmax
- Beamer 3M
- Beamer KrĂĽger And Matz
- Beamer Naxa
- Beamer Steren
- Beamer Eurolite
- Beamer Prixton
- Beamer Planar
- Beamer Dukane
- Beamer Yaber
- Beamer Mimio
- Beamer Da-Lite
- Beamer Adj
- Beamer Dahua Technology
- Beamer Derksen
- Beamer Celly
- Beamer Promethean
- Beamer Stairville
- Beamer Cameo
- Beamer Tzumi
- Beamer EKO
- Beamer MicroVision
- Beamer Elite Screens
- Beamer Fun Generation
- Beamer Christie
- Beamer Futurelight
- Beamer Varytec
- Beamer Ultimea
- Beamer Dream Vision
- Beamer Knoll
- Beamer DTS
- Beamer Touchjet
- Beamer Boxlight
- Beamer AAXA Technologies
- Beamer Miroir
- Beamer Vankyo
- Beamer AWOL Vision
- Beamer Smart Tech
- Beamer Atlantis Land
- Beamer KickAss
Nieuwste handleidingen voor Beamer
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
3 April 2024
3 April 2024
3 April 2024
3 April 2024