Motorola ROKR 820 Handleiding

Motorola Speaker ROKR 820

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola ROKR 820 (50 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/50

Model: ROKR 820

QUICK START GUIDE / SNELSTARTGIDS / GUIDE DE DÉMARRAGE

RAPIDE / KURZANLEITUNG / SKRÓCONA INSTRUKCJA OBSŁUGI /

PŘÍRUČKA PRO RYCHLÉ POUŽITÍ / PRÍRUČKA RÝCHLYM

SPUSTENÍM / GUÍA DE INICIO RÁPIDO / GUIDA RAPIDA

ALL'AVVIO / HURTIG START GUIDE / GUIA DE INÍCIO RÁPIDO /

SNABBSTARTSGUIDE / HIZLI BAŞLANGIÇ KILAVUZU / КРАТКОЕ

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ / КОРОТКЕ КЕРІВНИЦТВО

КОРИСТУВАЧА / 快速入门指南 / / 快速入門指南クイックスタートガイ

ド / 빠른 시작 안내서

English (EN)

1. INTRODUCTION

Congratulations on your purchase! This manual includes information about “ ” Bluetooth Party Speaker. We ROKR 820

encourage you to take a few minutes to read this manual, which describes the product and includes step-by-step

instructions to help you to set up and get started. Read and understand all the safety instructions before using your

product.

2. WHAT’S IN THE BOX

1) Mainunit

2) DC adaptor

3) Aux cable

4) microphone

5) User manual

3. PRODUCT OVERVIEW

1 53 7

9 11 13 15

10 12 14

2 4 6

1) Mic volume -/+

2) USB port

3) Volume -/+ knob

4) Aux in jack

5) Mic 1 jack

6) Mic 2 Jack

7) Echo -/+

8) Power and Mode(BT/FM/USB/AUX)

9) Light control button

10) Bluetooth button

11) EQ / TWS button

12) Skip -

13) Play/Pause

14) Skip +

15) Bass boost

16) LED Display

17) Handle

18) DC jack (12V/1.5A)

4. POWER/CHARGING

1) Connect the DC pin of the DC adaptor into the speaker’s DC in charging port. Connect the other end of the adaptor

to an external power source. It takes about 6-8 hours to fully charge the speaker.

2) Press and hold the Power button 0

3 second to turn on the speaker.

3) Press the power button 0 3 seconds to turn off the speaker.

4) When powered on you can use this speaker as a battery charger for your rechargeable USB devices.

Connect your USB device to the USB port on the top of this Speaker.

The speaker is powered by the built-in rechargeable battery. After power-on, the display shows the battery level

immediately, you can check the status of the Speaker battery by display.

STANDBY MODE

The product will enter into sleep mode after 15 minutes without operation.

• If the Speaker is powered by the battery, it will auto power off if no action for 15 minutes.

• If the Speaker powered by AC or DC power source, the product will enter standby(Off) mode if no action for 15

minutes.

5. BLUETOOTH CONNECTION

You can use your Speaker “ ” as an external speaker for your Bluetooth enabled smartphone or tablet. ROKR 820

1) Press Mode button to set to Bluetooth mode, or press button to direct to Bluetooth pairing mode. (you can Press

and hold the Play/Pause button to erase the previous connectings).

2) Choose “ on your mobile device to connect. ROKR 820"

3) Once successfully connected, audio will stream from your Bluetooth device to this speaker.

NOTES:

• This speaker can memorize a maximum of 8 paired devices. The ninth paired device will replace the first one.

• The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet).

• If a PIN code is requested while connecting a Bluetooth device, enter “0000”.

• Bluetooth performance can be affected by the distance between this product and your Bluetooth device and the

environment of operation.

TO TERMINATE THE BLUETOOTH-ENABLED DEVICE:

• Turn off this speaker;

• Disable Bluetooth on your device;

• Move this speaker beyond the Bluetooth operational range.

TO RECONNECT THE BLUETOOTH-ENABLED DEVICE:

• When you turn on this speaker next time, it will reconnect to the last connected device automatically;

• If not, manually select “ on your Bluetooth device to start a connection.ROKR 820"

TWS MODE

Use two “ speakers can connect to each other in TWS mode. ROKR 820"

1) Press and hold the TWS button of either speaker for 3 seconds, then release, TWS connection will be made with the

master speaker. By default, the speaker which connected to your smartphone is the master speaker (R channel), the

other one is the slave speaker (L channel).

2) In TWS mode, press and hold the TWS button for 3 seconds on either speaker or power off the speaker to exit the

TWS mode.

Product specificaties

Merk:	Motorola
Categorie:	Speaker
Model:	ROKR 820

Heb je hulp nodig?

Als je hulp nodig hebt met Motorola ROKR 820 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Motorola

Motorola ROKR 800 Handleiding

26 Februari 2024

Motorola ROKR 820 Handleiding

26 Februari 2024

Motorola MD100X Handleiding

20 Januari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024