Mount-It! MI-7172 Handleiding


Bekijk gratis de handleiding van Mount-It! MI-7172 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.4 sterren uit 13.5 reviews. Heb je een vraag over Mount-It! MI-7172 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
DELUXE GAMING CPU MOUNT
WITH SLIDING TRACK
MI-7172
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
Mount and Accessories
4
• Partially install 2 Screws (#F) into the drilled locations, leaving a gap of approximately 1/10” (3mm)
between the desk and the bottom of the screw head. Place the Under Desk Mount (#B) over the two
screws and slide the mount so that the screws are resting in the smaller end of the keyhole slots.
Attach the Mount
Step 2
Step 3
• Hold the Under Desk Mount (#B) underneath the desk in the desired location. Ensure adequate depth
from the edges of the desk to accommodate the dimensions of your PC case. Using a pencil mark the
center of the smaller end of the 2 keyhole shaped screw slots as shown here. Remove the desk mount
and drill a hole in the marked location using a 1/8” (3mm) drill bit to a depth of 0.6” (16mm).
Prepare the Mounting Surface
Step 1


Product specificaties

Merk: Mount-It!
Categorie: Niet gecategoriseerd
Model: MI-7172

Heb je hulp nodig?

Als je hulp nodig hebt met Mount-It! MI-7172 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden