Motorola Polaroid Insta-Share Printer Handleiding
Motorola
Niet gecategoriseerd
Polaroid Insta-Share Printer
Bekijk gratis de handleiding van Motorola Polaroid Insta-Share Printer (144 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 281 mensen en kreeg gemiddeld 4.7 sterren uit 141 reviews. Heb je een vraag over Motorola Polaroid Insta-Share Printer of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/144
Let's get started
We'll guide you through attaching and using your Polaroid Insta-Share Printer Moto Mod™.
In this guide:
• “Attach and remove your Moto Mod”
• “Charge your Insta-Share Printer”
• “Load paper into your Insta-Share Printer”
• “Take a photo”
• “Print your photo”
• “Print a saved photo”
• “Print a photo from another app”
• “Peel and stick your photo”
• “Want more?”
Attach and remove your Moto Mod
Align the sides of your phone with the sides of the Moto Mod until they snap together.
When connected, you will feel a vibration, see a message on your screen and hear
asound.
Note: make sure your phone's camera lens aligns with the hole in the Insta-Share Printer
and the connectors are clean and dry. Also, remove your phone case if you use one.
To remove your Insta-Share Printer, lift up from the bottom pick out area.
Caution: do not remove your Insta-Share Printer by pushing the phone's camera lens,
asthat could damage your phone.
INSTA-SHARE
PRINTER
1
MD100I
Charge your Insta-Share Printer
Note: the fastest way to charge your Moto Mod is to plug the charger into your Insta-
Share Printer.
To charge, connect your Insta-Share Printer to a power outlet with a USB-C cable.
Alternatively, charge your device by attaching it to your phone and charging your phone.
Note: fully charge your Moto Mod using the charger that came with your phone.
Usingother chargers with a USB-C connector is not recommended and can slow
chargespeed. Avoid incompatible USB-B (micro USB) chargers and uncertified
adaptersand cables, asthey may damage your device.
Charge levels
Press the battery check button to check the charge level. The LEDs indicate the charge level.
LEDs Charge %
4 75 to 100
3 50 to 74
2 25 to 49
1 0 to 24
Note: your Insta-Share Printer must be charged at least 20% (or 2 LED lights) in order to print.
Battery check
button
Product specificaties
| Merk: | Motorola |
| Categorie: | Niet gecategoriseerd |
| Model: | Polaroid Insta-Share Printer |
Heb je hulp nodig?
Als je hulp nodig hebt met Motorola Polaroid Insta-Share Printer stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Motorola
8 December 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
2 November 2024
26 Februari 2024
4 Juni 2023
23 Mei 2023
Handleiding Niet gecategoriseerd
- Deutz
- Performance Power
- Artsound
- Hasselblad
- Zuiver
- Kraftmax
- OOONO
- Marathon
- Crosley
- CAT
- BabyHome
- Oster
- Jonsered
- Furrion
- Basetech
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025