Morphy Richards Advanced Finish Perfect 300001 Handleiding

Bekijk gratis de handleiding van Morphy Richards Advanced Finish Perfect 300001 (6 pagina’s), behorend tot de categorie Strijkijzer. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Morphy Richards Advanced Finish Perfect 300001 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Dry ironing

Your iron can be used for dry ironing. Set the

steam switch

(2)

to ‘O’ and set the temperature

dial

(8)

as desired (see page 3).

You won’t need water in the tank unless using

the water spray or steam boost features

.

Vertical steam

Vertical steam is useful for removing creases

from hanging clothes, curtains, etc. Hold the iron

between 1cm and 2cm away from the item and

press the steam boost button

(4).

No drip system (certain models only)

This prevents water escaping from the soleplate

(6)

when the iron is too cold.

During use, the no drip system may emit a loud

click, particularly during heat-up or whilst

cooling down. This is perfectly normal and

indicates that the system is functioning correctly

.

Models without No drip system

Do not store the product with water in the tank

as water may leak from the soleplate

(6)

if you

forget to turn the steam switch

(2)

to ‘0’.

Remember to only turn the steam switch

(2)

to

steam when the control dial is set to a

temperature within the steam range.

Remember: the lower the temperature setting,

the lower the steam setting

.

Features of your iron

5

To clean a coated soleplate

Do not use scouring powder or solution as this

could cause damage to the coating.

In the unlikely event of any man-made fibre

fusing to the soleplate, set the iron at the 3-dot

position and pass it over a clean piece of cotton

which will draw the deposit off the surface.

IMPORTANT: Do not descale the soleplate with

descaling products, proprietary cleaning agents

or vinegar when flushing out the soleplate.

To clean the exterior

Allow the iron to cool and wipe over with a damp

cloth and mild detergent, then wipe with a dry

cloth.

When you have finished ironing, unplug and

empty all water from your iron and set the steam

switch at the ‘O’ position. When cool, store the

iron on its heel with the cord wrapped loosely

around the heel.

Emptying and storingMaintenance

RN40697MUK Rev6_IB 22/04/2013 14:12 Page 1

Product specificaties