Monitor Audio IWA-250 Handleiding

Monitor Audio Receiver IWA-250

Lees hieronder de 📖 handleiding in het Nederlandse voor Monitor Audio IWA-250 (16 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

o w n e r s m a n u a l

0>(

monitoraudio.com 1

Contents

Introduction

Thank you for your purchase of the IWA-250 subwoofer ampliﬁer, which has been designed and

constructed using quality systems and materials to provide years of enjoyment, reliability and pride

of ownership.

Music is and should be a natural enhancement of life. It stimulates the imagination, changes your

mood, helps you relax, and provides endless hours of entertainment. At Monitor Audio we pride

ourselves in attempting to make the listening experience as close as possible to the original ‘music’

production.

Please read through this manual to familiarise yourself with any safety advice and how to set up

your subwoofer ampliﬁer to achieve the very best listening experience.

Please retain this manual for future reference.

ENGLISH

Contents 1

Introduction 1

Installation 2

Fitting Rubber Feet 2

Fitting to Rack 2

Initial Set Up 3

Set Up 3

Amp Panel & Controls 4

Speciﬁcations 6

Trouble Shooting 7

Owner Information 7

IWA-2502

Installation

Leave the ampliﬁer unplugged from the mains until the installation procedure is

completed.

If you are going to mount the ampliﬁer on a shelf/ cabinet, ﬁt the self adhesive rubber feet (illustrated

below). If you are rack mounting it, please refer to the next section.

Fitting Rubber Feet

Fitting to Rack

If installing in a rack or communications cabinet, you need to ﬁt the supplied brackets ﬁrst.

NOTE: When ﬁtting to a rack, please ensure there is space above and below to allow

for suitable airﬂow.

Product specificaties

Merk:	Monitor Audio
Categorie:	Receiver
Model:	IWA-250
Kleur van het product:	Zwart
Gewicht:	4000 g
Breedte:	432 mm
Diepte:	263 mm
Hoogte:	43.7 mm
Connectiviteitstechnologie:	Bedraad
Stroomverbruik (in standby):	0.5 W
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	40 - 120 Hz
Signaal/ruis-verhouding:	25 dB
Totale harmonische vervorming (THD):	1 procent
Rackcapaciteit:	1U
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50-60 Hz
Stroomverbruik (typisch):	200 W
Input sensitiviteit:	3.5 mV
Crossover frequentie:	25 Hz
Piekvermogen per kanaal:	250 W
Synchronisatie ingangsimpedantie:	20000 Ohm
Versterker klasse:	D
Speakers connectiviteit type:	1/4"