Mooer Macro Power S12 Handleiding

Mooer Niet gecategoriseerd Macro Power S12

Lees hieronder de 📖 handleiding in het Nederlandse voor Mooer Macro Power S12 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
* PLEASE READ CAREFULLY BEFORE PROCEEDING *
PRECAUTIONS
Please read the following set up instructions carefully to ensure
that the input power is correct and it is in accordance with the
requirements of your country before using the MACRO POWER S12.
Improper set up will result in severe damage to the device itself.
Ensure you have set the power selection switch to the AC voltage
which corresponds with that of your AC outlet (220V-240V / 110V-120V).
Connect the power cord provided to begin using MACRO POWER
MAIN FEATURES
Dual toroidal transformers and enhanced filtering provide clean,
quiet power
12 isolated and truly independent 9V DC outputs
2 x 500mA
4 x 300mA (one with selectable Voltage)
6 x 200mA
A total of 3400mA output
Convenient switch to change the input A/C voltage for use in
different countries
ACCESSORIES
* Disclaimer: Any specification’s update won't be amended in this
manual.
6 x 460mm power cables
6 x 610mm power cables
1 x 200mm Polarity conversion cable (RED Connectors)
AC Power Cord
Velcro tape
Owner's Manual
Professional Pedalboard Power Supply
MOOER AUDIO CO.,LTD
www.mooeraudio.com
5
7
6
Power selection switch:
Selects the input AC voltage range 220V-240V or 110V-120V
Fuse Holder:
220V-240V = T200mA
110V-120V = T400mA
Power Socket:
Connect power chord provided to power on your
MACRO POWER S12
SPECIFICATIONS
* Note: The device has a T200mA fuse attached in the Fuse holder
before being shipped out of the factory.
MACRO POWER LAYOUT
1 x 300mA DC output with selectable voltage switch.
9V, 12V, 15V or 18V
1
2 x 500mA 9V DC outputs
3 x 300mA 9V DC outputs
2 3 4
6 x 200mA 9V DC outputs
Please read these connection instructions carefully.
Connecting your devices to the wrong output may result in damage
to your device.
CONNECTIONS
RULES FOR PEDAL POWER
Always check the power requirements of any pedal or device
you wish to connect to MACRO POWER S12. The following rules
always apply.
All of the outputs on MACRO POWER have a centre pin - polarity ( ).
Current (mA) must meet at least the stated minimum requirements of
your pedal or device.
More mA is perfectly safe and even encouraged. Less mA than the
minimum stated requirements may be insufficient for your pedal or
device to operate correctly but will not cause damage to your device.
Power Cable
If your device requires centre pin + ( ) then please use the included
polarity conversion cable.
Power Supply: 220V-240V / 110V-120V
Output voltage: 11 x independent isolated 9V DC
1 x independent isolated DC 9V - 18V
Current Output: Maximum total 3400mA output
Dimensions: 225mm(D)×88mm(W)×50mm(H)
Weight: 1.82kg
Part No:620010680
1
2
3
4
5
6
7
Voltage (V), DC / AC and Polarity ( / ) must always match
the requirements of your pedal or device exactly.


Product specificaties

Merk: Mooer
Categorie: Niet gecategoriseerd
Model: Macro Power S12

Heb je hulp nodig?

Als je hulp nodig hebt met Mooer Macro Power S12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Mooer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd