Monoprice MHD 10159 Handleiding

Monoprice Sportscam MHD 10159

Lees hieronder de 📖 handleiding in het Nederlandse voor Monoprice MHD 10159 (2 pagina's) in de categorie Sportscam. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

MHD Action Camera User Manual

Product ID: 10159

1. eatures FKey

• Record 1080pfull HD video up to resolution at 30 frames per second with audio

• Can record up to 3 hours of 1080p video on a 32GB MicroSD card (not included)

• 5 Capture still images with a 3, , or 16 megapixel resolution

• - - 3 The built in 1050mAh Li ion battery provides up to hours of continuous use

• Waterproof up to 10 meters depth without using any extra casing

2. Package Contents

Carefully unpack and ensure that you have the following items:the package

1 6 Camera B ody Mounting Clip Screw Key

2 7 Back Cover Mounting Clip Ball Joint

3 8 USB - A to mini B Cable Handlebar Mount

4 9 Security Strap Carry Pouch with Belt Loop

5 10 1/4"- 20 UNC Mounting Clip User Manual

3. Function al Parts

C amera Lens

High quality lens

LED I ndicator

Displays the camera status

3 Power / Shutter Button

1. Turns the camera on or off

2. Takes a single photograph

Record & Stop Slide Switch

Slide to start or stop video recording

Camera Cover Back

Rotate and lock to seal the camera

Tripod Socket

Standard 1/4" x 20 UNC attachment socket

Lanyard Through - Hole

Attachment point for security lanyard or strap

Cover Lock

Locks the back cover in place

Micro HDMI Port

Connect the camera to TV with an HDMI cable

10 Video Resolution Slide

Switch

Se F lect the video resolution: HD or HD

MicroSD Card Slot

Accepts a MicroSD card up to 32GB for storage

Reset

Resets the camera to the factory defaults

13 Mini USB Port

1. Connect to r for data transfer or a compute

camera setup

2. Charge the internal batterys

4 t . Using he Camera

4.1 Charging up Your Camera

Charge the camera by connecting it to a 5 VDC USB charging source. The red LED

illuminates to indicate the camera is charging and turns off as soon as the camera is fully

charged. It takes about 2 hours to fully charge the camera.

4 .2 Inserting a Memory Card

Insert a MicroSD card (not included) before using your camera. Ensure that the camera

power is turned OFF before inserting the card into the slot .or removing it

Notes

1. There is only one correct direction to insert the

MicroSD card into the slot. Do not force the card into

the card slot as it may damage both the camera and

the MicroSD card.

2. A new MicroSD card should be formatted before

using. For more information, please see section 5.

4 .3 Set up Date and Time

You can set the camera’s clock with the utility software to ensure that your video and photo

files are saved with the correct date/ time information.

To set up the camera clock

1. Connect the camera to your Windows or Mac computer using the supplied USB

cable.

2. Open the Windows or Mac software utility. Refer to section 5.2 for full details on how

to run the utility programs.

3. Locate the “Date and Time” options near the bottom of the window. Click the "Set"

button.

4. the Manually adjust the date and time or click “Sync with PC” button set the camera

to the same time as your PC.

5. Click “OK” to save the settings.

6. After you have made the change, immediately disconnect the camera from the PC.

This will cause the changes to take effect.

4 .4 Sealing Your Camera

The Waterproof Housing lets the camera perform at depths up

to 10 meters (about 30 feet) under water. You must seal the

camera with in order to protect the camera when B Cack over

using it in wet or moist conditions.

To secure the Back Cover

1. Attach the Back Cover to the back of the camera and

rotate clockwise the two dots are aligneduntil solid

2. Slide the latch on the Back Cover the lock to

position.

To open the back cover, slide the latch on the back cover

out of the "lock" position. Rotate the cover

counterclockwise until the hollow dot is aligned with the

solid dot.

Notes:

1. Failure to properly seal your camera can result in leaks that could damage or destroy

your camera. Your warranty does not cover water damage resulting from user error.

2. Cover The rubber seal on the Back forms the waterproof barrier to protect the

camera in wet and underwater conditions. You must keep this seal clean as even a

single strand of hair or grain of sand can cause a leak.

3. After every use in salt water, you will need to rinse the outside of the product and the

seal with non salt water and dry- it thoroughly. Failure to properly clean the camera

could cause corrosion in the product or failure in the seal, in turn, which would

damage the product.

4.5 Power On & Power Oﬀ

To power the camera ON :

Press and hold the button. The camera will vibrate and the Green LED will turn on.

To power the camera : OFF

Press and hold the button. The camera will vibrate for about two seconds and the

Green LED will turn oﬀ.

4.6 Recording Videos

Before starting any recording, select the video resolution 1080p 1920 1080) or 720p ( x

(1280x720) by switching the Video Resolution Switch. There are two ways to start video

recording. When starting a video recording a short vibration indicate, s recording has

commenced. The LED indicator illuminates RED throughout the recording.

1. Whether the camera power is ON or OFF, simply slide the switch towards the

camera front to start recording. The red REC mark will be visible and the LED will

glow red.

2. If your camera is OFF and the switch is already at the REC location, press

and hold the button to turn the camera ON and start recording.

Slide the switch backward to stop recording. You will see the green STOP mark,

the camera will vibrate, and the LED indicator will GREEN. The camera will then change to

automatically enter Standby mode.

Alternatively, you can simply hold the button for several seconds, which will stop the

recording and turn the camera off. The camera will vibrate for about two seconds and the

Red LED light will turn off.

Notes:

1. You cannot change the video resolution while recording is in progress.

2. There will be seconds delay before about a 2-3 the camera starts recording.

3. Ens ure there is sufficient memory available on the MicroSD card. If the card is full,

the camera will vibrate five seconds and the Green LED will flash continuously. for

4.7 Taking Photos

1. Power the button. on the camera by pressing

2. After the camera power has been turned on, press the button to take a photo. A

short vibration and a flash of the Green LED indicate the action was successful. that

Notes:

1. The Still Photo function is disabled during video recording.

2. If the card is full, the camera will vibrate for five seconds and the Green LED will flash

continuously.

4.8 Auto Rotation

The camera has in gyroscopic a built- sensor, which is able to detect the camera's

orientation. If the camera is mounted upside down, for example, the recording is rotated so

that it plays back with the proper orientation. This allows to mount you the camera in

different orientation without recording a rotated or inverted view. s

Notes

1. Auto Rotation only applies to video recording. Still photos use a fixed orientation.

2. The camera orientation will not change while recording is in progress. Ensure the

orientation is set properly before starting a recording.

3. You can disable the auto rotation function using the software utility.

5 . Connecting Your Camera

5 .1 Connecting Your Camera to a PC

The camera computer a can be connected to and be recognized as a mass storage device.

You can copy or delete photos and video files the same as you would any file on any drive

in your system.

1. the Press button to turn the camera on.

2. included Connect your camera to a PC using the USB cable.

Once the camera mass storage device, you can:has connected to the computer as a

1. by Open the MicroSD folder and rowse the files saved b the camera.

2. Format the MicroSD card.

3. Run the software utility (see section 5.2).

Note: If you are unsure of which mode you are in, unplug the camera, turn it on, then back

off again, then reconnect to the PC and try again.

5.2 Run the Software Utility

1. 10 Insert a MicroSD card with at least MB free space into your camera.

2. Connect your camera to a PC using the included USB cable.

3. Press the button to turn the camera on.

4. Open the MicroSD card folder with your computer's file manager and you will see the

ﬁles - ﬁle setting_win.exe and Doublesetting_mac.app. click the appropriate for the

operating system in use.

Using the software utility following camera settings:you can change the

1. Photo Resolution (3, 5, or 16 megapixels)

2. Photo Mode (Single, Burst, or Time Lapse)

3. TV Type (PAL or NTSC) (not used)

4. Frequency (50Hz or 60Hz) (not used)

5. ower A Puto O ) ff (Off, 1, or 2 minutes

6. Auto Rotation (Off or On)

7. Set Date and Time

Notes：

：

：：If you cannot locate the files for the software utility, ensure you have a MicroSD

card inserted and that it has at least 10MB free space. Unplug the camera from the PC,

turn it on and off then connect to the PC again.

5.3 Connecting Your Camera to a HDT or ReceiverV

You can connect your camera to a HDTV or AV receiver using a Micro HDMI cable (not

included). Once you are connected you can use the TV as a viewfinder while taking photos

or recording video content.

6. Mounting Your Camera

Your Monoprice Action Camera can be mounted in a variety of ways. The camera comes

with the basic mounting accessories, while additional mounting options can be purchased

separately.

6 .1 Security Strap

1. Loop one end of the security strap through the strap hole on the camer se a pin a. U to

help thread it through the hole, if necessary.

2. other Attach the end to the mount or to any other secure mounting point.

3. Clip both ends together when camera is mounted.the

6.2 Attach the Mounting Clip

1. Fit the 1/4" 20 - screw of the Mounting Clip to the tripod socket of the camera.

2. Tighten the screw until the Mounting Clip is securely attached to the camera.

6. Handlebar a 3 Mounting to s or Pole

1. Loosen both screws on the handlebar mount until it can be slipped over the pole.

2. Position the mount as desired then tighten the screws until the mount is solidly in

place.

3. Loosen the ball joint nut until it is almost free of the screw threads.

4. Insert the ball joint into the ball joint socket then tighten the nut.

5. Slide the Mounting Clip onto the base of the Mounting Clip Ball Joint.

6. The ball joint system allows the camera. Simply loosen you to change the angle of

the nut, adjust the camera angle, and re- tighten the nut.

7 . Troubleshooting

Problems

Causes

Solutions

1. LED flashes and

camera turns off

2. Cannot turn on the

camera

Battery is depleted Recharge the camera

Red LED flashes during

recording

Low battery Recharge the camera

Cannot take photos or

video (Green LED

flashes)

Memory card full

Delete unneeded files or

replace with a card with

sufficient available space

Cannot take photos or

video (Green and Red

LED flashes alternately)

1. MicroSD card is not

inserted

2. MicroSD card has not

been properly

formatted.

1. Insert a MicroSD card

2. Format the MicroSD card

using your PC or TV

Canno the t find

removable disk after

connecting the camera to

the computer

Connection failure

1. Make sure all cable

connections are secured

and restart the computer if

necessary.

2. Try a different USB port.

8. Specifications

Sensor

3/ ensor5 /16 Megapixel CMOS s

Lens

120º ultra wide angle field of view

Focus range

0.5m - ∞

Video

1080p: 1920x1080 pixels (16:9), 30 fps

720p: 1280x720 pixels (16:9), 30 fps

Format: H.264 compression, saved in .MOV container

Photo

16.0 ixel pMega s:(4608x3456)

5.0 pMega ixels: (2592x1944)

3.0 pMega ixels : (2048x1536)

Format: JPEG

Capture Modes: Single photo, Burst mode, Time lapse

Audio

Built- in high quality microphone

A DPCM Compression, Automatic Gain Control

Storage

MicroSD/MicroSDHC with minimum Class 6 (not included)

Average Recording Times: (using 32GB about hours 3

micro ) SD card at 108 fps0p/30

Connection

USB 2.0 (for data connection and battery charging)

Micro HDMI video output

Power

Built- - Battery in 1050 mAh Rechargeable Li ion

Battery Life: approximately ou 3 h rs

Housing

Durable plastic housing

Waterproof to u p to 30 feet / 10 meters depth

Dimension

3.8" x 1.6" x 1.8" (96.3 x 40 x 45.8 ) mm

Weight

4.0 oz (112.5g)

* If your existing video player does not play the files saved by this camera, download the

QuickTime Player from the Apple site.

9 . System Requirements

Operating system

Windows 10. or ® 7 ® ® XP SP3, Vista, Windows ; Mac OS X 5

later

CPU

Pentium better® III or

RAM At least 64MB

Interface

USB 2.0 port

10. Trademark Information

• Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.

• Pentium® is a registered trademark of Intel Corporation.

• s Apple, Mac, and Macintosh trademarkare of Apple Inc.

• QuickTime is a trademark of Apple Inc.

• MicroSD™ . is a trademark of the SD Association

• Other names and products may be trademarks or registered trademarks of their

respective owners.

IMPORTANT

• Keep the lens clean. Dirt and fingerprints will affect the quality of the

picture.

• Close the B C ack over properly to seal the camera against moisture. Do

not open it under water.

• Rinse the camera with clean water after use e and dry completely beit for

storage.

FCC Statement

Caution Statement

"Modifications not approved by the party responsible for compliance could void the user’s

authority to operate the equipment."

Instruction Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/ TV technician for help.

WARNING: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THE DEVICE. ANY

SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE

EQUIPMENT.

For EU only

Product specificaties

Merk:	Monoprice
Categorie:	Sportscam
Model:	MHD 10159

Heb je hulp nodig?

Als je hulp nodig hebt met Monoprice MHD 10159 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sportscam Monoprice

Monoprice PID 10629 Handleiding

5 Juli 2023

Monoprice MHD 10159 Handleiding

30 Juni 2023

Handleiding Sportscam

Nieuwste handleidingen voor Sportscam

Akaso Brave 8 Lite Handleiding

25 April 2024

CamOne Car V2 Handleiding

18 April 2024

SJCAM SJ8 Plus Handleiding

8 April 2024

Moultrie M-990i Handleiding

18 Maart 2024

SJCAM SJ11 Active Handleiding

13 Maart 2024

Conceptronic Cactioncam Handleiding

11 Maart 2024

Rexing P1 Handleiding

28 Februari 2024

Rexing A1 Handleiding

28 Februari 2024

EVOLVEO SportCam W8 Handleiding

17 Januari 2024

EVOLVEO SportCam X3 Handleiding

17 Januari 2024