Natec Beaver Home NSH-1316 Handleiding
Natec
Papiervernietiger
Beaver Home NSH-1316
Bekijk gratis de handleiding van Natec Beaver Home NSH-1316 (12 pagina’s), behorend tot de categorie Papiervernietiger. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.9 sterren uit 3.5 reviews. Heb je een vraag over Natec Beaver Home NSH-1316 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
BEAVER HOME
User Manual
EN PL
GENERAL INFORMATION
SHREDDER NATEC BEAVER HOME
Thank You for choosing our product. Please read the instruction manual carefully and follow the safety
instructions. Non-compliance with the user manual and information about the correct operation of the device,
we are not responsible for any personal or material damage resulting from this. Such cases will invalidate the
warranty.
The Natec Beaver Basic is a reliable shredder ideal not only for a small office, but also for home using. Its small
dimensions allow you to place the device anywhere for example under the desk. The shredder has a reverse
function that helps to pull the paper out during jam. The Beaver Basic is an economical product it will make
everyday work easier for You.
SPECIFICATION
PACKAGE CONTENT:
Shredder head
Basket
User manual
Model
Voltage
Shred type
Shred size
Sheet capacity 80g/m2
Can shred
Paper entry width (mm)
Shredding speed m/min
Security level DIN
Automatic start/stop
Overheating protection
Reverse function
Basket capacity
Noise level
Maximum Run time
Color
Net weight
Cable length
Dimensions
Beaver Home
220-240 V, 50~60 Hz
Strip cut
7 mm
5
Paper
215
2,2
P-1
7 L
72 dB
2 min. work / 60 min. brake
Black
1,2 kg
1,5 m
310 x 125 x 270 mm
SAFETY INSTRUCTION
The product is intended for internal use. The product has overload, overvoltage and short circuit protection. Use
the product in dry areas and never outdoors. To maintain safety and comply with the intended use (CE), the
product cannot be rebuilt and / or modified. When using the product for purposes not described above, it may
be damaged. In addition, improper use can cause hazards such as short circuit, fire and electric shock. Read
and follow these operating instructions carefully. Please make this product available to others people only with
this manual. This product complies with national and European statutory requirements. All company and
product names are trademarks of their respective owners. All rights reserved.
1. Do not use the shredder in a damp environment or touch the device with wet hands.
2. Never use the product immediately after moving from cold to warm place.
3. The product becomes hot during use. Ensure adequate ventilation and never cover the product when in use.
4. The device is not a toy. Keep them out of the reach of children and pets.
5. If into shredder gets tie, hair or shawl disconnect it immediately from the power source.
6. Do not place your hand too close to the slot.
7. Protect the product from extreme temperatures, direct sunlight, strong vibrations, high humidity,
inflammable gases, vapors and solvents.
8. If it is not possible to continue to operate the product safely, it must be removed from use and protected
against re-use. Ensuring further, safe operation is not possible if the product:
- is apparently damaged,
- does not work properly,
- it was stored in a long time under adverse environmental conditions or has been subjected to heavy
transport loads.
9. Handle the product carefully. Shock, knock, or fall, even at low altitudes, can cause product damage.
10. Observe the safety instructions and use of all other equipment used in connection with the product.
11. Cables should always be laid in such a way that nobody can stumble over them or get stuck in it. It could
minimize the danger of injury.
12. For safety reasons, disconnect the shredder from the wall outlet during a thunderstorm.
13. Never disconnect the cable from the power outlet by pulling the cable. Always pull it out using the handles
provided.
14. Do not touch the shredder if it is damaged. First turn off the power at the appropriate power outlet
(e.g. with a suitable fuse) and then carefully pull out the shredder from the mains socket. Never use the
product if the power cord is damaged.
15. To avoid a danger, the damaged power cord may only be replaced by the manufacturer, an authorized
service workshop or a suitably qualified person.
16. Make sure that the cable is not crushed, bent, damaged by sharp edges or subjected to mechanical stress.
Avoid excessive thermal loads exerted on the cable by extremely low or high temperatures. Do not modify
the power cable. Otherwise, the cable may be damaged. A damaged cable can cause fatal electric shock.
17. If you have any questions regarding the correct connection of the product or service or other types of
questions not included in this manual, please do not hesitate to contact our technical support or
a specialist from another company.
WARNINGS
1. When using the shredder, special attention should be paid to the fingers do not get into the gap, decorative
elements and hanging clothing, tie, hair or other elements that can get into the paper slot.
2. The shredder is used for destroy paper, do not destroy other materials, such as foils, laminated documents,
photos, staples, paper clips, X-rays, cartons, self-adhesive labels, credit cards, CDs, newspapers.
3. Do not shredding damp or wet paper.
4. To maintain the correct operation of the shredder, do not place more than 5 sheets of paper because it may
damage the device that is not covered by the warranty.
EN PL
Product specificaties
| Merk: | Natec |
| Categorie: | Papiervernietiger |
| Model: | Beaver Home NSH-1316 |
Heb je hulp nodig?
Als je hulp nodig hebt met Natec Beaver Home NSH-1316 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Papiervernietiger Natec
15 Juli 2025
Handleiding Papiervernietiger
- Lervia
- Acco-Rexel
- Exibel
- Insignia
- Conrad
- Honeywell
- Nedis
- Marquant
- Overmax
- HSM
- D-Mail
- Acco
- Ednet
- Royal Sovereign
- Sencor
Nieuwste handleidingen voor Papiervernietiger
6 Juli 2025
5 Juli 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
14 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025