Milwaukee M18 Fuel 2821-22 Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Milwaukee M18 Fuel 2821-22 (16 pagina's) in de categorie Accu. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
Cat. No. / No de cat.
2821-20
M18 FUEL™ SAWZALL ® RECIPROCATING SAW
SCIE ALTERNATIVE SAWZALL ® M18 FUEL™
SIERRA ALTERNATIVA SAWZALL ® DE M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to îšżre or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range speciîšżed in the instructions. Charging im-
properly or at temperatures outside the speciîšżed range
may damage the battery and increase the risk of îšżre.
SERVICE
• Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
SAWZALL® RECIPROCATING SAW
• Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting ac-
cessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
• Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body leaves
it unstable and may lead to loss of control.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an OSHA
compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
îšżlter out microscopic particles.
SPECIFICATIONS
Cat. No. 2821-20
.....................................................
Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
No Load Strokes per Minute ...................... 0 - 3000
Length of Stroke ............................................1-1/4"
Recommended Ambient
Operating Temperature ......................0°F to 125°F
SYMBOLOGY
Volts
Direct Current
No Load Strokes per Minute (SPM)
C US
UL Listing for Canada and U.S.
FUNCTIONAL DESCRIPTION
1. Shoe
2. Quik-Lok®
blade clamp
3. LED
4. Quik-Lok® blade
clamp release lever
5. Insulating boot
6. Trigger
7. Trigger lock
8. Handle
9. Shoe release buttons
10. Hang hook (not shown)
13457
9
8
6
2
ASSEMBLY
WARNING
Recharge only with the charger
speciîšżed for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove battery pack before
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories speciîšżcally
recommended for this tool. Others
may be hazardous.
Selecting a Blade
The Quik-Lok® Blade Clamp can be used with all 1/2"
shank universal Sawzall® reciprocating saw blades.
Use MILWAUKEE High Performance Super Sawzall®
reciprocating saw blades for best performance. When
selecting a blade, choose the right type and length.
Many types of blades are available for a variety of
applications: cutting metal, wood, nail-embedded
wood, scroll cutting, roughing-in, and contours.
Many lengths are also available. Choose a length
long enough to extend beyond the shoe and the work
throughout the stroke. Do not use blades less than
4" long since they won't extend beyond the shoe
throughout the stroke.
Installing and Removing Blades from the
Quik-Lok® Blade Clamp
Remove battery pack before changing blades. Make
sure the spindle and blade clamp areas are clean.
Metal chips and sawdust may prevent the Quik-Lok
®
Blade Clamp from clamping securely.
1. Remove battery pack.
2. Depending on the job, the blade may be inserted
with the teeth facing up or down. To install a blade,
insert the blade into the clamp until the tang butts
against the collar.
Product specificaties
| Merk: | Milwaukee |
| Categorie: | Accu |
| Model: | M18 Fuel 2821-22 |
Heb je hulp nodig?
Als je hulp nodig hebt met Milwaukee M18 Fuel 2821-22 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Accu Milwaukee
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
19 Maart 2024
29 Mei 2023
24 Mei 2023
27 April 2023
3 April 2023
Handleiding Accu
- Accu Bosch
- Accu Sony
- Accu Panasonic
- Accu Nikon
- Accu Epson
- Accu LG
- Accu Huawei
- Accu Canon
- Accu A-solar
- Accu Abus
- Accu Aluratek
- Accu Ansmann
- Accu Apc
- Accu Arris
- Accu Belkin
- Accu BlackVue
- Accu Digitus
- Accu DJI
- Accu Einhell
- Accu Energizer
- Accu Fein
- Accu Fluke
- Accu Fujifilm
- Accu Fuxtec
- Accu Gardena
- Accu Greenworks
- Accu Hama
- Accu Hikoki
- Accu Hikvision
- Accu HQ
- Accu Husqvarna
- Accu Kensington
- Accu Kress
- Accu Leica
- Accu McCulloch
- Accu Mestic
- Accu Metabo
- Accu Monacor
- Accu Nedis
- Accu Parkside
- Accu Ryobi
- Accu Sennheiser
- Accu Skil
- Accu Stiga
- Accu Stihl
- Accu Stinger
- Accu Toolcraft
- Accu Trust
- Accu Variotek
- Accu Varta
- Accu Vetus
- Accu Watson
- Accu Worx
- Accu Xtorm
- Accu Zipper
- Accu Ozito
- Accu Black And Decker
- Accu Sandberg
- Accu Shure
- Accu Petzl
- Accu Cocraft
- Accu Carat
- Accu Hilti
- Accu Conrad
- Accu Cobra
- Accu Biltema
- Accu Cramer
- Accu EGO
- Accu Techly
- Accu Deltaco
- Accu Scosche
- Accu Cortina
- Accu Duracell
- Accu PNY
- Accu Tripp Lite
- Accu Whistler
- Accu Victron Energy
- Accu Energenie
- Accu Thomann
- Accu CyberPower
- Accu Growatt
- Accu Lenmar
- Accu Hähnel
- Accu Speed-Link
- Accu For_Q
- Accu Genaray
- Accu Wentronic
- Accu Anton/Bauer
- Accu Arctic Cooling
- Accu Crestron
- Accu Bolt
- Accu Team Orion
- Accu SolarEdge
- Accu Inovonics
- Accu Red Power
- Accu Sungrow
- Accu Ultron
- Accu Enphase
- Accu E-flite
- Accu PowerDrive
- Accu LSI
- Accu Renata
- Accu Fxlion
- Accu PowerBass
- Accu SOUNDBOKS
- Accu FeinTech
- Accu Verico
- Accu Levolta
- Accu HART
- Accu TCW Technologies
- Accu Enerdrive
Nieuwste handleidingen voor Accu
26 April 2024
8 April 2024
8 April 2024
8 April 2024
28 Maart 2024
12 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
29 Februari 2024