Mitsubishi WB-PA3 Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Mitsubishi WB-PA3 gratis online of download de PDF. Deze handleiding is 75 keer bekeken. Vraag over dit model? Stel een vraag
© 2017 Mitsubishi Electric US, Inc. Specications are subject to change without notice.
INSTALLATION MANUAL
For safe and correct use, please read this installation manual thoroughly before installing the advanced wind bafes.
English
FOR INSTALLER
Wind Bafe
WB-PA3
for use with:
MANUFACTURED FOR:
MITSUBISHI ELECTRIC US, INC.
WARNING! MOVING PARTS. INCORRECT HANDLING COULD LEAD TO DEATH OR INJURY!
IMPORTANT! Outdoor Unit should be installed with back coil surface facing a wall or oriented so the wind
does NOT blow directly on to the back coil surface. Do not install this product where there is any obstacle at
either side or above the outdoor unit. If the discharge air is obstructed the air may be short cycled.
STEPS:
1. Position wind bafe over fan guard and line up with pre-punched holes.
Install lower wind bafe rst to ease installation.
2. Insert the provided self-tapping screws into the top holes rst.
3. Install remaining screws and tighten all 4 screws securely. Repeat with all bafes.
ENSURE BAFFLE OUTLETS WILL NOT BE BLOCKED OR OBSTRUCTED !
PUZ-HA42NKA; PUMY-P60NKMU;
PUMY-P36/P48/P60NKMU1; PUY/Z-A36/A42NKA7
Outdoor Units
Product specificaties
| Merk: | Mitsubishi |
| Categorie: | Niet gecategoriseerd |
| Model: | WB-PA3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Mitsubishi WB-PA3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden