Neato Robotics Botvac D6 Connected Handleiding

Neato Robotics Stofzuiger Botvac D6 Connected

Bekijk gratis de handleiding van Neato Robotics Botvac D6 Connected (44 pagina’s), behorend tot de categorie Stofzuiger. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 4.5 sterren uit 26.5 reviews. Heb je een vraag over Neato Robotics Botvac D6 Connected of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/44

QUICK

START

Start her Start her | | Aloita tästä | Börja här

1 BEFORE BEGINNING

To operate correctly, remove all protective ﬁlms and shipping

material from the robot and charge base.

Have your smartphone / tablet available.

You will need your wiﬁ network name and password.

TIP: Locate your router in a central location where it

can deliver a strong signal throughout the house.

2 SET UP CHARGE BASE

Plug the power cord

securely into the

charge base.

Adjust the length of

the cord by wrapping it as shown.

3 INITIAL ROBOT CHARGING

Place the rounded side

of your Neato robot

against the metal

charging contacts on

the charge base until

the contacts are

pushed all of the way in.

For best results, charge the robot fully before your ﬁrst cleaning cycle.

NOTE: During bootup, the robot LEDs next to the Start Button

will alternately blink blue. You will need to wait for an audible tone

before performing additional functions.

NOTE: Your robot is only compatible with the included charge base.

4 ACCESSING THE NEATO APP

• Download the Neato app on your smartphone / tablet

• Open the Neato app and create a Neato account

TIP: If you have an existing Neato account, you can just sign in

• Upon setting up your account, you will be sent a veriﬁcation

email. You must go to your email and verify it before proceeding

to the next step.

• Sign in to the Neato app

• Follow steps in the Neato app to CONNECT YOUR ROBOT

TIP: Your robot is in pairing mode for the ﬁrst 60 minutes after

you turn on your robot for the ﬁrst time.

Choose a wall outlet that has a 3’ (1 m)

clearance on both sides and in front

of the charge base. This helps your

robot ﬁnd the charge base.

Plug in the power cord and push

the charge base against the wall.

TIP: Locate the charge base on a hard ﬂoor surface.

TIP: Make sure the power outlet is not controlled by a switch.

Charging Contacts

Connecting Your Robot

ENGLISH

Product specificaties

Merk:	Neato Robotics
Categorie:	Stofzuiger
Model:	Botvac D6 Connected
Kleur van het product:	Zwart
Gewicht:	3402 g
Breedte:	335.5 mm
Diepte:	319 mm
Hoogte:	99.6 mm
Geluidsniveau:	- dB
Ondersteunde mobiele besturingssystemen:	Android,iOS
Oplaadtijd:	2.5 uur
Capaciteit van de accu/batterij:	- mAh
Type verpakking:	Doos
Stofzuigercontainer type:	Stofzak
Looptijd:	120 min
Smartphone ondersteuning op afstand:	Ja
Vorm:	D-shape
Automatisch terug naar basisstation:	Ja
Geïntegreerde sensoren:	Laser
Stofcapaciteit (totaal):	0.7 l
Oplaadbaar:	Ja
Op afstand bedienbaar:	Ja
Nat dweilen:	Nee
Trapdetectie:	Ja
Ondersteunde soorten vloeren:	Carpet,Hard floor,Laminate,Linoleum,Parquet,Tiles,Wood
Navigatie type:	LaserSmart
Wifi:	Ja
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Werkbreedte:	304.8 mm
Inclusief virtuele barrière:	Ja