National Optical DC5-169-SP Handleiding
National Optical
Miscroscoop
DC5-169-SP
Bekijk gratis de handleiding van National Optical DC5-169-SP (16 pagina’s), behorend tot de categorie Miscroscoop. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 1.5 reviews. Heb je een vraag over National Optical DC5-169-SP of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
National Optical & Scientic Instruments Inc.
6508 Tri-County Parkway
Schertz, Texas 78154
Phone (210) 590-9010 Fax (210) 590- 1104
INSTRUCTIONS FOR
DC5- Series 169
DIGITAL COMPOUND BIOLOGICAL MICROSCOPE
Copyright © 11/4/ 2016
National Optical & Scientic Instrument Inc.
2
LED indicator light
Eyepiece
Interpupillary
scale
Three position sliding rod
Sliding interpupillary adjustment
grips located on both left and
right side of diopter scale
Viewing head of
microscope
Revolving nosepiece
Objective lenses
Arm
Mark on side of eyepiece tube
for indexing diopter reading
Light intensity
control knob
Base
Illuminator condenser
Knobs controlling X
and Y movement of
mechanical stage
Fine focus
knob
Coarse focus
knob
Specimen holder
(mechanical stage)
Stage
Abbe condenser 1.25
N.A.
Iris diaphragm lever
Filter holder
Knurled locking screws
(for securing specimen
holder to stage)
Control knob for
Abbe condenser
INTRODUCTION
USB Port
Power Switch
Power Port
3
Thank you for your purchase of a National microscope. It is a well built, precision instrument carefully checked to
assure that it reaches you in good condition. It is designed for ease of operation and years of carefree use. The
information in this manual probably far exceeds what you will need to know in order to operate and maintain your
microscope. However, is provided to answer questions which might arise, and to help you avoid any maintenance
expense that may be unnecessary.
Your new compound microscope is a high performance microscope with high quality achromatic objective lenses that
provide good resolution and optical centering. The microscope is designed with a built-in ball bearing mechanical stage
providing a travel range of 75mm x 50mm in the X and Y direction with graduation reading 0.1mm for accurate up to
positioning of specimen. Also included is a ball bearing quadruple nosepiece, precision coaxial focusing mechanism,
rack and pinion mounted N.A. 1.25 Abbe condenser and built-in 3 watt LED variable light source. Retain the
styrofoam container in case the microscope must be transported or returned to factory for any reason.
UNPACKING
The microscope and accessories have been carefully packed to assure they reach you in the best possible
condition. Do not discard packing container or materials until all components are accounted for. Save the the
packing container in case microscope needs transporting to another location or shipped for repairs. the
Components are packed within container as indicated below. the
A. Microscope body with 1.25 N.A. Abbe condenser and iris diaphragm
B. Two WF10x eyepieces
C. Two rubber eyecups
D. Four objective lenses: DIN 4x, 10x, 40xR, 100xR oil immersion
E. Specimen holder for mechanical stage
F. 12VDC switching power supply, operates on 100v-240v, 50H/60H
G. Power cord
H. CD Motic Images software
I. Calibration slide
J. USB cable (for connecting to computer)
K. Dustcover
1. Lay container (A) at and carefully remove microscope stand. head and
NOTICE To protect focus mechanism during
shipment, two black plastic wedges (b)
and one black plastic block (c) are
inserted at strategic points as indicated.
These plastic parts be removed prior MUST
to operating microscope. Failure to do so
will result in damage to focusing mechanism
and will void your warranty.
1. Remove two black Velcro straps (a).
2. Remove wedges (b) by pulling apart the
two parts of wedge in opposite directions.
3. Lower stage by rotating coarse focus
knob, on side of microscope illustrated,
in counter-clockwise direction
4. Remove blocks (c) from stand.
5. These components should be retained with styrofoam container
2. Carefully remove from the stand all tape and packing material used to protect microscope components during
shipment.
3. -wrap components, making certain that lens surfaces do not come in contact with dust, dirt, ngerprints. Un the
Damage to optical surfaces can result from such contaminants, and reduce image quality.
OPERATION
1. Illumination.
(a)
(b)
(a)
(c)
Product specificaties
| Merk: | National Optical |
| Categorie: | Miscroscoop |
| Model: | DC5-169-SP |
Heb je hulp nodig?
Als je hulp nodig hebt met National Optical DC5-169-SP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Miscroscoop National Optical
2 April 2025
1 April 2025
12 December 2024
12 December 2024
18 Juni 2024
Handleiding Miscroscoop
- Steinberg
- Traveler
- Nikon
- National Geographic
- Leica
- MAGUS
- Carson
- Dnt
- Bresser
- Barska
- Ideal Tek
- PCE Instruments
- Toolcraft
- Zeiss
- Maginon
Nieuwste handleidingen voor Miscroscoop
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025