Moxa NPort 6250-S-SC Handleiding

Moxa Server NPort 6250-S-SC

Lees hieronder de 📖 handleiding in het Nederlandse voor Moxa NPort 6250-S-SC (6 pagina's) in de categorie Server. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

P/N: 1802061500019

*1802061500019*

NPort 6150/6250 Series

Quick Installation Guide

Vers 21ion 11.1 , January 20

Technical Support Contact Information

www.moxa.com/support



. A 2021 Moxa Inc ll rights reserved.

- - 2

Overview

The NPort 6150/6250 Series secure serial device servers provide reliable

serial- -to Ethernet connectivity for a wide range of serial devices. The

NPort 6150/6250 support TCP Server, TCP Client, UDP, and

Pair-Connection operation modes to ensure the compatibility of network

software. In addition, the NPort 6150/6250 also support Secure TCP

Server, Secure TCP Client, Secure Pair- Connection, and Secure Real COM

modes for security critical applications such as banking, telecom, access

control, and remote site management.

Package Checklist

Before installing an NPort 6150/6250 secure device server, verify that the

package contains the following items:

• 2 NPort 6150 or NPort 6 50

• a ( - Power dapter does not apply to T models)

• w - 2 all mount ears

• Documentation

• i g Quick nstallation uide (this guide)

• ca Warranty rd

Optional Accessories

• - -r DK 35A: DIN ail mounting kit (35 mm)

• - - - CBL RJ45M9 150: 8 pin RJ45 to male DB9 cable

• - - - CBL RJ45M25 150: 8 pin RJ45 to male DB25 cable

NOTE: Please notify your sales representative if any of the above items

are missing or damaged.

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is out of this

range, please use

a power adapter supplied by UL Listed External Power Supply

(The power output meets SELV and LPS and rated 12

to 48 VDC

;

the minimum current is 0.43 A).

Hardware Introduction

NPort 6150

- - 3

NPort 6250

Reset Button—Press the Reset Button continuously for 5 sec to load

factory defaults. Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to blink

on and off. The factory defaults will be loaded once the Ready LED stops

blinking (after about 5 seconds). At this point, you should release the

reset button.

LED Indicators

LED Name

LED Color

LED Function

PWR

Red

Power is being supplied to the power input.

Ready

R ed

Steady on

Power is on and the NPort is

booting up.

Blinking

Indicates an IP conflict, or, the

DHCP or BOOTP server did not

respond properly or a relay

output occurred. Check the relay

output first. If after resolving the

relay output the RDY LED is still

blinking, then there is an IP

conflict, or the DHCP or BOOTP

server did not respond properly.

G reen

Steady on

Power is on and the NPort is

functioning normally.

Blinking The device server has been

located by the Administrator’s

Location function.

Off

Power is off, or power error condition exists.

Link

Orange

10 Mbps Ethernet connection

G reen

100 Mbps Ethernet connection

O ff

Ethernet cable is disconnected, or has a short.

P1 , P2

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off

No data is being transmitted or received

through the serial port.

Product specificaties

Merk:	Moxa
Categorie:	Server
Model:	NPort 6250-S-SC
Gewicht:	730 g
Soort serieële aansluiting:	RS-232/422/485
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC
Ingangsspanning:	12 - 48 V
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Ondersteunde beveiligingsalgoritmen:	3DES, 802.1x RADIUS, DES, HTTPS, SSH, SSL/TLS
Temperatuur bij opslag:	-20 - 85 °C
Compatibele besturingssystemen:	Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64;\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Ondersteunde netwerkprotocollen:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, ARP, PPPoE, DDNS
Veiligheid:	UL (UL60950-1), TÜV (EN60950-1)
Afmetingen (B x D x H):	89 x 111 x 28 mm
Seriële poort(en):	2
Beheerprotocollen:	SNMP V1/V2c/V3
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Isolatie:	1.5 kV
Connectivity LEDs:	7
Overspanningsbeveiliging in voltage:	0.5 kV