Muller 873010 Handleiding

Bekijk gratis de handleiding van Muller 873010 (1 pagina’s), behorend tot de categorie Dimmer. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.4 sterren uit 6 reviews. Heb je een vraag over Muller 873010 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BA 873010rlc N;DE,GB -23247- 2013.01-- V01 ED

INSTRUCTION MANUAL DIMMER [RLC]

Technical Features

Safetey instructions

Supply voltage

230 V, 50Hz

CAUTION!! DANGER OF LIFE / RISK OF FIRE AND ELECTRIC SHOCK!!









Installation and assembly of electrical equipment must be carried out only by professional electrician!









Connect the supply voltage/frequency as stated on the product!









Disconnect device from power supply for wiring and installation purposes! Check power supply is disconnected!









Defective devices have to be put out of service immediately!

Warranty void if housing opened by unauthorised person!

The electronic circuit is protected against a wide range of external influences.

Incorrect operating may occur if external influences exceed certain limits!

Installation and assembly of electrical equipment must be in accordance with local building and electrical codes!

Power consumption

3 VA

Suitable type of lamps

Incandescence and halogen lamps

LOAD

Incandescence, 230V Halogens &

LV Halogens with Electronic transformer

15 400– W

Halogens with Ferromagnetic

transformer

20 250– W

Max. number of pushbuttons

3 lighted pushbuttons & unlimited

non-lighted pushbuttons

Dimensions

45 x 45 x 12 mm

Weight

40 g

Important Note

Permitted ambient temperature

0º +40ºC…



When calculating the max. loads please take into account power dissipation of transformers:.

For conventional transformers ~ 20% power dissipation / For electronic transformers ~ 2% power dissipation



For all transformers and lamps, please take into accountthe specifications of the manufacturer !

Storage temperature

- 30º… +70ºC

Type of protection

IP20 according to

DIN EN 60529

Conformity with Standard

DIN EN 60669-2-1

Description / Installation / Operation

Wiring Diagram

Description



Small size dimmer, for flush- mounting (e.g. behind standard pushbutton)



For leading or trailing edge dimming.



Automatic detection of the load type.



Protected against overload and short -circuit. Builtin heat protection.



Controlled by pushbutton.



With or without memory.



Suitable for R, L & C loads:

- Incandescent & 230V halogen lamps (R)

- ) LV Halogen lamps with Ferromagnetic transformer (L

- LV Halogen lamps with Electronic transformer (LC)

For all transformers and lamps, please take into account the specifications of the manufacturer!

Installation

C AUTION! Do not connect different types of lamps / loads to the same dimmer!

1 Disconnect installation frompower supplyand cpower supply is disconnected heck that .

2 Install the dimmer according to the wiring diagram.

3 Make sure the loads are connectedproperand ly reconnect power supply. The lamps flicker.

(This indicates that the dimmer has done the automatic load type detection)

4 The dimmer is ready for use.

Operation



Press shortly the pushbutton to switch the lamps on and off!

=> Switch on „No Memswitches on with max. brightness.“ = Lamp(s)

=> (s) Switch on „Mem“ = Lampswitches on with the brightness of the last switch off



With a long press you can dim!

(*)Only for very inductive loads necessary

Example:

Product specificaties