Morphy Richards ComfiGrip 300604 Handleiding

Bekijk gratis de handleiding van Morphy Richards ComfiGrip 300604 (6 pagina’s), behorend tot de categorie Strijkijzer. Deze gids werd als nuttig beoordeeld door 46 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Morphy Richards ComfiGrip 300604 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Dry ironing

Your iron can be used for dry ironing. Set the

steam switch

(2)

to ‘O’ and set the temperature

dial

(8)

as desired

(see ‘Temperature Guide’ on

page 3)

.

You won’t need water in the tank unless using

the water spray or steam boost features

.

Vertical steam

Vertical steam is useful for removing creases

from hanging clothes, curtains, etc. Hold the iron

between 1cm and 2cm away from the item and

press the steam boost button

(4).

No drip system

This prevents water escaping from the soleplate

(7)

when the iron is too cold.

During use, the no drip system may emit a loud

click, particularly during heat-up or whilst

cooling down. This is perfectly normal and

indicates that the system is functioning correctly

.

Life long anti-scale system (certain

models only)

This system reduces scale deposits and helps

prolong the life of the iron

.

Auto shut-off (certain models only)

The iron will automatically shut down if

stationary in the horizontal position for 1 minute,

or the vertical position for 8 minutes.

The auto shut-off indicator

(5)

will flash.

Gently shake the iron to reactivate. The

temperature indicator light

(9)

will come on. Wait

for the iron to heat-up and continue ironing

.

Features of your iron

9

5

5

To clean a stainless steel soleplate

We recommend using a generally available

gentle chrome, silver or stainless steel cleaner.

Always follow the manufacturer’s instructions.

To clean a coated soleplate

Do not use scouring powder or solution as this

could cause damage to the coating.

To clean either soleplate type

If any man-made fibres fuse to the soleplate (7),

set the iron at the 3-dot position for a stainless

steel soleplate, or MAX position for a coated

soleplate, and pass it over a clean piece of

cotton to draw the deposit off the surface.

To clean the exterior

Allow the unit to cool and wipe over with a damp

cloth and mild detergent, then wipe dry.

When you have finished ironing, unplug and

empty all water from your iron and set the steam

switch at the ‘O’ position. When cool, store the

iron on its heel with the cord wrapped loosely

around the heel.

Emptying and storingMaintenance

RN40625MUK Rev2_IB 04/03/2013 11:00 Page 1

Product specificaties