Monogram ZIFS360NXLH Handleiding
Pagina's 5 Koelkast
Bekijk de handleiding van Monogram ZIFS360NXLH gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag
OVERALL DIMENSIONS
Product Specification Revised 9/14
ZIFS360NXLHGE Monogram
®
36" Built-In All-Freezer
36 3/4"
(93.4)
TOP VIEW
35" (89.0)
Case width
** Allow (10.2) min4"
clearance to a wall
for 90˚ door swing
**These units are equipped with a 2-position door stop. The factory set 130° door swing can
be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. Allow 15" minimum
clearance to wall for pan removal. If the 90˚ door stop position is used, pan access is
maintained but pan removal is restricted.
** Allow (63.5) min25"
clearance for 130˚
door swing
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width36" (91.4 cm)
Overall Height84" (213.4 cm)
Overall Depth25 3/4" (65.41 cm)
Door Clearance36 3/4" (93.4 cm)
Cutout Width35 1/2" (90.2 cm)
Cutout Height83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth24" (61 cm)
Plumbing Requirements1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight569 lb
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimension may vary due to manufacturing tolerances.
36" (91.5)
25 3/4"(65.4)
23 7/8" (60.7)
*84"
(213.4)
2 3/4"
(7.0)
*73 1/4"
(186.1)
*3 1/2"
(8.9)
*83 1/2"
(212.1)
64 1/4"
(163.2)
*6 1/2"
(16.5)
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
STANDARD INSTALLATION
ANTI-TIP BRACKET
Product Specification Revised 9/14
W
24"(61.0)
2"
(5.1)
4"
(10.2)
7/16"
(1.1)
Trim overlap
3 1/2"
(8.9)
ELEC.
35 1/2"(90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75
1/2
"
(191.8)
From floor
to bottom
of electrical
area
5 1/2"
(14.0)
9"
(22.9)
5"
(12.7)
5"
(12.7)
WATER
3 1/2"
(9.0)
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
81 1/2"
(207.00)
Use two
additional hole
locations at end
of brackets
Wall
Studs
Screws
mounted
into vertical
wall studs
C
Make sure
holes selected
are centered
on the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
A
GE Monogram
®
36" Built-In All-FreezerZIFS360NXLH
A
Mounting the junction
box in this location will
also allow for front
accessability through
access panel.
B
Water supply area.
WARNING:
The freezer is top heavy
and must be secured to
prevent the possibility of
tipping forward. Failure to
do so may result in death
or serious injury.
The information below is
for cabinet design only.
When installing the anti-
tip system you must use
the product installation
instructions.
The information below
applies to all installation
constructions:
• A wall bracket, bolts and
toggles will be supplied
with the unit.
• The bolts will be used to
attach bracket to wall in
4 locations. Two of the
locations must penetrate
the center of the wall
studs.
• The toggles are used for
stability in drywall and
when metal studs are
encountered. Lag bolts
are used in wood studs.
• In installation opening,
measure 81 ½” from
floor and draw a
horizontal line.
• Locate and mark the wall
studs on horizontal line.
Verify at least two studs
have their centerlines
within the center 32.5”
of installation opening to
ensure 2 wall studs are
penetrated.
• The bracket will be
centered left to right in
opening with bottom of
bracket on the horizontal
line.
• When unit is placed in
opening, the bracket tabs
will align with openings
in back of the unit. The
unit will be secured to the
bracket using supplied
“L” bolts.
See Installation
Instructions for detailed
instructions.
NOTES
B
NOTES
Product Specification Revised 9/14
GE Monogram
®
36" Built-In All-FreezerZIFS360NXLH
CUSTOM SIDE PANELS
F
Side panels must be
used whenever the
sides of the freezer will
be exposed. The 1/4”
side panels will slip
into the side case trim.
Secure the panels to the
freezer with stick-on
hook and loop fastener
strips. Order the side
panels from the cabinet
manufacturer.
F
2 9/16"
(6.5)
*3" - 4"
(7.6 - 10.2)
*Depending
on installation
height
1 7/8"
(4.8)
24" (61.0)
3/16"
(.5)
*”
(2)
*Deing
on ination
*84"
(213.4)
*Depending
on installation
height
Product specificaties
| Merk: | Monogram |
| Categorie: | Koelkast |
| Model: | ZIFS360NXLH |
Heb je hulp nodig?
Als je hulp nodig hebt met Monogram ZIFS360NXLH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden