Mvision HD100S Handleiding

Mvision Digitale decoders tuners HD100S

Lees hieronder de 📖 handleiding in het Nederlandse voor Mvision HD100S (50 pagina's) in de categorie Digitale decoders tuners. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/50
SAFETY PRECAUTION
CAUTION:
The lightening flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to "dangerous voltage"
and to prevent from a risk
of electric shock.
Warning:
To reduce the risk of
electric shock, don't open
the cabinet. Refer
servicing to qualified
personnel only.
The exclamation point
within an equilateral
triangle is intended to
alert the user to important
operating and
maintenance (servicing).
WARNING: The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not place naked flame sources, such as lighted candles on the
apparatus; otherwise, there is the danger of fire.
WARNING: The unit should be connected to a power supply only of the type
descry bed in the operating instructions or as marked on the unit. If you are not
sure of the type of power supply (for example: 120 or 230V) to your home,
consult your local dealer or local power company.
WARNING: Do not open the cabinet or touch any parts in the inner mechanism.
Consult your local dealer for technical service if the opening is required.
WARNING: The mains plug is used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING: Take attention to the environmental aspects of battery disposal. The
battery of remote control should not be exposed excessive heat such as
sunshine, fire or the like.
WARNING: Maintenance man must use the appointed screw in the rear plate.
WARNING: Ensure a minimum distance of 5 cm around the apparatus for
sufficient ventilation.
WARNING: Ensure that the ventilation is not impeded by covering the
ventilation openings with items such as newspapers, table-cloths, curtains, etc.
WARNING: Use the apparatus only in moderate climates (not in tropical
climates).
Note: Do not open the cabinet to avoid the unit direct exposure to radiation.
Unit Cleaning:
A
fter the unit power is turned off, you can clean the cabinet,
panel and remote control with a soft cloth lightly moistened with a mild detergent
solution.
Attachments: Never add any attachments and/or equipment without the
manufacturer consent; as such additions may result in the risk of fire, electric
shock or other personal injury.
Locating: Slots and openings in the cabinet are provided for ventilation to
protect it from overheating. Do not block these openings or allow them to be
blocked by placing the STB on a bed, sofa or other similar surface, nor should it
be placed over a radiator or heat register.
Power-Cord Protection: Place the power-supply cord out of the way, where it
will not be walked on. Please take special attentions to cords at plugs,
convenience receptacles and the point where they exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this STB through
openings, as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill any liquid on the STB.
Note: Moisture may be formed inside the unit in the following conditions:
When the unit is suddenly moved from a cold environment or an air-condition
room to a warm place.
Immediately after a heater has been turned on.
In a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To correct this
problem, turn on the power and wait about two hours for the moisture to
evaporate.
Parts Replacement: When the unit parts need to be replaced, user should
make sure the service technician use the replacement parts specified by the
manufacturer or having the same characteristics as the original part.
Unauthorized replacement may put the unit in the risk of fire, electric shock or
other hazards.
Safety Check: After all the maintenances and repairs are done, user is required
to request the service technician to conduct the overall safety check to ensure
the machine is in the proper condition.
Dolby Digital Audio Coding System
All products must be marked with:
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Additionally, software products running on a computer must also be marked
with:
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All
rights reserved.

Product specificaties

Merk: Mvision
Categorie: Digitale decoders tuners
Model: HD100S

Heb je hulp nodig?

Als je hulp nodig hebt met Mvision HD100S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Digitale decoders tuners Mvision

Mvision

Mvision S5 Handleiding

29 Oktober 2022
Mvision

Mvision S4 Handleiding

29 Oktober 2022
Mvision

Mvision HD400T Handleiding

28 Oktober 2022
Mvision

Mvision HD450T Handleiding

29 Oktober 2022
Mvision

Mvision HD300T Handleiding

29 Oktober 2022
Mvision

Mvision HD260 Handleiding

28 Oktober 2022
Mvision

Mvision HD400S Handleiding

28 Oktober 2022
Mvision

Mvision HD300 Combo Handleiding

29 Oktober 2022
Mvision

Mvision STX-5 USB Handleiding

29 Oktober 2022
Mvision

Mvision S3 Handleiding

28 Oktober 2022

Handleiding Digitale decoders tuners

Nieuwste handleidingen voor Digitale decoders tuners

Aston

Aston xena 1700 Handleiding

16 Oktober 2023
Aston

Aston Simba 201 Handleiding

16 Oktober 2023
Aston

Aston xena 2000 Handleiding

16 Oktober 2023
Topfield

Topfield TF-3000CI Handleiding

1 Oktober 2023
Lyngbox

Lyngbox LB-1ST Handleiding

4 Oktober 2023
Topfield

Topfield tf 6000 cot Handleiding

1 Oktober 2023
Topfield

Topfield tf 4000 fe Handleiding

1 Oktober 2023
Topfield

Topfield tf 3000 cot d Handleiding

1 Oktober 2023
Topfield

Topfield tf600pvrc Handleiding

1 Oktober 2023
Topfield

Topfield TF5300K Handleiding

1 Oktober 2023