Minox DC 6022 Handleiding

Minox Niet gecategoriseerd DC 6022

Lees hieronder de 📖 handleiding in het Nederlandse voor Minox DC 6022 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

See reverse side for more information

10/12

BC266

User’s Manual for Biometric Safe

* Actual model may vary

A. Initialization Button

B. Battery Compartment

C. Bolts

D. Fingerprint Scanner

E. Indicator Lights

F. Wake-Up Button

GETTING STARTED

1. Remove Emergency Keys from accessory package

2. To expose the Emergency Key access, remove Logo Plate

(G) screws with provided tool

3. Insert Emergency Key into key access, push and turn

counter-clockwise

4. Turn Handle (H) clockwise to open the safe

5. Continue with INSTALL BATTERIES

INSTALL BATTERIES

1. Remove Battery Compartment (B) cover

2. Insert 4 AA batteries and restore battery cover

3. Continue with FINGERPRITN REGISTRATION

FINGERPRINT REGISTRATION

IMPORTANT: The safe is in either Pre-registered mode or

Factory Default mode, test safe to determine factory settings

below

Pre-registered mode: Safe can NOT be opened with any

fingerprint(s)

Factory Default mode: Safe can be opened with ANY

fingerprint(s)

1. With the safe door open, press and release Initialization

Button (A)

2. Immediately place a finger on the Fingerprint Scanner (D)

- Hold finger still

- 1 beep will be heard recognizing the fingerprint; followed by

2 consecutive beeps

- Remove finger

- Registration is complete

Successful Registration

Registration is successful when a total of 3 beeps are heard

Unsuccessful Registration

2 short beeps will be heard; repeat registration process again

3. To register another fingerprint - repeat steps 1 – 2

4. Continue with TEST (NON) REGISTERED FINGERPRINTS

TEST (NON) REGISTERED FINGERPRINTS

1. Test multiple Non-Registered fingerprints

- Close safe door, turn Handle (H) counter-clockwise to

lock the safe

- Press and release Wake-Up Button (F)

- Place a non-registered finger on the Fingerprint Scanner (D)

- Turn Handle (H) clockwise, the door should not open

- If the door opens with a non-registered fingerprint,

registration was unsuccessful; the safe is still in Factory

Default mode

- Repeat steps under FINGERPRINT REGISTRATION, and

test multiple non-registered fingerprints

2. Test a Registered fingerprint

- With door closed, press and release Wake-Up Button (F)

- Place a registered finger on the Fingerprint Scanner (D)

- Turn Handle (H) clockwise, the door should open

- Registration was successful, if it only opened with registered

fingerprint(s)

CLOSE/OPEN SAFE DOOR

CLOSE: Close safe door, turn Handle (H) counter-clockwise to

lock the safe

OPEN: Press and release Wake-Up Button (F)

- Place a registered finger on Fingerprint Scanner (D)

- Turn Handle (H) clockwise to open the safe

BEEP SOUND OPTIONS

Beep OFF: Press and HOLD the Initialization Button (A) (20 -

30 seconds) until the Indicator Lights (E) flash green once

- RELEASE the Initialization Button

Beep ON: Press and HOLD the Initialization Button (A) (20 -

30 seconds) until the Indicator Lights (E) flash green, followed

by 1 beep

- RELEASE the Initialization Button

OPEN SAFE WITH EMERGENCY KEY

1. To expose the Emergency Key access, remove Logo

Plate (G) screws with provided tool

2. Insert Emergency Key into key access, push and turn key

counter-clockwise, and turn Handle (H) clockwise to open

the safe

NOTE: Store Emergency Keys in a secure place, NOT inside of

the safe

OPEN SAFE WITH EXTERNAL BATTERY PACK

Use this option when internal batteries are low

1. Insert 4 AA batteries into External Battery Pack (I)

2. Plug into External Battery Access (J)

G. Logo Plate and Emergency

Key Access

H. Handle

I. External Battery Pack

(batteries not included)

J. External Battery Access

WARNING

- New Safe is in either Pre-registered mode or Factory

Default mode; ANY fingerprint can open the safe. Only

a successfully registered Fingerprint(s) can terminate

Factory Default mode.

- Register at least two different fingerprints and test a

few times before closing the safe door.

- Test with a non-registered fingerprint. If the safe

opens, the safe is still in Factory Default mode.

- Avoid leaving safe door open and unattended; it will

allow unauthorized individuals to add their fingerprints

and/or reprogram the safe, gaining full access to the

safe and the contents.

- Test the Emergency Keys and store them in a secure

place, NOT inside of the safe.

- To maximize the security and performance of the

safe, test registered fingerprints every 6 months.

- Initialization button cover must be restored after

every use.

- If user resets the safe to Factory Default mode: ANY

fingerprint can open the safe.

Read all instructions before using this safe.

BARSKA warrants this new safe to be free of original defects in

material and/or workmanship under normal use for a period of twelve

(12) months from the date product is received by purchaser. This

warranty does not include damage caused by improper installation or

maintenance. Damage from misuse, abuse, accident (such as

dropping), normal wear and tear, fire, flood, or acts of nature. Damage

from service or repairs other than those performed by BARSKA.

Labor, cost and shipping charges for the removal and replacement of

defective parts beyond the initial twelve-month warranty period. All

transportation and shipping charges. Removing or altering the seal

under any circumstances will automatically void the warranty.

This warranty is limited to original purchaser and is not transferable.

This warranty applies only to products purchased in the United States.

Please email info@barska.com or call 1.888.666.6769 for Return

Merchandise Number (RMA#) before any returns. The RMA number

must appear on the outside of the shipping package. Product must be

packed carefully and sturdily in its original packaging to prevent

damage in transit and returned freight pre-paid to:

BARSKA OPTICS

Repair Department

1721 Wright Avenue

La Verne, CA 91750

Please include all of the following when returning BARSKA products

for service and/or replacement:

1. Please write your complete details (Name, Address, Telephone #,

E-mail address, RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect.

4. A Check/Money Order of to cover inspection, shipping and $60.00

handling.

*Please allow 6-8 weeks for delivery.

BARSKA will examine and test returned product and repair or replace

defective part(s) or units with new part(s) or a new unit if necessary

within the warranty period. Purchaser is required to remit to $60.00

BARSKA for return shipping and handling at time product is returned.

If repair is required after warranty period expiration, purchaser will be

charged for replacement parts and return shipping.

BARSKA® Optics shall not be liable for any consequential, incidental

and/or contingent damages whatsoever. We will not pay shipping,

insurance or transportation charges from you to us, or any import

fees, duties and or taxes. This warranty supersedes all previous

BARSKA® Optics warranties.

Biometric Safe

1 YEAR LIMITED WARRANTY

BC240 9/12

3. Press and release Wake-Up Button (F)

- Place a registered finger on Fingerprint Scanner (D)

- Turn Handle (H) clockwise to open the safe

DELETE ALL STORED FINGERPRINTS / RESET TO

FACTORY DEFAULT MODE

1. Open safe, remove Battery Compartment (B) cover and

all 4 AA batteries

2. Press and release Wake-Up Button (F) a few times until no

beeps are heard

3. Press and HOLD the Initialization Button (A)

- Re-insert batteries; on the 4th battery you will hear 1

beep, followed by 2 consecutive beeps indicating safe is

in Factory Default mode

4. RELEASE Initialization Button (A)

5. Repeat steps 1-3 if a total of 3 beeps are not heard

6. Restore Battery Compartment (B) cover

7. All fingerprints stored in the safe have been deleted

NOTE: The safe is in Factory Default mode, ANY fingerprint

can open the safe

8. Continue with FINGERPRINT REGISTRATION and TEST

(NON) REGISTERED FINGERPRINTS

LOW BATTERY WARNING

1. When the door is closed and 3 repetitive beeps are heard,

and Indicator Lights (E) flash red, it indicates the batteries

are low

2. Replace batteries immediately

- Open safe, remove Battery Compartment (B) cover and

all 4 AA batteries

- Insert 4 new AA batteries and restore Battery

Compartment (B) cover

NOTE: All registered fingerprints remain stored

CARE AND MAINTENANCE

- To maximize the security and performance of the safe, keep

Fingerprint Scanner (D) clean; use a dry cloth to remove

any smudges or prints off the Fingerprint Scanner after

each use

- Test registered fingerprints every 6 months

- Keep liquids away from the control panel. Spills on the

control panel will cause damage and possibly electric shock

- Secure safe in a proper area to prevent from falling and

causing damage or injury

- DO NOT disassemble the product. For all repairs, contact

BARSKA Customer Service

- DO NOT use chemicals or cleaning agents to clean the safe

MOUNTING INSTRUCTIONS

The safe may be mounted to a wall or

floor. Be aware of the load bearing.

Failure to do so can result in personal

injury and/or damage to property. Use

appropriate tools when performing

work and always use eye protection

Wall Mounting

Do not mount the safe without

anchoring to the wall

- Find the studs in the wall, at your

desired location. Most studs

are 16 inches or 24 inches apart

- Check the wall for concealed wires

or pipes

- Measure the location of the pre-set drill holes; mark their exact

position onto the wall ensuring that the studs or anything else

behind will not interfere

- Drill the appropriate size holes for the anchors you are using

- Carefully press the anchor into the holes at this time

- Mount the safe by running screws from inside of the safe

and securing to anchors; ensure the safe is mounted securely

Floor Mounting

- Use proper drill tools depending on the type of floor you are

mounting the safe (wood, tile, or concrete)

- Measure the location of the pre-set drill holes; mark their

exact position onto the floor

- Drill the appropriate size holes for the anchors you are using

- Carefully press the anchor into the holes at this time

- Mount the safe by running screws from inside of the safe

and securing to anchors; ensure the safe is

mounted securely

Mounting Holes

* Actual model may vary

1721 Wright Ave | La Verne, CA 91750 | USA

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

Product specificaties

Merk:	Minox
Categorie:	Niet gecategoriseerd
Model:	DC 6022

Heb je hulp nodig?

Als je hulp nodig hebt met Minox DC 6022 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Minox

Minox DD 100 Handleiding

26 Augustus 2023

Minox 35 PE Handleiding

26 Augustus 2023

Minox DC 9011 Handleiding

26 Augustus 2023

Minox B Handleiding

26 Augustus 2023

Minox LX Handleiding

26 Augustus 2023

Minox DC 6022 Handleiding

26 Augustus 2023

Minox DC 8011 Handleiding

26 Augustus 2023

Minox DC 7011 Handleiding

26 Augustus 2023

Minox 35 GT Handleiding

26 Augustus 2023

Minox DC 7022 Handleiding

26 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024