Nec NC1100L Handleiding

Nec Beamer NC1100L

Lees hieronder de đź“– handleiding in het Nederlandse voor Nec NC1100L (82 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/82
User’s Manual
DLP Cinema® Projector
NC1100L-A
DLP Cinema® Projector
Model No.
NP-NC1100L-A
2
Important Information
Precautions
Please read this manual carefully before using your
NC1100L-A and keep the manual handy for future refer-
ence. The NC1100L-A (projector unit) is called the “pro-
jector”, and the NP-90MS01 (integrated media server) is
called the “media block” or “IMB” in this manual.
• DLP, DLP Cinema and their respective logos are trade-
marks or registered trademarks of Texas Instruments.
• CineLink, CineCanvas, CinePallette, and CineBlack are
trademarks of Texas Instruments.
• Microsoft, Windows, and Internet Explorer are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
• Java is a trademark of Oracle Corporation in the United
States and other countries.
• Linux is a Registered Trademark of Linus Torvalds.
• Mozilla, Firefox is a trademark of Mozilla Foundation.
• Other product names and manufacturer names described
in this manual are the registered trademarks or trade-
marks of their respective companies.
• The display screens and illustrations shown in this man-
ual may differ slightly from the actual ones.
• GPL/LGPL Software Licenses
The product includes software licensed under GNU
General Public License (GPL), GNU Lesser General
Public License (LGPL), and others.
For more information on each software, see “readme.pdf”
inside the “about GPL&LGPL” folder on the supplied
CD-ROM.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT OPEN
TOP COVER. NO USER SERVICEABLE PARTS
INSIDE.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact
with any part inside of this unit.
This symbol alerts the user that important lit-
erature concerning the operation and mainte-
nance of this unit has been included. Therefore,
it should be read carefully in order to avoid any
problems.
Laser Safety Caution
This products is classiîšśed as Class 3R of IEC60825-1
Second edition 2007-03. Also complies with FDA perfor-
mance standards 21 CFR 1040.10 and 1040.11 for laser
products except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007. Obey the laws and regulations of
your country in relation to the installation and management
of the device.
CAUTION
Use of controls or adjustments or performance of proce-
dures other than those speciîšśed herein may result in
hazardous radiation exposure.
CAUTION – CLASS 3R LASER PRODUCT
LASER LIGHT – AVOID DIRECT EYE EXPOSURE
• Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
• Keep any items such as magnifying glass out of the light
path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects
that can redirect light coming out of the lens, can cause
unpredictable outcome such as îšśre or injury to the eyes.
• When turning on the projector, ensure that nobody is fac-
ing towards the lens in the path of the light emitted from
the laser.
DOC compliance Notice
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in
accordance with EN ISO 7779.
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
3
Important Information
CAUTION
• In order to reduce any interference with radio and tele-
vision reception use a signal cable with ferrite core
attached. Use of signal cables without a ferrite core
attached may cause interference with radio and televi-
sion reception.
• This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the installa-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
WARNING
THE END USER IS NOT ALLOWED TO OPEN OR
MODIFY THE PRODUCT.
NO USER SERVICEABLE PARTS.
MAINTAIN AND SERVICE OF THE PRODUCT IS ONLY
TO BE HANDLED BY NEC AUTHORIZED TECHNICIANS.
Important Safeguards
These safety instructions are to ensure the long life of your
projector and to prevent îšśre and shock. Please read them
carefully and heed all warnings.
Installation
1. Do not point the projection beam toward other people or
reective objects. Consult your dealer for information
about transporting and installing the projector. Do not
attempt to transport and install the projector yourself.
The projector must be installed by qualiîšśed technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
2. Place the projector on a at, level surface in a dry area
away from dust and moisture. Tilting the front of the pro-
jector up or down from level could reduce Laser life. Do
not put the projector on its side when the Laser is on.
Doing so may cause damage to the projector.
3. Do not place the projector in direct sunlight, near heaters
or heat radiating appliances.
4. Exposure to direct sunlight, smoke or steam could harm
internal components.
5. Handle your projector carefully. Dropping or jarring your
projector could damage internal components.
6. To carry the projector, a minimum of four persons are
required.
7. Do not hold the lens part with your hand. Otherwise the
projector may tumble or drop, causing personal injury.
8. Do not place heavy objects on top of the projector.
9. Turn off the projector, and disconnect the power cable
before moving the projector.
10. The cooling fan settings need to be conîšśgured when
using the projector in a location at an altitude of approxi-
mately 5500 feet/1600 meters or higher. Consult your
dealer in advance.
11. If you wish to have the projector installed on the ceiling;
• Do not attempt to install the projector yourself.
• The projector must be installed by qualied techni-
cians in order to ensure proper operation and reduce
the risk of bodily injury.
• In addition, the ceiling must be strong enough to sup-
port the projector and the installation must be in
accordance with any local building codes.
• Please consult your dealer for more information.
12. When main body is damaged, cooling uids may come
out of internal part. DO NOT touch and drink the cooling
uid.
When the cooling uids are swallowed or contacted with
your eyes, please consult with doctors immediately.
WARNING
1. Do not use the projector with the supplied lens cap or
glass protector cap attached, and do not attach the
glass protector cap while the projector is operating.
This may cause the lens cap or glass protector cap to
heat up and deform or melt.
2. Do not place any objects, which are easily affected by
heat, in front of the projector lens. Doing so could
lead to the object melting from the heat that is emitted
from the light output.
When using the projector tilted in the forward or backward
direction, use it in the range of (+10° to -15°) from horizontal.
If you tilt it outside of this range or tilt it to the left or right, it
may become damaged.
If the projector is tilted outside of this range when used tilted
in the forward or backward direction, “TiltDegreeOver” is
displayed on the LCD screen. If this message appears,
change the installation of the projector so that the angle is
within the given range from horizontal.
10°
15°
When installed on a floor or a desktop
10°
15°
When installed suspended from the ceiling


Product specificaties

Merk: Nec
Categorie: Beamer
Model: NC1100L

Heb je hulp nodig?

Als je hulp nodig hebt met Nec NC1100L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Nec

Handleiding Beamer

Nieuwste handleidingen voor Beamer