Mtx Audio ThunderPro2 TP2400 Handleiding
Bekijk gratis de handleiding van Mtx Audio ThunderPro2 TP2400 (6 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.3 sterren uit 1.5 reviews. Heb je een vraag over Mtx Audio ThunderPro2 TP2400 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
TP1100 / TP1200 / TP2400
OWNER'S MANUAL
21A9526
©2010 MTX Audio. All rights reserved. MTX and Thunder are trademarks of Mitek Corporation.
1 Mitek Plaza • Winslow, IL • 61089 • mtx.com
TP SERIES SPEAKERS
Congratulations on your purchase of an excellent, high performance loudspeaker system
from MTX! We are confident that your purchase will bring you years of listening pleasure.
MTX’s TP speakers consists of single 10" and single or dual 12” woofers matched with our
Generation 2 X-radial designed horn loaded high frequency tweeter designed to provide uniform
sound dispersion, and coverage area, with excellent sound quality. Your speaker is designed to
perform equally well in many different applications, including low to mid level live sound reproduc
-
tion, public address, karaoke applications, or mobile entertainment. The long excursion woofer
and horn-loaded tweeter with high frequency protection circuitry make your TP speaker suitable
for voice or music.
Your speakers carrying handles, mounted to a strong, lightweight cabinet make it easily
portable to use anywhere you need it. The rugged corner braces allow for upright positioning
and interlock for secure stacking of multiple cabinets. The versatile 5-way binding posts and 1/4"
phone jack inputs make it easy to connect to any amplifier. You can use a single speaker for mono
or connect a pair to a stereo amplifier for a stereo pair. Some models are equipped with pole
mount cups to allow for stand mounting
WARNING: To avoid injury, DO NOT SUSPEND the enclosure.
AMPLIFIER CONSIDERATIONS
Your speaker system specifications list RMS power and Peak power ratings. Power
amplifiers are also typically rated using RMS power, which is an indication of the power level
an amplifier is able to continuously deliver to a loudspeaker without damage or distortion to
the amplifier. Consult your amplifier owners manual to confirm power output at the rated
impedance at which your amplifier will be operating with the speakers connected. These
ratings should be considered when selecting the best amplifier to power your system. For
general use, amplifier output should match or exceed the RMS rated power of the speaker
system.
WARNING: Overpowering could cause serious damage to the loudspeak-
er.
HOOK UP
Your TP speaker comes equipped with 5-way binding posts and 1/4” phone jack for
easy connection depending on your needs.
CAUTION: Be sure your amplifier is turned off before you make any wire
connections.
5-Way Binding Posts
Use color coded, two conductor or stranded, twisted pair wire to connect your speaker
to an amplifier using the 5-way binding posts. Each has two individual conductors covered
with insulation, and are often marked to help you make the proper connections. Insulation on
one side of the wire might have a ridge or colored stripe. Or, the two conductors may have
different color insulation (red and black, for example). Be sure to connect (+) on the speaker
to (+) on the amp, and (-) on the speaker to (-) on the amp.
1) Separate the conductors at each end for about two
inches.
2) Strip away 1/2” of insulation from the end of each
conductor.
3) Unscrew the positive (+) terminal and insert the (+)
stripped end of a conductor wire into the hole on the
side of the terminal post.
4) Hand tighten the terminal to secure the wire in
place.
5) Connect the conductor wires other stripped end to
the amplifiers (+) terminal.
6) Repeat steps 3-5 to connect the speaker to the
amplifier’s negative (-) terminals.
2 inches
1/2 inch
Warranty Statement
MTX products purchased in the USA from an authorized MTX dealer are guaranteed
against defects in material and workmanship for a period of FIVE YEARS, the warranty
period begins the day the product is purchased by the end user. This warranty is limited to
the original retail purchaser of the product. Product found to be defective during that period
will be repaired or replaced by MTX at no charge. This warranty is void if it is
determined that
unauthorized parties have attempted repairs or alterations of any nature. Warranty does not
extend to cosmetics or finish. Before presuming a defect is present in the product, be certain
that all related equipment and wiring is functioning properly. MTX disclaims any liability for
other incurred damages resulting from product defects. Any expenses in the removal and
reinstallation of products are not covered by this warranty. MTX's total liability will not exce
ed
the purchase price of the product. If a defect is present, your authorized MTX dealer may be
able to effect repairs.
Proof of purchase is required when requesting service, so please retain your sales
receipt and take a moment to register your product on line at mtx.com. Also, a Return
Authorization number (RA) is required before shipping product back to MTX, call 800-556
-
2888 or 608-325-5560 for speaker RA's.
1/4” Phone Jack
Instead of using the speaker’s terminal posts, you can use the 1/4” phone jack to make
the connection. If your amplifier has an 8 ohm phone jack, you can use speaker cable that
has a phone plug on each end to connect the speaker’s 1/4" jack to the amps phone jack.
Or, if your amplifier does not have an 8 ohm phone jack, you can use speaker wire that has
a phone plug on one end to connect your speakers 1/4" jack, and stripped ends to connect
to your amplifiers output terminals.
Connecting two speakers to a STEREO amplifier
You can connect two TP speakers to a stereo amplifier for stereo sound. Connect one
speaker’s positive (+) and negative (-) terminals to the amplifier’s corresponding positive and
negative left speaker terminals. Connect the other speaker’s terminals to the corresponding
right speaker terminals.
NOTE: For best bass response, it is extremely important to con-
nect (+) on the speaker to (+) on the amp, and (-) on the speaker to (-) on the amp
.
225 Watts RMS/450 Watts Peak Power
Frequency Response: 30Hz-22kHz
4 Ohm
TP212
225 Watts RMS/450 Watts Peak Power
Frequency Response: 30Hz-22kHz
4 Ohm
TP212
SPEAKER OUTPUTS
-RIGHT+ -LEFT+
High Frequency Protection Circuit
Your TP speaker is equipped with high frequency protection circuitry, which is designed
to protect your speaker’s tweeter from accidental overpowering. The protection circuit is
designed to “turn on” when the signal (music) being sent to the speaker is reaching levels
that could cause serious damage. There will be a noticeable reduction in your speaker’s
high frequency output, which lets you know that the protection circuitry is working. When
the music level is reduced to a safe level, the speaker will automatically return to normal
operation.
Prises de casque 1/4”
À la place des bornes serre-fils de l’enceinte, le raccordement peut être effectué à l’aide de la
prise de casque 1/4”. Si l’amplificateur dispose d’une prise de casque 8 ohms, vous pouvez raccorder
l’enceinte à l’amplificateur à l’aide d’un câble muni d’une fiche de casque 1/4” à chaque extrémité.
Si l’amplificateur ne dispose pas d’une prise de casque 8 ohms, vous pouvez raccorder l’enceinte à
l’amplificateur à l’aide d’un câble de haut-parleur muni d’une fiche de casque 1/4” du côté de l’enceinte
et dénudé à l’autre extrémité.
Raccordement de deux enceintes à un amplificateur STÉRÉO
Vous pouvez raccorder deux enceintes TP Haut-parleurs à un amplificateur stéréophonique afin
d’obtenir un son stéréo. Raccordez les bornes positive (+) et négative (-) d’une enceinte aux bornes posi
-
tive et négative correspondantes de la voie gauche de l’amplificateur. Raccordez les bornes de l’autre
enceinte aux bornes correspondantes de la voie droite de l’amplificateur.
REMARQUE: Pour optimiser
la réponse des graves, il est extrêmement important de raccorder le (+) de l’enceinte au (+) de
l’amplificateur et le (-) de l’enceinte au (-) de l’amplificateur.
225 Watts RMS/450 Watts Peak Power
Frequency Response: 30Hz-22kHz
4 Ohm
TP212
225 Watts RMS/450 Watts Peak Power
Frequency Response: 30Hz-22kHz
4 Ohm
TP212
SPEAKER OUTPUTS
-RIGHT+ -LEFT+
Circuit de protection contre les hautes fréquences
L’enceinte TP Haut-parleurs est équipée d’un circuit de protection contre les hautes fréquences,
conçu pour protéger le haut-parleur d’aigus contre une puissance excessive accidentelle. Ce circuit de
protection est conçu pour s’activer lorsque le signal (musical) envoyé à l’enceinte atteint des niveaux
pouvant entraîner des dégâts importants. Le niveau de sortie haute fréquence de l’enceinte est alors
notablement réduit : cela indique que le circuit de protection fonctionne. Une fois le niveau musical réduit
à un niveau acceptable, l’enceinte reprend automatiquement son fonctionnement normal.
Prises de casque 1/4”
Amplificateur ou récepteur stéréo
ENGLISH
Product specificaties
| Merk: | Mtx Audio |
| Categorie: | Speaker |
| Model: | ThunderPro2 TP2400 |
Heb je hulp nodig?
Als je hulp nodig hebt met Mtx Audio ThunderPro2 TP2400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Mtx Audio
8 Mei 2025
8 Mei 2025
8 Mei 2025
8 Mei 2025
8 Mei 2025
8 Mei 2025
8 Mei 2025
8 Mei 2025
24 Juni 2023
21 Juni 2023
Handleiding Speaker
- Savio
- Martin
- XLEADER
- Nikkei
- Markbass
- Heco
- Edwards Signaling
- Genesis
- RetroSound
- AQL
- MONDO
- Tristar
- Cabstone
- Loewe
- KRK
Nieuwste handleidingen voor Speaker
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025