Native Trails Topanga VNA201 Handleiding
Native Trails
Niet gecategoriseerd
Topanga VNA201
Bekijk gratis de handleiding van Native Trails Topanga VNA201 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over Native Trails Topanga VNA201 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
When cleaning up after installations, DO NOT USE ABRASIVE CLEANERS, as they may scratch and change the vanity surface.
Use warm water, a soft cloth and a non-abrasive soap to clean the surface.
Refer to the Care and Maintenance Instructions for more information.
Installation Instructions
Topanga and Vintner’s Floating Vanities
• It is strongly recommended that Native Trails wall mount vanities are installed by a licensed contractor.
• Observe all local plumbing and building codes.
• Have a licensed contractor determine if the wall is strong enough to adequately hold the weight of a full wall
mount and applicable accessories.
• Ensure proper access to the final plumbing connections.
• Place a protective covering on the floor to prevent damage, unpack and inspect the wall mount for any damage.
CAUTION: Risk of personal injury. Native Trails Wall Mounts are extremely heavy, obtain sufficient help when lifting
or moving.
CAUTION: Risk of property damage. Make sure that watertight seals exist on all drain connections, and that
flooring, walls, and adjacent cabinetry are adequately protected while installing.
Tools Needed:
Level
Pencil
Measuring Tape
Stud Finder
Drill
Materials Recommended:
±8 - 4.5" Fastenmaster HeadLOK
Heavy-Duty Flathead Fasteners Screws
General Instructions:
3.
Hang vanity by connecting French Cleat (A) and French Cleat (B)
securely into each other. Check with Level again and adjust
slightly if needed.
4. Install at least two 4.5" screws per stud through the vanity and
into French Cleat (A) to secure the vanity to the studs.
(Figure 2)
1. Mark the height and width of the vanity on the wall at
the desired height in coordination with the location
of the studs.
2.
Use a Level and attach French Cleat (B) to wall into the
studs using at least two 4.5" screws per stud.
(Figure 1)
Figure 1
Figure 2
4.5"
Screws
French
Cleat
(B)
French
Cleat
(A)
Vanity
4.5"
Screws
French
Cleat
(B)
Wall Studs
Product specificaties
| Merk: | Native Trails |
| Categorie: | Niet gecategoriseerd |
| Model: | Topanga VNA201 |
Heb je hulp nodig?
Als je hulp nodig hebt met Native Trails Topanga VNA201 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Native Trails
14 Mei 2025
14 Mei 2025
Handleiding Niet gecategoriseerd
- Bravilor Bonamat
- BBQ Premium
- Oster
- Micsig
- BEKO
- Astropet
- BCA
- Triax
- Hotpoint
- Austrian Audio
- Physa
- SilentiumPC
- Coline
- 3Doodler
- Orion
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025